diff --git a/config/nrf52811/config/sdk_config.h b/config/nrf52811/config/sdk_config.h.demo
similarity index 100%
rename from config/nrf52811/config/sdk_config.h
rename to config/nrf52811/config/sdk_config.h.demo
diff --git a/config/nrf52820/config/sdk_config.h b/config/nrf52820/config/sdk_config.h.demo
similarity index 100%
rename from config/nrf52820/config/sdk_config.h
rename to config/nrf52820/config/sdk_config.h.demo
diff --git a/config/nrf52832/config/sdk_config.h b/config/nrf52832/config/sdk_config.h.demo
similarity index 100%
rename from config/nrf52832/config/sdk_config.h
rename to config/nrf52832/config/sdk_config.h.demo
diff --git a/config/nrf52833/config/sdk_config.h b/config/nrf52833/config/sdk_config.h.demo
similarity index 100%
rename from config/nrf52833/config/sdk_config.h
rename to config/nrf52833/config/sdk_config.h.demo
diff --git a/modules/nrfx/templates/nRF51/nrfx_config.h b/modules/nrfx/templates/nRF51/nrfx_config.h
deleted file mode 100644
index d080e88..0000000
--- a/modules/nrfx/templates/nRF51/nrfx_config.h
+++ /dev/null
@@ -1,1605 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_ADC_ENABLED - nrfx_adc - ADC peripheral driver
-//==========================================================
-#ifndef NRFX_ADC_ENABLED
-#define NRFX_ADC_ENABLED 1
-#endif
-// <o> NRFX_ADC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_ADC_CONFIG_IRQ_PRIORITY
-#define NRFX_ADC_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_ADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_ADC_CONFIG_LOG_ENABLED
-#define NRFX_ADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_ADC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_ADC_CONFIG_LOG_LEVEL
-#define NRFX_ADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_ADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_ADC_CONFIG_INFO_COLOR
-#define NRFX_ADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_ADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_ADC_CONFIG_DEBUG_COLOR
-#define NRFX_ADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
-//==========================================================
-#ifndef NRFX_LPCOMP_ENABLED
-#define NRFX_LPCOMP_ENABLED 1
-#endif
-// <o> NRFX_LPCOMP_CONFIG_REFERENCE  - Reference voltage
-
-// <0=> Supply 1/8
-// <1=> Supply 2/8
-// <2=> Supply 3/8
-// <3=> Supply 4/8
-// <4=> Supply 5/8
-// <5=> Supply 6/8
-// <6=> Supply 7/8
-// <8=> Supply 1/16 (nRF52)
-// <9=> Supply 3/16 (nRF52)
-// <10=> Supply 5/16 (nRF52)
-// <11=> Supply 7/16 (nRF52)
-// <12=> Supply 9/16 (nRF52)
-// <13=> Supply 11/16 (nRF52)
-// <14=> Supply 13/16 (nRF52)
-// <15=> Supply 15/16 (nRF52)
-// <7=> External Ref 0
-// <65543=> External Ref 1
-
-#ifndef NRFX_LPCOMP_CONFIG_REFERENCE
-#define NRFX_LPCOMP_CONFIG_REFERENCE 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DETECTION  - Detection
-
-// <0=> Crossing
-// <1=> Up
-// <2=> Down
-
-#ifndef NRFX_LPCOMP_CONFIG_DETECTION
-#define NRFX_LPCOMP_CONFIG_DETECTION 2
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_INPUT
-#define NRFX_LPCOMP_CONFIG_INPUT 0
-#endif
-
-// <q> NRFX_LPCOMP_CONFIG_HYST  - Hysteresis
-
-
-#ifndef NRFX_LPCOMP_CONFIG_HYST
-#define NRFX_LPCOMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY
-#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED
-#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL
-#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR
-#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR
-#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS1_ENABLED  - Enable SPIS1 instance
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// <q> NRFX_SPI1_ENABLED  - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-// <q> NRFX_TWI1_ENABLED  - Enable TWI1 instance
-
-
-#ifndef NRFX_TWI1_ENABLED
-#define NRFX_TWI1_ENABLED 1
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 3
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF52810/nrfx_config.h b/modules/nrfx/templates/nRF52810/nrfx_config.h
deleted file mode 100644
index 4abea9f..0000000
--- a/modules/nrfx/templates/nRF52810/nrfx_config.h
+++ /dev/null
@@ -1,2415 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-// <131073=> External Low Swing
-// <196609=> External Full Swing
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// <o> NRFX_COMP_CONFIG_REF  - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// <o> NRFX_COMP_CONFIG_MAIN_MODE  - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_SPEED_MODE  - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// <o> NRFX_COMP_CONFIG_HYST  - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_ISOURCE  - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_COMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// <o> NRFX_PDM_CONFIG_MODE  - Mode
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// <o> NRFX_PDM_CONFIG_EDGE  - Edge
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_CLOCK_FREQ  - Clock frequency
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PDM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// <q> NRFX_PWM0_ENABLED  - Enable PWM0 instance
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK  - Base clock
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE  - Count mode
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE  - Load mode
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE  - Step mode
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PWM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// <o> NRFX_SAADC_CONFIG_OVERSAMPLE  - Sample period
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// <q> NRFX_SAADC_CONFIG_LP_MODE  - Enabling low power mode
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SAADC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enable TWIS0 instance
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assume that any instance would be initialized only once
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Remove support for synchronous mode
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF52811/nrfx_config.h b/modules/nrfx/templates/nRF52811/nrfx_config.h
deleted file mode 100644
index 96e053c..0000000
--- a/modules/nrfx/templates/nRF52811/nrfx_config.h
+++ /dev/null
@@ -1,2430 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-// <131073=> External Low Swing
-// <196609=> External Full Swing
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// <o> NRFX_COMP_CONFIG_REF  - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// <o> NRFX_COMP_CONFIG_MAIN_MODE  - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_SPEED_MODE  - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// <o> NRFX_COMP_CONFIG_HYST  - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_ISOURCE  - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_COMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// <o> NRFX_PDM_CONFIG_MODE  - Mode
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// <o> NRFX_PDM_CONFIG_EDGE  - Edge
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_CLOCK_FREQ  - Clock frequency
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PDM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// <q> NRFX_PWM0_ENABLED  - Enable PWM0 instance
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK  - Base clock
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE  - Count mode
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE  - Load mode
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE  - Step mode
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PWM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// <o> NRFX_SAADC_CONFIG_OVERSAMPLE  - Sample period
