p_Intelligent_winding_robot_v2
/
Intelligent_winding_robot_zarm
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

v1.0.0

master
zhaohe 2 years ago
parent
9fdbeea4ef
commit
19e10384be
7 changed files with 32 additions and 31 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Core/Inc/FreeRTOSConfig.h
  2. 4
      Core/Src/usart.c
  3. 9
      Intelligent_winding_robot_zarm.ioc
  4. 2
      Intelligent_winding_robot_zarm.launch
  5. 2
      sdk
  6. 42
      usrc/main.cpp
  7. 2
      usrc/project_configs.h

2
Core/Inc/FreeRTOSConfig.h
View File

@ -64,7 +64,7 @@
#define configTICK_RATE_HZ ((TickType_t)1000)
#define configMAX_PRIORITIES ( 7 )
#define configMINIMAL_STACK_SIZE ((uint16_t)128)
#define configTOTAL_HEAP_SIZE ((size_t)15360)
#define configTOTAL_HEAP_SIZE ((size_t)20000)
#define configMAX_TASK_NAME_LEN ( 16 )
#define configUSE_16_BIT_TICKS 0
#define configUSE_MUTEXES 1

4
Core/Src/usart.c
View File

@ -103,7 +103,7 @@ void MX_USART2_UART_Init(void)
/* USER CODE END USART2_Init 1 */
huart2.Instance = USART2;
huart2.Init.BaudRate = 38400;
huart2.Init.BaudRate = 115200;
huart2.Init.WordLength = UART_WORDLENGTH_8B;
huart2.Init.StopBits = UART_STOPBITS_1;
huart2.Init.Parity = UART_PARITY_NONE;
@ -132,7 +132,7 @@ void MX_USART3_UART_Init(void)
/* USER CODE END USART3_Init 1 */
huart3.Instance = USART3;
huart3.Init.BaudRate = 9600;
huart3.Init.BaudRate = 115200;
huart3.Init.WordLength = UART_WORDLENGTH_8B;
huart3.Init.StopBits = UART_STOPBITS_1;
huart3.Init.Parity = UART_PARITY_NONE;

9
Intelligent_winding_robot_zarm.ioc
View File

@ -67,10 +67,11 @@ Dma.USART2_TX.1.PeriphInc=DMA_PINC_DISABLE
Dma.USART2_TX.1.Priority=DMA_PRIORITY_LOW
Dma.USART2_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority,FIFOMode
FREERTOS.FootprintOK=true
FREERTOS.IPParameters=Tasks01,FootprintOK,configUSE_NEWLIB_REENTRANT,configUSE_RECURSIVE_MUTEXES,configUSE_COUNTING_SEMAPHORES,configRECORD_STACK_HIGH_ADDRESS,configENABLE_FPU
FREERTOS.IPParameters=Tasks01,FootprintOK,configUSE_NEWLIB_REENTRANT,configUSE_RECURSIVE_MUTEXES,configUSE_COUNTING_SEMAPHORES,configRECORD_STACK_HIGH_ADDRESS,configENABLE_FPU,configTOTAL_HEAP_SIZE
FREERTOS.Tasks01=defaultTask,-3,1024,StartDefaultTask,As weak,NULL,Dynamic,NULL,NULL
FREERTOS.configENABLE_FPU=1
FREERTOS.configRECORD_STACK_HIGH_ADDRESS=1
FREERTOS.configTOTAL_HEAP_SIZE=20000
FREERTOS.configUSE_COUNTING_SEMAPHORES=1
FREERTOS.configUSE_NEWLIB_REENTRANT=1
FREERTOS.configUSE_RECURSIVE_MUTEXES=1
@ -269,7 +270,7 @@ ProjectManager.ToolChainLocation=
ProjectManager.UAScriptAfterPath=
ProjectManager.UAScriptBeforePath=
ProjectManager.UnderRoot=true
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_CRC_Init-CRC-false-HAL-true,7-MX_RNG_Init-RNG-false-HAL-true,8-MX_TIM7_Init-TIM7-false-HAL-true,9-MX_SPI1_Init-SPI1-false-HAL-true,10-MX_TIM6_Init-TIM6-false-HAL-true,11-MX_TIM1_Init-TIM1-false-HAL-true,12-MX_CAN1_Init-CAN1-false-HAL-true,13-MX_USART3_UART_Init-USART3-false-HAL-true,14-MX_I2C1_Init-I2C1-false-HAL-true,15-MX_ADC1_Init-ADC1-false-HAL-true,16-MX_TIM2_Init-TIM2-false-HAL-true,17-MX_USART2_UART_Init-USART2-false-HAL-true
ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_TIM3_Init-TIM3-false-HAL-true,6-MX_CRC_Init-CRC-false-HAL-true,7-MX_RNG_Init-RNG-false-HAL-true,8-MX_TIM7_Init-TIM7-false-HAL-true,9-MX_SPI1_Init-SPI1-false-HAL-true,10-MX_TIM6_Init-TIM6-false-HAL-true,11-MX_TIM1_Init-TIM1-false-HAL-true,12-MX_CAN1_Init-CAN1-false-HAL-true,13-MX_USART3_UART_Init-USART3-false-HAL-true,14-MX_I2C1_Init-I2C1-false-HAL-true,15-MX_ADC1_Init-ADC1-false-HAL-true,16-MX_TIM2_Init-TIM2-false-HAL-true,17-MX_USART2_UART_Init-USART2-false-HAL-true,18-MX_UART4_Init-UART4-false-HAL-true
RCC.48MHZClocksFreq_Value=48000000
RCC.AHBFreq_Value=144000000
RCC.APB1CLKDivider=RCC_HCLK_DIV4
@ -355,10 +356,10 @@ UART4.VirtualMode=Asynchronous
USART1.BaudRate=961200
USART1.IPParameters=VirtualMode,BaudRate
USART1.VirtualMode=VM_ASYNC
USART2.BaudRate=9600
USART2.BaudRate=115200
USART2.IPParameters=VirtualMode,BaudRate
USART2.VirtualMode=VM_ASYNC
USART3.BaudRate=9600
USART3.BaudRate=115200
USART3.IPParameters=VirtualMode,BaudRate
USART3.VirtualMode=VM_ASYNC
VP_CRC_VS_CRC.Mode=CRC_Activate

