diff --git a/src/main/resources/sql/init.sql b/src/main/resources/sql/init.sql
index ae3ae41..4354f3f 100644
--- a/src/main/resources/sql/init.sql
+++ b/src/main/resources/sql/init.sql
@@ -35,6 +35,26 @@ CREATE TABLE IF NOT EXISTS device_position
     create_time TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     update_time TIMESTAMP DEFAULT CURRENT_TIMESTAMP
 );
+INSERT OR IGNORE INTO device_position (id, name, code, type, position)
+VALUES ('1', '预充防滴落距离', 'antiDripDistance', 'DISTANCE', '0'),
+       ('2', '溶液首次预充距离', 'solutionPreFillDistance', 'DISTANCE', '10'),
+       ('3', '稀硝酸预充距离', 'thinPreFillDistance', 'DISTANCE', '10'),
+       ('4', '浓硝酸预充距离', 'thickPreFillDistance', 'DISTANCE', '10'),
+       ('5', '蒸馏水预充距离', 'waterPreFillDistance', 'DISTANCE', '10'),
+       ('6', '托盘试管水平间距', 'trayTubeHorizontalSpacingDistance', 'DISTANCE', '10'),
+       ('7', '转运模块X轴拿取托盘进出卡槽移动距离', 'transferModuleXPickTrayMoveDistance', 'DISTANCE', '3'),
+       ('8', '加液模块电机下降进入试管加液位置', 'solutionModuleMotorDownInTubeAddPositon', 'POSITION', '2'),
+       ('9', '加液模块电机下降进入试管抽取位置', 'solutionModuleMotorDownInTubeExtPositon', 'POSITION', '5'),
+       ('10', '转运模块Z轴拿取托盘时起下降的高度位置', 'transferModuleZPickTrayDownPositon', 'POSITION', '2'),
+       ('11', '开门位置', 'doorOpenPosition', 'POSITION', '10'),
+       ('12', '关门位置', 'doorClosePosition', 'POSITION', '0'),
+       ('13', '上料区托盘夹爪位置点', 'feedAreaTrayPoint', 'POINT_3D', '10,10,10'),
+       ('14', '加液时托盘位置点', 'liquidAreaTrayPoint', 'POINT_3D', '10,10,10'),
+       ('15', '加热区1托盘夹爪位置点', 'heatArea1TrayClawPoint', 'POINT_3D', '10,10,10'),
+       ('16', '加热区2托盘夹爪位置点', 'heatArea2TrayClawPoint', 'POINT_3D', '10,10,10'),
+       ('17', '加热区3托盘夹爪位置点', 'heatArea3TrayClawPoint', 'POINT_3D', '10,10,10'),
+       ('18', '加热区4托盘夹爪位置点', 'heatArea4TrayClawPoint', 'POINT_3D', '10,10,10');
+
 
 -- 系统配置 表
 CREATE TABLE IF NOT EXISTS system_config
@@ -46,11 +66,17 @@ CREATE TABLE IF NOT EXISTS system_config
     create_time TIMESTAMP DEFAULT CURRENT_TIMESTAMP,
     update_time TIMESTAMP DEFAULT CURRENT_TIMESTAMP
 );
+
 INSERT OR IGNORE INTO system_config (id, name, code, value)
-VALUES ('1', '稀硝酸容量与泵行程比率', 'scale_thin', '100'),
-       ('2', '浓硝酸容量与泵行程比率', 'scale_thick', '100'),
-       ('3', '蒸馏水容量与泵行程比率', 'scale_water', '100'),
-       ('4', '废液容量与泵行程比率', 'scale_waste', '100');
+VALUES ('1', '稀硝酸容量与泵行程比率', 'scale_thin', '1'),
+       ('2', '浓硝酸容量与泵行程比率', 'scale_thick', '1'),
+       ('3', '蒸馏水容量与泵行程比率', 'scale_water', '1'),
+       ('4', '废液容量与泵行程比率', 'scale_waste', '1'),
+       ('5', '蒸馏水容量与泵行程比率', 'scale_vacant', '1'),
+       ('6', '空气转换系数', 'volume_clean', '1'),
+       ('7', '清洁时加水的量 ml', 'number_reduce', '5'),
+       ('8', '抽液时机蠕动泵的转数', 'cycle_clean_max', '8'),
+       ('9', '蠕动泵最大转速限制', 'liquid_max_speed', '150');
 
 
 -- 系统日志 表