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// <q> NRFX_SAADC_CONFIG_LP_MODE  - Enabling low power mode
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SAADC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// <q> NRFX_SPI1_ENABLED  - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enable TWIS0 instance
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assume that any instance would be initialized only once
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Remove support for synchronous mode
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF52820/nrfx_config.h b/modules/nrfx/templates/nRF52820/nrfx_config.h
deleted file mode 100644
index 4fc106a..0000000
--- a/modules/nrfx/templates/nRF52820/nrfx_config.h
+++ /dev/null
@@ -1,2245 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-// <131073=> External Low Swing
-// <196609=> External Full Swing
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// <o> NRFX_COMP_CONFIG_REF  - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// <o> NRFX_COMP_CONFIG_MAIN_MODE  - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_SPEED_MODE  - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// <o> NRFX_COMP_CONFIG_HYST  - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_ISOURCE  - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_COMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
-#define NRFX_I2S_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_I2S_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
-#define NRFX_I2S_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_I2S_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_INFO_COLOR
-#define NRFX_I2S_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
-#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM1_ENABLED  - Enable SPIM1 instance
-
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS1_ENABLED  - Enable SPIS1 instance
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// <q> NRFX_SPI1_ENABLED  - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER3_ENABLED  - Enable TIMER3 instance
-
-
-#ifndef NRFX_TIMER3_ENABLED
-#define NRFX_TIMER3_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM1_ENABLED  - Enable TWIM1 instance
-
-
-#ifndef NRFX_TWIM1_ENABLED
-#define NRFX_TWIM1_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enable TWIS0 instance
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS1_ENABLED  - Enable TWIS1 instance
-
-
-#ifndef NRFX_TWIS1_ENABLED
-#define NRFX_TWIS1_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assume that any instance would be initialized only once
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Remove support for synchronous mode
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-// <q> NRFX_TWI1_ENABLED  - Enable TWI1 instance
-
-
-#ifndef NRFX_TWI1_ENABLED
-#define NRFX_TWI1_ENABLED 1
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_USBD_ENABLED - nrfx_usbd - USBD peripheral driver
-//==========================================================
-#ifndef NRFX_USBD_ENABLED
-#define NRFX_USBD_ENABLED 1
-#endif
-// <o> NRFX_USBD_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_USBD_CONFIG_IRQ_PRIORITY
-#define NRFX_USBD_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> USBD_CONFIG_DMASCHEDULER_ISO_BOOST  - Give priority to isochronous transfers
-
-// <i> This option gives priority to isochronous transfers.
-// <i> Enabling it assures that isochronous transfers are always processed,
-// <i> even if multiple other transfers are pending.
-// <i> Isochronous endpoints are prioritized before the usbd_dma_scheduler_algorithm
-// <i> function is called, so the option is independent of the algorithm chosen.
-
-#ifndef NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST
-#define NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST 1
-#endif
-
-// <q> USBD_CONFIG_ISO_IN_ZLP  - Respond to an IN token on ISO IN endpoint with ZLP when no data is ready
-
-
-// <i> If set, ISO IN endpoint will respond to an IN token with ZLP when no data is ready to be sent.
-// <i> Else, there will be no response.
-
-#ifndef NRFX_USBD_CONFIG_ISO_IN_ZLP
-#define NRFX_USBD_CONFIG_ISO_IN_ZLP 0
-#endif
-
-// <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module
-//==========================================================
-#ifndef NRFX_USBD_CONFIG_LOG_ENABLED
-#define NRFX_USBD_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_USBD_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_USBD_CONFIG_LOG_LEVEL
-#define NRFX_USBD_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_USBD_CONFIG_INFO_COLOR
-#define NRFX_USBD_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_USBD_CONFIG_DEBUG_COLOR
-#define NRFX_USBD_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF52832/nrfx_config.h b/modules/nrfx/templates/nRF52832/nrfx_config.h
deleted file mode 100644
index 67f3c74..0000000
--- a/modules/nrfx/templates/nRF52832/nrfx_config.h
+++ /dev/null
@@ -1,2990 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-// <131073=> External Low Swing
-// <196609=> External Full Swing
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// <o> NRFX_COMP_CONFIG_REF  - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// <o> NRFX_COMP_CONFIG_MAIN_MODE  - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_SPEED_MODE  - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// <o> NRFX_COMP_CONFIG_HYST  - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_ISOURCE  - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_COMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver
-//==========================================================
-#ifndef NRFX_I2S_ENABLED
-#define NRFX_I2S_ENABLED 1
-#endif
-// <o> NRFX_I2S_CONFIG_SCK_PIN - SCK pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SCK_PIN
-#define NRFX_I2S_CONFIG_SCK_PIN 31
-#endif
-
-// <o> NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin  <1-31>
-
-
-#ifndef NRFX_I2S_CONFIG_LRCK_PIN
-#define NRFX_I2S_CONFIG_LRCK_PIN 30
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_PIN - MCK pin
-#ifndef NRFX_I2S_CONFIG_MCK_PIN
-#define NRFX_I2S_CONFIG_MCK_PIN 255
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDOUT_PIN
-#define NRFX_I2S_CONFIG_SDOUT_PIN 29
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDIN_PIN
-#define NRFX_I2S_CONFIG_SDIN_PIN 28
-#endif
-
-// <o> NRFX_I2S_CONFIG_MASTER  - Mode
-
-// <0=> Master
-// <1=> Slave
-
-#ifndef NRFX_I2S_CONFIG_MASTER
-#define NRFX_I2S_CONFIG_MASTER 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_FORMAT  - Format
-
-// <0=> I2S
-// <1=> Aligned
-
-#ifndef NRFX_I2S_CONFIG_FORMAT
-#define NRFX_I2S_CONFIG_FORMAT 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_ALIGN  - Alignment
-
-// <0=> Left
-// <1=> Right
-
-#ifndef NRFX_I2S_CONFIG_ALIGN
-#define NRFX_I2S_CONFIG_ALIGN 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_SWIDTH  - Sample width (bits)
-
-// <0=> 8
-// <1=> 16
-// <2=> 24
-
-#ifndef NRFX_I2S_CONFIG_SWIDTH
-#define NRFX_I2S_CONFIG_SWIDTH 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_CHANNELS  - Channels
-
-// <0=> Stereo
-// <1=> Left
-// <2=> Right
-
-#ifndef NRFX_I2S_CONFIG_CHANNELS
-#define NRFX_I2S_CONFIG_CHANNELS 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_SETUP  - MCK behavior
-
-// <0=> Disabled
-// <2147483648=> 32MHz/2
-// <1342177280=> 32MHz/3
-// <1073741824=> 32MHz/4
-// <805306368=> 32MHz/5
-// <671088640=> 32MHz/6
-// <536870912=> 32MHz/8
-// <402653184=> 32MHz/10
-// <369098752=> 32MHz/11
-// <285212672=> 32MHz/15
-// <268435456=> 32MHz/16