2
Intelligent_winding_robot_zarm.launch
View File

@ -51,7 +51,7 @@
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.low_power_debug" value="disable"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.max_halt_delay" value="2"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.reset_strategy" value="system_reset"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="true"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_check_serial_number" value="false"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.stlink_txt_serial_number" value="0046002C3132510838363431"/>
<stringAttribute key="com.st.stm32cube.ide.mcu.debug.stlink.watchdog_config" value="none"/>
<booleanAttribute key="com.st.stm32cube.ide.mcu.debug.stlinkenable_rtos" value="false"/>

2
sdk

@ -1 +1 @@
Subproject commit 283569575d2fdfa9a9719bbcfba1d874d52aff8f
Subproject commit 85b827815841cd0ad95352d5ee5917a6034c45e3

42
usrc/main.cpp
View File

@ -55,17 +55,17 @@ static void initsubmodule() {
input[0].initAsInput(MOTOR0_REFL /*REFL*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);
input[1].initAsInput(MOTOR0_REFR /*REFR*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);
I_StepMotorCtrlModule::flash_config_t smcm_cfg = {0};
StepMotorCtrlModule::flash_config_t smcm_cfg = {0};
StepMotorCtrlModule::create_default_cfg(smcm_cfg);
smcm_cfg.base_param.distance_scale = 80;
smcm_cfg.base_param.distance_scale_denominator = 1;
smcm_cfg.base_param.ihold = 1;
smcm_cfg.base_param.irun = 8;
smcm_cfg.base_param.x_shaft = false;
smcm_cfg.base_param.maxspeed = 500;
smcm_cfg.base_param.run_to_zero_speed = 100;
smcm_cfg.base_param.max_x = 0;
smcm_cfg.base_param.min_x = 0;
smcm_cfg.base_param.motor_one_circle_pulse = 80;
smcm_cfg.base_param.motor_one_circle_pulse_denominator = 1;
smcm_cfg.base_param.stepmotor_ihold = 1;
smcm_cfg.base_param.stepmotor_irun = 8;
smcm_cfg.base_param.motor_shaft = false;
smcm_cfg.base_param.motor_default_velocity = 500;
smcm_cfg.base_param.motor_run_to_zero_speed = 100;
smcm_cfg.base_param.max_d = 0;
smcm_cfg.base_param.min_d = 0;
g_stepMotorCtrlModule.initialize(initer.get_module_id(1), &g_motor, input, ZARRAY_SIZE(input), nullptr, &smcm_cfg);
initer.register_module(&g_stepMotorCtrlModule);
@ -92,17 +92,17 @@ static void initsubmodule() {
input[0].initAsInput(MOTOR1_REFL /*REFL*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);
input[1].initAsInput(MOTOR1_REFR /*REFR*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);
I_StepMotorCtrlModule::flash_config_t smcm_cfg = {0};
StepMotorCtrlModule::flash_config_t smcm_cfg = {0};
StepMotorCtrlModule::create_default_cfg(smcm_cfg);
smcm_cfg.base_param.distance_scale = 80;
smcm_cfg.base_param.distance_scale_denominator = 1;
smcm_cfg.base_param.ihold = 1;
smcm_cfg.base_param.irun = 8;
smcm_cfg.base_param.x_shaft = false;
smcm_cfg.base_param.maxspeed = 500;
smcm_cfg.base_param.run_to_zero_speed = 100;
smcm_cfg.base_param.max_x = 0;
smcm_cfg.base_param.min_x = 0;
smcm_cfg.base_param.motor_one_circle_pulse = 100;
smcm_cfg.base_param.motor_one_circle_pulse_denominator = 1;
smcm_cfg.base_param.stepmotor_ihold = 4;
smcm_cfg.base_param.stepmotor_irun = 16;
smcm_cfg.base_param.motor_shaft = true;
smcm_cfg.base_param.motor_default_velocity = 50;
smcm_cfg.base_param.motor_run_to_zero_speed = 50;
smcm_cfg.base_param.max_d = 0;
smcm_cfg.base_param.min_d = 0;
g_stepMotorCtrlModule.initialize(initer.get_module_id(2), &g_motor, input, ZARRAY_SIZE(input), nullptr, &smcm_cfg);
initer.register_module(&g_stepMotorCtrlModule);
@ -122,7 +122,7 @@ static void initsubmodule() {
feiteservomotor_bus.initialize(&huart2, &hdma_usart2_rx, &hdma_usart2_tx);
static MiniRobotCtrlModule::flash_config_t cfg = {0};
cfg.default_torque = 100;
cfg.default_torque = 400;
mini_servo.initialize(initer.get_module_id(3), &feiteservomotor_bus, 1, &cfg);
initer.register_module(&mini_servo);
}

2
usrc/project_configs.h
View File

@ -1,5 +1,5 @@
#pragma once
#define PC_VERSION "v1.0.1"
#define PC_VERSION "v1.0.0"
#define PC_MANUFACTURER "http://www.iflytop.com/"
#define PC_PROJECT_NAME "Intelligent_winding_robot_zarm"
#define PC_IFLYTOP_ENABLE_OS 1

Write Preview
Loading…
Cancel
Save