#include <stddef.h>
#include <stdio.h>

#include "board.h"
#include "sdk\components\subcanmodule\zcancmder_subboard_initer.hpp"
/*******************************************************************************
 *                               PROJECT_INCLUDE                               *
 *******************************************************************************/
#include "sdk/components/step_motor_ctrl_module/step_motor_ctrl_module.hpp"
#include "sdk\components\mini_servo_motor\feite_servo_motor.hpp"
#include "sdk\components\mini_servo_motor\mini_servo_motor_ctrl_module.hpp"
#include "sdk\components\pipette_module\pipette_ctrl_module_v2.hpp"
#include "sdk\components\sensors\m3078\m3078_code_scaner.hpp"
#include "sdk\components\tmc\ic\ztmc4361A.hpp"
#include "sdk\components\tmc\ic\ztmc5130.hpp"

#define TAG "main"
using namespace iflytop;
using namespace std;

static ZCancmderSubboardIniter initer;

extern void umain();
extern "C" {
void StartDefaultTask(void const* argument) { umain(); }
}
/*******************************************************************************
 *                                GET_DEVICE_ID                                *
 *******************************************************************************/
static int32_t getDeviceId() { return BOARD_ID; }
/*******************************************************************************
 *                               INIT_SUBMODULE                                *
 *******************************************************************************/
void        nvs_init_cb() {}
static void initsubmodule() {
  osDelay(1000);
  {
    static TMC5130             g_motor;
    static StepMotorCtrlModule g_stepMotorCtrlModule;
    TMC5130::cfg_t             cfg = {
                    .spi             = &TMC_MOTOR_SPI,          //
                    .csgpio          = MOTOR0_CSN,              //
                    .ennPin          = MOTOR0_ENN,              //
                    .spi_mode_select = MOTOR0_SPI_MODE_SELECT,  //
    };
    g_motor.initialize(&cfg);
    ZLOGI(TAG, "motora initialize 5160:%x ", g_motor.readICVersion());

    g_motor.setMotorShaft(false);
    g_motor.setAcceleration(100);
    g_motor.setDeceleration(100);
    g_motor.setIHOLD_IRUN(0, 8, 10);

    static ZGPIO input[10];
    input[0].initAsInput(MOTOR0_REFL /*REFL*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);
    input[1].initAsInput(MOTOR0_REFR /*REFR*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);

    StepMotorCtrlModule::flash_config_t smcm_cfg = {0};
    StepMotorCtrlModule::create_default_cfg(smcm_cfg);
    smcm_cfg.base_param.motor_one_circle_pulse             = 80;
    smcm_cfg.base_param.motor_one_circle_pulse_denominator = 1;
    smcm_cfg.base_param.stepmotor_ihold                    = 1;
    smcm_cfg.base_param.stepmotor_irun                     = 8;
    smcm_cfg.base_param.motor_shaft                        = false;
    smcm_cfg.base_param.motor_default_velocity             = 500;
    smcm_cfg.base_param.motor_run_to_zero_speed            = 100;
    smcm_cfg.base_param.max_d                              = 0;
    smcm_cfg.base_param.min_d                              = 0;

    g_stepMotorCtrlModule.initialize(initer.get_module_id(1), &g_motor, input, ZARRAY_SIZE(input), nullptr, &smcm_cfg);
    initer.register_module(&g_stepMotorCtrlModule);
  }

  {
    static TMC5130             g_motor;
    static StepMotorCtrlModule g_stepMotorCtrlModule;
    TMC5130::cfg_t             cfg = {
                    .spi             = &TMC_MOTOR_SPI,          //
                    .csgpio          = MOTOR1_CSN,              //
                    .ennPin          = MOTOR1_ENN,              //
                    .spi_mode_select = MOTOR1_SPI_MODE_SELECT,  //
    };
    g_motor.initialize(&cfg);
    ZLOGI(TAG, "motora initialize 5160:%x ", g_motor.readICVersion());

    g_motor.setMotorShaft(false);
    g_motor.setAcceleration(100);
    g_motor.setDeceleration(100);
    g_motor.setIHOLD_IRUN(0, 8, 10);

    static ZGPIO input[10];
    input[0].initAsInput(MOTOR1_REFL /*REFL*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);
    input[1].initAsInput(MOTOR1_REFR /*REFR*/, ZGPIO::kMode_nopull, ZGPIO::kIRQ_noIrq, true);

    StepMotorCtrlModule::flash_config_t smcm_cfg = {0};
    StepMotorCtrlModule::create_default_cfg(smcm_cfg);
    smcm_cfg.base_param.motor_one_circle_pulse             = 100;
    smcm_cfg.base_param.motor_one_circle_pulse_denominator = 1;
    smcm_cfg.base_param.stepmotor_ihold                    = 4;
    smcm_cfg.base_param.stepmotor_irun                     = 16;
    smcm_cfg.base_param.motor_shaft                        = true;
    smcm_cfg.base_param.motor_default_velocity             = 50;
    smcm_cfg.base_param.motor_run_to_zero_speed            = 50;
    smcm_cfg.base_param.max_d                              = 0;
    smcm_cfg.base_param.min_d                              = 0;

    g_stepMotorCtrlModule.initialize(initer.get_module_id(2), &g_motor, input, ZARRAY_SIZE(input), nullptr, &smcm_cfg);
    initer.register_module(&g_stepMotorCtrlModule);
  }

  {
    {
      {
        /*******************************************************************************
         *                                 试管夹舵机                                  *
         *******************************************************************************/
        static FeiTeServoMotor     feiteservomotor_bus;  // 飞特舵机总线
        static MiniRobotCtrlModule mini_servo;

        // 飞特舵机总线
        ZASSERT(huart2.Init.BaudRate == 115200);
        feiteservomotor_bus.initialize(&huart2, &hdma_usart2_rx, &hdma_usart2_tx);

        static MiniRobotCtrlModule::flash_config_t cfg = {0};
        cfg.default_torque                             = 400;
        mini_servo.initialize(initer.get_module_id(3), &feiteservomotor_bus, 1, &cfg);
        initer.register_module(&mini_servo);
      }

      // {
      //   // 115200
      //   /*******************************************************************************
      //    *******************************************************************************/
      //   static FeiTeServoMotor     feiteservomotor_bus;  // 飞特舵机总线
      //   static MiniRobotCtrlModule mini_servo;

      //   // 飞特舵机总线
      //   ZASSERT(huart3.Init.BaudRate == 115200);
      //   feiteservomotor_bus.initialize(&huart3, &hdma_usart3_rx, &hdma_usart3_tx);

      //   static MiniRobotCtrlModule::flash_config_t cfg = {0};
      //   cfg.default_torque                             = 330;
      //   mini_servo.initialize(initer.get_module_id(4), &feiteservomotor_bus, 2, &cfg);
      //   initer.register_module(&mini_servo);
      // }
    }
  }
}

/*******************************************************************************
 *                                    MAIN                                     *
 *******************************************************************************/
void umain() {
  ZCancmderSubboardIniter::cfg_t cfg =  //
      {
          .deviceId    = getDeviceId(),
          .input_gpio  = {},
          .output_gpio = {},
      };
  initer.init(&cfg);
  initsubmodule();
  initer.loop();
}