-// <201326592=> 32MHz/21
-// <184549376=> 32MHz/23
-// <142606336=> 32MHz/30
-// <138412032=> 32MHz/31
-// <134217728=> 32MHz/32
-// <100663296=> 32MHz/42
-// <68157440=> 32MHz/63
-// <34340864=> 32MHz/125
-
-#ifndef NRFX_I2S_CONFIG_MCK_SETUP
-#define NRFX_I2S_CONFIG_MCK_SETUP 536870912
-#endif
-
-// <o> NRFX_I2S_CONFIG_RATIO  - MCK/LRCK ratio
-
-// <0=> 32x
-// <1=> 48x
-// <2=> 64x
-// <3=> 96x
-// <4=> 128x
-// <5=> 192x
-// <6=> 256x
-// <7=> 384x
-// <8=> 512x
-
-#ifndef NRFX_I2S_CONFIG_RATIO
-#define NRFX_I2S_CONFIG_RATIO 5
-#endif
-
-// <o> NRFX_I2S_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY
-#define NRFX_I2S_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
-#define NRFX_I2S_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_I2S_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
-#define NRFX_I2S_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_I2S_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_INFO_COLOR
-#define NRFX_I2S_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
-#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
-//==========================================================
-#ifndef NRFX_LPCOMP_ENABLED
-#define NRFX_LPCOMP_ENABLED 1
-#endif
-// <o> NRFX_LPCOMP_CONFIG_REFERENCE  - Reference voltage
-
-// <0=> Supply 1/8
-// <1=> Supply 2/8
-// <2=> Supply 3/8
-// <3=> Supply 4/8
-// <4=> Supply 5/8
-// <5=> Supply 6/8
-// <6=> Supply 7/8
-// <8=> Supply 1/16 (nRF52)
-// <9=> Supply 3/16 (nRF52)
-// <10=> Supply 5/16 (nRF52)
-// <11=> Supply 7/16 (nRF52)
-// <12=> Supply 9/16 (nRF52)
-// <13=> Supply 11/16 (nRF52)
-// <14=> Supply 13/16 (nRF52)
-// <15=> Supply 15/16 (nRF52)
-// <7=> External Ref 0
-// <65543=> External Ref 1
-
-#ifndef NRFX_LPCOMP_CONFIG_REFERENCE
-#define NRFX_LPCOMP_CONFIG_REFERENCE 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DETECTION  - Detection
-
-// <0=> Crossing
-// <1=> Up
-// <2=> Down
-
-#ifndef NRFX_LPCOMP_CONFIG_DETECTION
-#define NRFX_LPCOMP_CONFIG_DETECTION 2
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_INPUT
-#define NRFX_LPCOMP_CONFIG_INPUT 0
-#endif
-
-// <q> NRFX_LPCOMP_CONFIG_HYST  - Hysteresis
-
-
-#ifndef NRFX_LPCOMP_CONFIG_HYST
-#define NRFX_LPCOMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY
-#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED
-#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL
-#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR
-#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR
-#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NFCT_ENABLED - nrfx_nfct - NFCT peripheral driver
-//==========================================================
-#ifndef NRFX_NFCT_ENABLED
-#define NRFX_NFCT_ENABLED 1
-#endif
-// <o> NRFX_NFCT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_NFCT_CONFIG_IRQ_PRIORITY
-#define NRFX_NFCT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_NFCT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_NFCT_CONFIG_LOG_ENABLED
-#define NRFX_NFCT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_NFCT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_NFCT_CONFIG_LOG_LEVEL
-#define NRFX_NFCT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_NFCT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_NFCT_CONFIG_INFO_COLOR
-#define NRFX_NFCT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_NFCT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_NFCT_CONFIG_DEBUG_COLOR
-#define NRFX_NFCT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// <o> NRFX_PDM_CONFIG_MODE  - Mode
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// <o> NRFX_PDM_CONFIG_EDGE  - Edge
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_CLOCK_FREQ  - Clock frequency
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PDM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
-
-
-#ifndef NRFX_PRS_BOX_3_ENABLED
-#define NRFX_PRS_BOX_3_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
-
-
-#ifndef NRFX_PRS_BOX_4_ENABLED
-#define NRFX_PRS_BOX_4_ENABLED 1
-#endif
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// <q> NRFX_PWM0_ENABLED  - Enable PWM0 instance
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// <q> NRFX_PWM1_ENABLED  - Enable PWM1 instance
-
-
-#ifndef NRFX_PWM1_ENABLED
-#define NRFX_PWM1_ENABLED 1
-#endif
-
-// <q> NRFX_PWM2_ENABLED  - Enable PWM2 instance
-
-
-#ifndef NRFX_PWM2_ENABLED
-#define NRFX_PWM2_ENABLED 1
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK  - Base clock
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE  - Count mode
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE  - Load mode
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE  - Step mode
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PWM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// <e> NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for PWM.
-
-// <i> The workaround uses interrupts to wake up the CPU and ensure
-// <i> it is active when PWM is about to start a DMA transfer. For
-// <i> initial transfer, done when a playback is started via PPI,
-// <i> a specific EGU instance is used to generate the interrupt.
-// <i> During the playback, the PWM interrupt triggered on SEQEND
-// <i> event of a preceding sequence is used to protect the transfer
-// <i> done for the next sequence to be played.
-//==========================================================
-#ifndef NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
-#define NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
-#endif
-// <o> NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE  - EGU instance used by the nRF52 Anomaly 109 workaround for PWM.
-
-// <0=> EGU0
-// <1=> EGU1
-// <2=> EGU2
-// <3=> EGU3
-// <4=> EGU4
-// <5=> EGU5
-
-#ifndef NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE
-#define NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE 5
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
-
-
-#ifndef NRFX_RTC2_ENABLED
-#define NRFX_RTC2_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// <o> NRFX_SAADC_CONFIG_OVERSAMPLE  - Sample period
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// <q> NRFX_SAADC_CONFIG_LP_MODE  - Enabling low power mode
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SAADC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM1_ENABLED  - Enable SPIM1 instance
-
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM2_ENABLED  - Enable SPIM2 instance
-
-
-#ifndef NRFX_SPIM2_ENABLED
-#define NRFX_SPIM2_ENABLED 1
-#endif
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// <q> NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED  - Enables nRF52 anomaly 109 workaround for SPIM.
-
-
-// <i> The workaround uses interrupts to wake up the CPU by catching
-// <i> a start event of zero-length transmission to start the clock. This
-// <i> ensures that the DMA transfer will be executed without issues and
-// <i> that the proper transfer will be started. See more in the Errata
-// <i> document or Anomaly 109 Addendum located at
-// <i> https://infocenter.nordicsemi.com/
-
-#ifndef NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
-#define NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
-#endif
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS1_ENABLED  - Enable SPIS1 instance
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS2_ENABLED  - Enable SPIS2 instance
-
-
-#ifndef NRFX_SPIS2_ENABLED
-#define NRFX_SPIS2_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// <q> NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED  - Enables nRF52 Anomaly 109 workaround for SPIS.
