You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
110 lines
3.2 KiB
110 lines
3.2 KiB
//
|
|
// Created by iflyt on 2025/3/2.
|
|
//
|
|
|
|
#ifndef T_RH_IIC_H
|
|
#define T_RH_IIC_H
|
|
|
|
#define ARM32 //定义该行为ARM类型,注释为C51类型
|
|
|
|
#ifdef ARM32
|
|
|
|
#define IIC_SDA_PORT GPIOF
|
|
#define SDA_Pin GPIO_PIN_0
|
|
|
|
#define IIC_SCL_PORT GPIOF
|
|
#define SCL_Pin GPIO_PIN_1
|
|
|
|
#else
|
|
#include "STC12C5A60S2.h"
|
|
|
|
#define IIC_SDA_PIN P03
|
|
#define IIC_SCL_PIN P02
|
|
|
|
#endif
|
|
//用户修改区
|
|
#define MYI2C_delay_us_cnt 16//延迟1微秒，所需的计数，请根据MCU调整
|
|
|
|
#define MYI2C_Tick 10//定时调用时间，单位:毫秒，请根据定时调用时间设置，定时调用时间设置范围1-100ms
|
|
#define MYI2C_Buffer_Size 20//接收缓冲数组大小，最大读取字节数
|
|
|
|
|
|
//内部定义，请勿擅自修改
|
|
#define Wait_Ack_time 199//等待ACK应答时间，单位:微秒
|
|
#define MinReadTim 500//读取传感器最小间隔时间，单位:毫秒
|
|
#define PowerOnTim 10//上电延迟10毫秒
|
|
#define MeasureTim 150//等待测量结果延迟150毫秒
|
|
|
|
#define SDA_OUT 0 //SDA设置为输出
|
|
#define SDA_IN 1 //SDA设置为输入
|
|
#define SCL_OUT 2 //SCL设置为输出
|
|
|
|
#define SDA_R 0 //读取SDA数据
|
|
#define SCL_H 1
|
|
#define SCL_L 2
|
|
#define SDA_H 3
|
|
#define SDA_L 4
|
|
|
|
#define SENSOR_IDLE 0 //
|
|
#define SENSOR_MEASURE 1 //
|
|
#define SENSOR_COMPLETE 2 //
|
|
|
|
#define MYI2C_SCK_OD_Mode MYI2C_GPIO_MODE(SCL_OUT)
|
|
#define MYI2C_SDA_OD_Mode MYI2C_GPIO_MODE(SDA_OUT)
|
|
#define MYI2C_SDA_IN_Mode MYI2C_GPIO_MODE(SDA_IN)
|
|
|
|
#define MYI2C_SCK_Clr() MYI2C_GPIO_DATA(SCL_L);MYI2C_Delay_us(2)
|
|
#define MYI2C_SCK_Set() MYI2C_GPIO_DATA(SCL_H);MYI2C_Delay_us(4)
|
|
|
|
#define MYI2C_SDA_Clr() MYI2C_GPIO_DATA(SDA_L);MYI2C_Delay_us(2)
|
|
#define MYI2C_SDA_Set() MYI2C_GPIO_DATA(SDA_H);MYI2C_Delay_us(2)
|
|
|
|
#define I2C_SDA_PIN P03
|
|
#define I2C_SCL_PIN P02
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
typedef struct
|
|
{
|
|
|
|
unsigned char Adrr;
|
|
unsigned int timcnt;
|
|
unsigned char ErrFlag;
|
|
unsigned char Step;
|
|
unsigned int SetRTim;
|
|
|
|
unsigned char SendByte[MYI2C_Buffer_Size];
|
|
unsigned char ReadByte[MYI2C_Buffer_Size];
|
|
float RH;//湿度
|
|
float T;//温度
|
|
}MYI2C_Struct;
|
|
|
|
extern MYI2C_Struct SENx;
|
|
|
|
/* Exported functions ------------------------------------------------------- */
|
|
void MYI2C_Init(MYI2C_Struct *pst,unsigned int ReadTimMS,unsigned char xAddr);
|
|
void MYI2C_Handle(MYI2C_Struct *pst);
|
|
/* Private functions ---------------------------------------------------------*/
|
|
void MYI2C_Delay_us(unsigned long nTim);
|
|
void MYI2C_IIC_Start(void);
|
|
void MYI2C_IIC_Stop(void);
|
|
void MYI2C_IIC_Ack(unsigned char ack);
|
|
unsigned char MYI2C_IIC_Wait_Ack(unsigned int wait_time);
|
|
void MYI2C_Write_IIC_Byte(unsigned char dat);
|
|
unsigned char MYI2C_Read_IIC_Byte(void);
|
|
//void MYI2C_Reset(void);
|
|
unsigned char MYI2C_READ_FUNC (MYI2C_Struct *pst,unsigned char device_addr,unsigned char register_addr,unsigned char *pDat,unsigned char len);
|
|
unsigned char MYI2C_WRITE_FUNC(MYI2C_Struct *pst,unsigned char device_addr,unsigned char register_addr,unsigned char *pDat,unsigned char len);
|
|
|
|
void MYI2C_GPIO_MODE(unsigned char TYP);
|
|
unsigned char MYI2C_GPIO_DATA(unsigned char TYP);
|
|
unsigned char CheckCrc8(unsigned char *pDat,unsigned char Lenth);
|
|
|
|
void ReadTemperatureAndHumidity(MYI2C_Struct *pst);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif //T_RH_IIC_H
|