-
-
-// <i> The workaround uses a GPIOTE channel to generate interrupts
-// <i> on falling edges detected on the CSN line. This will make
-// <i> the CPU active for the moment when SPIS starts DMA transfers,
-// <i> and this way the transfers will be protected.
-// <i> This workaround uses GPIOTE driver, so this driver must be
-// <i> enabled as well.
-
-#ifndef NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED
-#define NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
-#endif
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// <q> NRFX_SPI1_ENABLED  - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-// <q> NRFX_SPI2_ENABLED  - Enable SPI2 instance
-
-
-#ifndef NRFX_SPI2_ENABLED
-#define NRFX_SPI2_ENABLED 1
-#endif
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER3_ENABLED  - Enable TIMER3 instance
-
-
-#ifndef NRFX_TIMER3_ENABLED
-#define NRFX_TIMER3_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER4_ENABLED  - Enable TIMER4 instance
-
-
-#ifndef NRFX_TIMER4_ENABLED
-#define NRFX_TIMER4_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM1_ENABLED  - Enable TWIM1 instance
-
-
-#ifndef NRFX_TWIM1_ENABLED
-#define NRFX_TWIM1_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// <q> NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED  - Enables nRF52 anomaly 109 workaround for TWIM.
-
-
-// <i> The workaround uses interrupts to wake up the CPU by catching
-// <i> the start event of zero-frequency transmission, clear the
-// <i> peripheral, set desired frequency, start the peripheral, and
-// <i> the proper transmission. See more in the Errata document or
-// <i> Anomaly 109 Addendum located at https://infocenter.nordicsemi.com/
-
-#ifndef NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
-#define NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
-#endif
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enable TWIS0 instance
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS1_ENABLED  - Enable TWIS1 instance
-
-
-#ifndef NRFX_TWIS1_ENABLED
-#define NRFX_TWIS1_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assume that any instance would be initialized only once
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Remove support for synchronous mode
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-// <q> NRFX_TWI1_ENABLED  - Enable TWI1 instance
-
-
-#ifndef NRFX_TWI1_ENABLED
-#define NRFX_TWI1_ENABLED 1
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF52833/nrfx_config.h b/modules/nrfx/templates/nRF52833/nrfx_config.h
deleted file mode 100644
index a1032d7..0000000
--- a/modules/nrfx/templates/nRF52833/nrfx_config.h
+++ /dev/null
@@ -1,3042 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-// <131073=> External Low Swing
-// <196609=> External Full Swing
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// <o> NRFX_COMP_CONFIG_REF  - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// <o> NRFX_COMP_CONFIG_MAIN_MODE  - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_SPEED_MODE  - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// <o> NRFX_COMP_CONFIG_HYST  - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_ISOURCE  - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_COMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver
-//==========================================================
-#ifndef NRFX_I2S_ENABLED
-#define NRFX_I2S_ENABLED 1
-#endif
-// <o> NRFX_I2S_CONFIG_SCK_PIN - SCK pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SCK_PIN
-#define NRFX_I2S_CONFIG_SCK_PIN 31
-#endif
-
-// <o> NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin  <1-31>
-
-
-#ifndef NRFX_I2S_CONFIG_LRCK_PIN
-#define NRFX_I2S_CONFIG_LRCK_PIN 30
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_PIN - MCK pin
-#ifndef NRFX_I2S_CONFIG_MCK_PIN
-#define NRFX_I2S_CONFIG_MCK_PIN 255
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDOUT_PIN
-#define NRFX_I2S_CONFIG_SDOUT_PIN 29
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDIN_PIN
-#define NRFX_I2S_CONFIG_SDIN_PIN 28
-#endif
-
-// <o> NRFX_I2S_CONFIG_MASTER  - Mode
-
-// <0=> Master
-// <1=> Slave
-
-#ifndef NRFX_I2S_CONFIG_MASTER
-#define NRFX_I2S_CONFIG_MASTER 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_FORMAT  - Format
-
-// <0=> I2S
-// <1=> Aligned
-
-#ifndef NRFX_I2S_CONFIG_FORMAT
-#define NRFX_I2S_CONFIG_FORMAT 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_ALIGN  - Alignment
-
-// <0=> Left
-// <1=> Right
-
-#ifndef NRFX_I2S_CONFIG_ALIGN
-#define NRFX_I2S_CONFIG_ALIGN 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_SWIDTH  - Sample width (bits)
-
-// <0=> 8
-// <1=> 16
-// <2=> 24
-
-#ifndef NRFX_I2S_CONFIG_SWIDTH
-#define NRFX_I2S_CONFIG_SWIDTH 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_CHANNELS  - Channels
-
-// <0=> Stereo
-// <1=> Left
-// <2=> Right
-
-#ifndef NRFX_I2S_CONFIG_CHANNELS
-#define NRFX_I2S_CONFIG_CHANNELS 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_SETUP  - MCK behavior
-
-// <0=> Disabled
-// <2147483648=> 32MHz/2
-// <1342177280=> 32MHz/3
-// <1073741824=> 32MHz/4
-// <805306368=> 32MHz/5
-// <671088640=> 32MHz/6
-// <536870912=> 32MHz/8
-// <402653184=> 32MHz/10
-// <369098752=> 32MHz/11
-// <285212672=> 32MHz/15
-// <268435456=> 32MHz/16
-// <201326592=> 32MHz/21
-// <184549376=> 32MHz/23
-// <142606336=> 32MHz/30
-// <138412032=> 32MHz/31
-// <134217728=> 32MHz/32
-// <100663296=> 32MHz/42
-// <68157440=> 32MHz/63
-// <34340864=> 32MHz/125
-
-#ifndef NRFX_I2S_CONFIG_MCK_SETUP
-#define NRFX_I2S_CONFIG_MCK_SETUP 536870912
-#endif
-
-// <o> NRFX_I2S_CONFIG_RATIO  - MCK/LRCK ratio
-
-// <0=> 32x
-// <1=> 48x
-// <2=> 64x
-// <3=> 96x
-// <4=> 128x
-// <5=> 192x
-// <6=> 256x
-// <7=> 384x
-// <8=> 512x
-
-#ifndef NRFX_I2S_CONFIG_RATIO
-#define NRFX_I2S_CONFIG_RATIO 5
-#endif
-
-// <o> NRFX_I2S_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY
-#define NRFX_I2S_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
-#define NRFX_I2S_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_I2S_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
-#define NRFX_I2S_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_I2S_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_INFO_COLOR
-#define NRFX_I2S_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
-#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
-//==========================================================
-#ifndef NRFX_LPCOMP_ENABLED
-#define NRFX_LPCOMP_ENABLED 1
-#endif
-// <o> NRFX_LPCOMP_CONFIG_REFERENCE  - Reference voltage
-
-// <0=> Supply 1/8
-// <1=> Supply 2/8
-// <2=> Supply 3/8
-// <3=> Supply 4/8
-// <4=> Supply 5/8
-// <5=> Supply 6/8
-// <6=> Supply 7/8
-// <8=> Supply 1/16 (nRF52)
-// <9=> Supply 3/16 (nRF52)
-// <10=> Supply 5/16 (nRF52)
-// <11=> Supply 7/16 (nRF52)
-// <12=> Supply 9/16 (nRF52)
-// <13=> Supply 11/16 (nRF52)
-// <14=> Supply 13/16 (nRF52)
-// <15=> Supply 15/16 (nRF52)
-// <7=> External Ref 0
-// <65543=> External Ref 1
-
-#ifndef NRFX_LPCOMP_CONFIG_REFERENCE
-#define NRFX_LPCOMP_CONFIG_REFERENCE 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DETECTION  - Detection
-
-// <0=> Crossing
-// <1=> Up
-// <2=> Down
-
-#ifndef NRFX_LPCOMP_CONFIG_DETECTION
-#define NRFX_LPCOMP_CONFIG_DETECTION 2
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_INPUT
-#define NRFX_LPCOMP_CONFIG_INPUT 0
-#endif
-
-// <q> NRFX_LPCOMP_CONFIG_HYST  - Hysteresis
-
-
-#ifndef NRFX_LPCOMP_CONFIG_HYST
-#define NRFX_LPCOMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY
-#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED
-#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL
-#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR
-#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR
-#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NFCT_ENABLED - nrfx_nfct - NFCT peripheral driver
-//==========================================================
-#ifndef NRFX_NFCT_ENABLED
-#define NRFX_NFCT_ENABLED 1
-#endif
-// <o> NRFX_NFCT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_NFCT_CONFIG_IRQ_PRIORITY
-#define NRFX_NFCT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_NFCT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_NFCT_CONFIG_LOG_ENABLED
-#define NRFX_NFCT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_NFCT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_NFCT_CONFIG_LOG_LEVEL
-#define NRFX_NFCT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_NFCT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_NFCT_CONFIG_INFO_COLOR
-#define NRFX_NFCT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_NFCT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_NFCT_CONFIG_DEBUG_COLOR
-#define NRFX_NFCT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// <o> NRFX_PDM_CONFIG_MODE  - Mode
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// <o> NRFX_PDM_CONFIG_EDGE  - Edge
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_CLOCK_FREQ  - Clock frequency
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PDM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
-
-
-#ifndef NRFX_PRS_BOX_3_ENABLED
-#define NRFX_PRS_BOX_3_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
-
-
-#ifndef NRFX_PRS_BOX_4_ENABLED
-#define NRFX_PRS_BOX_4_ENABLED 1
-#endif
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// <q> NRFX_PWM0_ENABLED  - Enable PWM0 instance
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// <q> NRFX_PWM1_ENABLED  - Enable PWM1 instance
-
-
-#ifndef NRFX_PWM1_ENABLED
-#define NRFX_PWM1_ENABLED 1
-#endif
-
-// <q> NRFX_PWM2_ENABLED  - Enable PWM2 instance
-
-
-#ifndef NRFX_PWM2_ENABLED
-#define NRFX_PWM2_ENABLED 1
-#endif
-
-// <q> NRFX_PWM3_ENABLED  - Enable PWM3 instance
-
-
-#ifndef NRFX_PWM3_ENABLED
-#define NRFX_PWM3_ENABLED 1
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK  - Base clock
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE  - Count mode
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE  - Load mode
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE  - Step mode
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PWM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
-
-
-#ifndef NRFX_RTC2_ENABLED
-#define NRFX_RTC2_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// <o> NRFX_SAADC_CONFIG_OVERSAMPLE  - Sample period
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// <q> NRFX_SAADC_CONFIG_LP_MODE  - Enabling low power mode
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SAADC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM1_ENABLED  - Enable SPIM1 instance
-
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM2_ENABLED  - Enable SPIM2 instance
-
-
-#ifndef NRFX_SPIM2_ENABLED
-#define NRFX_SPIM2_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM3_ENABLED  - Enable SPIM3 instance
-
-
-#ifndef NRFX_SPIM3_ENABLED
-#define NRFX_SPIM3_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM_EXTENDED_ENABLED  - Enable extended SPIM features
-
-
-#ifndef NRFX_SPIM_EXTENDED_ENABLED
-#define NRFX_SPIM_EXTENDED_ENABLED 0
-#endif
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS1_ENABLED  - Enable SPIS1 instance
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS2_ENABLED  - Enable SPIS2 instance
-
-
-#ifndef NRFX_SPIS2_ENABLED
-#define NRFX_SPIS2_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// <q> NRFX_SPI1_ENABLED  - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-// <q> NRFX_SPI2_ENABLED  - Enable SPI2 instance
-
-
-#ifndef NRFX_SPI2_ENABLED
-#define NRFX_SPI2_ENABLED 1
-#endif
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER3_ENABLED  - Enable TIMER3 instance
-
-
-#ifndef NRFX_TIMER3_ENABLED
-#define NRFX_TIMER3_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER4_ENABLED  - Enable TIMER4 instance
-
-
-#ifndef NRFX_TIMER4_ENABLED
-#define NRFX_TIMER4_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM1_ENABLED  - Enable TWIM1 instance
-
-
-#ifndef NRFX_TWIM1_ENABLED
-#define NRFX_TWIM1_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enable TWIS0 instance
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS1_ENABLED  - Enable TWIS1 instance
-
-
-#ifndef NRFX_TWIS1_ENABLED
-#define NRFX_TWIS1_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assume that any instance would be initialized only once
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Remove support for synchronous mode
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-// <q> NRFX_TWI1_ENABLED  - Enable TWI1 instance
-
-
-#ifndef NRFX_TWI1_ENABLED
-#define NRFX_TWI1_ENABLED 1
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <q> NRFX_UARTE1_ENABLED - Enable UARTE1 instance
-#ifndef NRFX_UARTE1_ENABLED
-#define NRFX_UARTE1_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_USBD_ENABLED - nrfx_usbd - USBD peripheral driver
-//==========================================================
-#ifndef NRFX_USBD_ENABLED
-#define NRFX_USBD_ENABLED 1
-#endif
-// <o> NRFX_USBD_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_USBD_CONFIG_IRQ_PRIORITY
-#define NRFX_USBD_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> USBD_CONFIG_DMASCHEDULER_ISO_BOOST  - Give priority to isochronous transfers
-
-// <i> This option gives priority to isochronous transfers.
-// <i> Enabling it assures that isochronous transfers are always processed,
-// <i> even if multiple other transfers are pending.
-// <i> Isochronous endpoints are prioritized before the usbd_dma_scheduler_algorithm
-// <i> function is called, so the option is independent of the algorithm chosen.
-
-#ifndef NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST
-#define NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST 1
-#endif
-
-// <q> USBD_CONFIG_ISO_IN_ZLP  - Respond to an IN token on ISO IN endpoint with ZLP when no data is ready
-
-
-// <i> If set, ISO IN endpoint will respond to an IN token with ZLP when no data is ready to be sent.
-// <i> Else, there will be no response.
-
-#ifndef NRFX_USBD_CONFIG_ISO_IN_ZLP
-#define NRFX_USBD_CONFIG_ISO_IN_ZLP 0
-#endif
-
-// <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module
-//==========================================================
-#ifndef NRFX_USBD_CONFIG_LOG_ENABLED
-#define NRFX_USBD_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_USBD_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_USBD_CONFIG_LOG_LEVEL
-#define NRFX_USBD_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_USBD_CONFIG_INFO_COLOR
-#define NRFX_USBD_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_USBD_CONFIG_DEBUG_COLOR
-#define NRFX_USBD_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF52840/nrfx_config.h b/modules/nrfx/templates/nRF52840/nrfx_config.h
deleted file mode 100644
index ba7b315..0000000
--- a/modules/nrfx/templates/nRF52840/nrfx_config.h
+++ /dev/null
@@ -1,3180 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
-
-// <0=> RC
-// <1=> XTAL
-// <2=> Synth
-// <131073=> External Low Swing
-// <196609=> External Full Swing
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 1
-#endif
-
-// <q> NRFX_CLOCK_CONFIG_LF_CAL_ENABLED  - Enables LF Clock Calibration Support
-
-#ifndef NRFX_CLOCK_CONFIG_LF_CAL_ENABLED
-#define NRFX_CLOCK_CONFIG_LF_CAL_ENABLED 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
-//==========================================================
-#ifndef NRFX_COMP_ENABLED
-#define NRFX_COMP_ENABLED 1
-#endif
-// <o> NRFX_COMP_CONFIG_REF  - Reference voltage
-
-// <0=> Internal 1.2V
-// <1=> Internal 1.8V
-// <2=> Internal 2.4V
-// <4=> VDD
-// <7=> ARef
-
-#ifndef NRFX_COMP_CONFIG_REF
-#define NRFX_COMP_CONFIG_REF 1
-#endif
-
-// <o> NRFX_COMP_CONFIG_MAIN_MODE  - Main mode
-
-// <0=> Single ended
-// <1=> Differential
-
-#ifndef NRFX_COMP_CONFIG_MAIN_MODE
-#define NRFX_COMP_CONFIG_MAIN_MODE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_SPEED_MODE  - Speed mode
-
-// <0=> Low power
-// <1=> Normal
-// <2=> High speed
-
-#ifndef NRFX_COMP_CONFIG_SPEED_MODE
-#define NRFX_COMP_CONFIG_SPEED_MODE 2
-#endif
-
-// <o> NRFX_COMP_CONFIG_HYST  - Hystheresis
-
-// <0=> No
-// <1=> 50mV
-
-#ifndef NRFX_COMP_CONFIG_HYST
-#define NRFX_COMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_ISOURCE  - Current Source
-
-// <0=> Off
-// <1=> 2.5 uA
-// <2=> 5 uA
-// <3=> 10 uA
-
-#ifndef NRFX_COMP_CONFIG_ISOURCE
-#define NRFX_COMP_CONFIG_ISOURCE 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_INPUT
-#define NRFX_COMP_CONFIG_INPUT 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
-#define NRFX_COMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
-#define NRFX_COMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_COMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
-#define NRFX_COMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_COMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_INFO_COLOR
-#define NRFX_COMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_COMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
-#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver
-//==========================================================
-#ifndef NRFX_I2S_ENABLED
-#define NRFX_I2S_ENABLED 1
-#endif
-// <o> NRFX_I2S_CONFIG_SCK_PIN - SCK pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SCK_PIN
-#define NRFX_I2S_CONFIG_SCK_PIN 31
-#endif
-
-// <o> NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin  <1-31>
-
-
-#ifndef NRFX_I2S_CONFIG_LRCK_PIN
-#define NRFX_I2S_CONFIG_LRCK_PIN 30
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_PIN - MCK pin
-#ifndef NRFX_I2S_CONFIG_MCK_PIN
-#define NRFX_I2S_CONFIG_MCK_PIN 255
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDOUT_PIN
-#define NRFX_I2S_CONFIG_SDOUT_PIN 29
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDIN_PIN
-#define NRFX_I2S_CONFIG_SDIN_PIN 28
-#endif
-
-// <o> NRFX_I2S_CONFIG_MASTER  - Mode
-
-// <0=> Master
-// <1=> Slave
-
-#ifndef NRFX_I2S_CONFIG_MASTER
-#define NRFX_I2S_CONFIG_MASTER 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_FORMAT  - Format
-
-// <0=> I2S
-// <1=> Aligned
-
-#ifndef NRFX_I2S_CONFIG_FORMAT
-#define NRFX_I2S_CONFIG_FORMAT 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_ALIGN  - Alignment
-
-// <0=> Left
-// <1=> Right
-
-#ifndef NRFX_I2S_CONFIG_ALIGN
-#define NRFX_I2S_CONFIG_ALIGN 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_SWIDTH  - Sample width (bits)
-
-// <0=> 8
-// <1=> 16
-// <2=> 24
-
-#ifndef NRFX_I2S_CONFIG_SWIDTH
-#define NRFX_I2S_CONFIG_SWIDTH 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_CHANNELS  - Channels
-
-// <0=> Stereo
-// <1=> Left
-// <2=> Right
-
-#ifndef NRFX_I2S_CONFIG_CHANNELS
-#define NRFX_I2S_CONFIG_CHANNELS 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_SETUP  - MCK behavior
-
-// <0=> Disabled
-// <2147483648=> 32MHz/2
-// <1342177280=> 32MHz/3
-// <1073741824=> 32MHz/4
-// <805306368=> 32MHz/5
-// <671088640=> 32MHz/6
-// <536870912=> 32MHz/8
-// <402653184=> 32MHz/10
-// <369098752=> 32MHz/11
-// <285212672=> 32MHz/15
-// <268435456=> 32MHz/16
-// <201326592=> 32MHz/21
-// <184549376=> 32MHz/23
-// <142606336=> 32MHz/30
-// <138412032=> 32MHz/31
-// <134217728=> 32MHz/32
-// <100663296=> 32MHz/42
-// <68157440=> 32MHz/63
-// <34340864=> 32MHz/125
-
-#ifndef NRFX_I2S_CONFIG_MCK_SETUP
-#define NRFX_I2S_CONFIG_MCK_SETUP 536870912
-#endif
-
-// <o> NRFX_I2S_CONFIG_RATIO  - MCK/LRCK ratio
-
-// <0=> 32x
-// <1=> 48x
-// <2=> 64x
-// <3=> 96x
-// <4=> 128x
-// <5=> 192x
-// <6=> 256x
-// <7=> 384x
-// <8=> 512x
-
-#ifndef NRFX_I2S_CONFIG_RATIO
-#define NRFX_I2S_CONFIG_RATIO 5
-#endif
-
-// <o> NRFX_I2S_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY
-#define NRFX_I2S_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
-#define NRFX_I2S_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_I2S_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
-#define NRFX_I2S_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_I2S_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_INFO_COLOR
-#define NRFX_I2S_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
-#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
-//==========================================================
-#ifndef NRFX_LPCOMP_ENABLED
-#define NRFX_LPCOMP_ENABLED 1
-#endif
-// <o> NRFX_LPCOMP_CONFIG_REFERENCE  - Reference voltage
-
-// <0=> Supply 1/8
-// <1=> Supply 2/8
-// <2=> Supply 3/8
-// <3=> Supply 4/8
-// <4=> Supply 5/8
-// <5=> Supply 6/8
-// <6=> Supply 7/8
-// <8=> Supply 1/16 (nRF52)
-// <9=> Supply 3/16 (nRF52)
-// <10=> Supply 5/16 (nRF52)
-// <11=> Supply 7/16 (nRF52)
-// <12=> Supply 9/16 (nRF52)
-// <13=> Supply 11/16 (nRF52)
-// <14=> Supply 13/16 (nRF52)
-// <15=> Supply 15/16 (nRF52)
-// <7=> External Ref 0
-// <65543=> External Ref 1
-
-#ifndef NRFX_LPCOMP_CONFIG_REFERENCE
-#define NRFX_LPCOMP_CONFIG_REFERENCE 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DETECTION  - Detection
-
-// <0=> Crossing
-// <1=> Up
-// <2=> Down
-
-#ifndef NRFX_LPCOMP_CONFIG_DETECTION
-#define NRFX_LPCOMP_CONFIG_DETECTION 2
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INPUT  - Analog input
-
-// <0=> 0
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_INPUT
-#define NRFX_LPCOMP_CONFIG_INPUT 0
-#endif
-
-// <q> NRFX_LPCOMP_CONFIG_HYST  - Hysteresis
-
-
-#ifndef NRFX_LPCOMP_CONFIG_HYST
-#define NRFX_LPCOMP_CONFIG_HYST 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY
-#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED
-#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL
-#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR
-#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR
-#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NFCT_ENABLED - nrfx_nfct - NFCT peripheral driver
-//==========================================================
-#ifndef NRFX_NFCT_ENABLED
-#define NRFX_NFCT_ENABLED 1
-#endif
-// <o> NRFX_NFCT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_NFCT_CONFIG_IRQ_PRIORITY
-#define NRFX_NFCT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_NFCT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_NFCT_CONFIG_LOG_ENABLED
-#define NRFX_NFCT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_NFCT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_NFCT_CONFIG_LOG_LEVEL
-#define NRFX_NFCT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_NFCT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_NFCT_CONFIG_INFO_COLOR
-#define NRFX_NFCT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_NFCT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_NFCT_CONFIG_DEBUG_COLOR
-#define NRFX_NFCT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// <o> NRFX_PDM_CONFIG_MODE  - Mode
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// <o> NRFX_PDM_CONFIG_EDGE  - Edge
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_CLOCK_FREQ  - Clock frequency
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PDM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of main DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV  - The default configuration of High Voltage DCDC regulator
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
-#endif
-
-// </e>
-
-// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
-//==========================================================
-#ifndef NRFX_PPI_ENABLED
-#define NRFX_PPI_ENABLED 1
-#endif
-// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
-#define NRFX_PPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
-#define NRFX_PPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_INFO_COLOR
-#define NRFX_PPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
-#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
-
-
-#ifndef NRFX_PRS_BOX_3_ENABLED
-#define NRFX_PRS_BOX_3_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_4_ENABLED  - Enables box 4 in the module.
-
-
-#ifndef NRFX_PRS_BOX_4_ENABLED
-#define NRFX_PRS_BOX_4_ENABLED 1
-#endif
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// <q> NRFX_PWM0_ENABLED  - Enable PWM0 instance
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// <q> NRFX_PWM1_ENABLED  - Enable PWM1 instance
-
-
-#ifndef NRFX_PWM1_ENABLED
-#define NRFX_PWM1_ENABLED 1
-#endif
-
-// <q> NRFX_PWM2_ENABLED  - Enable PWM2 instance
-
-
-#ifndef NRFX_PWM2_ENABLED
-#define NRFX_PWM2_ENABLED 1
-#endif
-
-// <q> NRFX_PWM3_ENABLED  - Enable PWM3 instance
-
-
-#ifndef NRFX_PWM3_ENABLED
-#define NRFX_PWM3_ENABLED 1
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin  <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK  - Base clock
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE  - Count mode
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE  - Load mode
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE  - Step mode
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PWM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
-//==========================================================
-#ifndef NRFX_QDEC_ENABLED
-#define NRFX_QDEC_ENABLED 1
-#endif
-// <o> NRFX_QDEC_CONFIG_REPORTPER  - Report period
-
-// <0=> 10 Samples
-// <1=> 40 Samples
-// <2=> 80 Samples
-// <3=> 120 Samples
-// <4=> 160 Samples
-// <5=> 200 Samples
-// <6=> 240 Samples
-// <7=> 280 Samples
-
-#ifndef NRFX_QDEC_CONFIG_REPORTPER
-#define NRFX_QDEC_CONFIG_REPORTPER 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_SAMPLEPER  - Sample period
-
-// <0=> 128 us
-// <1=> 256 us
-// <2=> 512 us
-// <3=> 1024 us
-// <4=> 2048 us
-// <5=> 4096 us
-// <6=> 8192 us
-// <7=> 16384 us
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
-#define NRFX_QDEC_CONFIG_SAMPLEPER 7
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_A - A pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_A
-#define NRFX_QDEC_CONFIG_PIO_A 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_B - B pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_B
-#define NRFX_QDEC_CONFIG_PIO_B 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin  <0-31>
-
-
-#ifndef NRFX_QDEC_CONFIG_PIO_LED
-#define NRFX_QDEC_CONFIG_PIO_LED 31
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
-#ifndef NRFX_QDEC_CONFIG_LEDPRE
-#define NRFX_QDEC_CONFIG_LEDPRE 511
-#endif
-
-// <o> NRFX_QDEC_CONFIG_LEDPOL  - LED polarity
-
-// <0=> Active low
-// <1=> Active high
-
-#ifndef NRFX_QDEC_CONFIG_LEDPOL
-#define NRFX_QDEC_CONFIG_LEDPOL 1
-#endif
-
-// <q> NRFX_QDEC_CONFIG_DBFEN  - Debouncing enable
-
-
-#ifndef NRFX_QDEC_CONFIG_DBFEN
-#define NRFX_QDEC_CONFIG_DBFEN 0
-#endif
-
-// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN  - Sample ready interrupt enable
-
-
-#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
-#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
-#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
-#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_QDEC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
-#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_QDEC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
-#define NRFX_QDEC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
-#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_QSPI_ENABLED - nrfx_qspi - QSPI peripheral driver
-//==========================================================
-#ifndef NRFX_QSPI_ENABLED
-#define NRFX_QSPI_ENABLED 1
-#endif
-// <o> NRFX_QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns).  <0-255>
-
-
-#ifndef NRFX_QSPI_CONFIG_SCK_DELAY
-#define NRFX_QSPI_CONFIG_SCK_DELAY 1
-#endif
-
-// <o> NRFX_QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation.
-#ifndef NRFX_QSPI_CONFIG_XIP_OFFSET
-#define NRFX_QSPI_CONFIG_XIP_OFFSET 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_READOC  - Number of data lines and opcode used for reading.
-
-// <0=> FastRead
-// <1=> Read2O
-// <2=> Read2IO
-// <3=> Read4O
-// <4=> Read4IO
-
-#ifndef NRFX_QSPI_CONFIG_READOC
-#define NRFX_QSPI_CONFIG_READOC 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_WRITEOC  - Number of data lines and opcode used for writing.
-
-// <0=> PP
-// <1=> PP2O
-// <2=> PP4O
-// <3=> PP4IO
-
-#ifndef NRFX_QSPI_CONFIG_WRITEOC
-#define NRFX_QSPI_CONFIG_WRITEOC 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_ADDRMODE  - Addressing mode.
-
-// <0=> 24bit
-// <1=> 32bit
-
-#ifndef NRFX_QSPI_CONFIG_ADDRMODE
-#define NRFX_QSPI_CONFIG_ADDRMODE 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_MODE  - SPI mode.
-
-// <0=> Mode 0
-// <1=> Mode 1
-
-#ifndef NRFX_QSPI_CONFIG_MODE
-#define NRFX_QSPI_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_QSPI_CONFIG_FREQUENCY  - Frequency divider.
-
-// <0=> 32MHz/1
-// <1=> 32MHz/2
-// <2=> 32MHz/3
-// <3=> 32MHz/4
-// <4=> 32MHz/5
-// <5=> 32MHz/6
-// <6=> 32MHz/7
-// <7=> 32MHz/8
-// <8=> 32MHz/9
-// <9=> 32MHz/10
-// <10=> 32MHz/11
-// <11=> 32MHz/12
-// <12=> 32MHz/13
-// <13=> 32MHz/14
-// <14=> 32MHz/15
-// <15=> 32MHz/16
-
-#ifndef NRFX_QSPI_CONFIG_FREQUENCY
-#define NRFX_QSPI_CONFIG_FREQUENCY 15
-#endif
-
-// <s> NRFX_QSPI_PIN_SCK - SCK pin value.
-#ifndef NRFX_QSPI_PIN_SCK
-#define NRFX_QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_CSN - CSN pin value.
-#ifndef NRFX_QSPI_PIN_CSN
-#define NRFX_QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO0 - IO0 pin value.
-#ifndef NRFX_QSPI_PIN_IO0
-#define NRFX_QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO1 - IO1 pin value.
-#ifndef NRFX_QSPI_PIN_IO1
-#define NRFX_QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO2 - IO2 pin value.
-#ifndef NRFX_QSPI_PIN_IO2
-#define NRFX_QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <s> NRFX_QSPI_PIN_IO3 - IO3 pin value.
-#ifndef NRFX_QSPI_PIN_IO3
-#define NRFX_QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED
-#endif
-
-// <o> NRFX_QSPI_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_QSPI_CONFIG_IRQ_PRIORITY
-#define NRFX_QSPI_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
-//==========================================================
-#ifndef NRFX_RNG_ENABLED
-#define NRFX_RNG_ENABLED 1
-#endif
-// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION  - Error correction
-
-
-#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
-#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
-#endif
-
-// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
-#define NRFX_RNG_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
-#define NRFX_RNG_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RNG_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
-#define NRFX_RNG_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RNG_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_INFO_COLOR
-#define NRFX_RNG_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RNG_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
-#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enable RTC0 instance
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enable RTC1 instance
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <q> NRFX_RTC2_ENABLED  - Enable RTC2 instance
-
-
-#ifndef NRFX_RTC2_ENABLED
-#define NRFX_RTC2_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency  <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// <o> NRFX_SAADC_CONFIG_OVERSAMPLE  - Sample period
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// <q> NRFX_SAADC_CONFIG_LP_MODE  - Enabling low power mode
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SAADC_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enable SPIM0 instance
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM1_ENABLED  - Enable SPIM1 instance
-
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM2_ENABLED  - Enable SPIM2 instance
-
-
-#ifndef NRFX_SPIM2_ENABLED
-#define NRFX_SPIM2_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM3_ENABLED  - Enable SPIM3 instance
-
-
-#ifndef NRFX_SPIM3_ENABLED
-#define NRFX_SPIM3_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM_EXTENDED_ENABLED  - Enable extended SPIM features
-
-
-#ifndef NRFX_SPIM_EXTENDED_ENABLED
-#define NRFX_SPIM_EXTENDED_ENABLED 0
-#endif
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// <q> NRFX_SPIM3_NRF52840_ANOMALY_198_WORKAROUND_ENABLED  - Enables nRF52840 anomaly 198 workaround for SPIM3.
-
-
-// <i> See more in the Errata document located at
-// <i> https://infocenter.nordicsemi.com/
-
-#ifndef NRFX_SPIM3_NRF52840_ANOMALY_198_WORKAROUND_ENABLED
-#define NRFX_SPIM3_NRF52840_ANOMALY_198_WORKAROUND_ENABLED 0
-#endif
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enable SPIS0 instance
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS1_ENABLED  - Enable SPIS1 instance
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS2_ENABLED  - Enable SPIS2 instance
-
-
-#ifndef NRFX_SPIS2_ENABLED
-#define NRFX_SPIS2_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character  <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
-//==========================================================
-#ifndef NRFX_SPI_ENABLED
-#define NRFX_SPI_ENABLED 1
-#endif
-// <q> NRFX_SPI0_ENABLED  - Enable SPI0 instance
-
-
-#ifndef NRFX_SPI0_ENABLED
-#define NRFX_SPI0_ENABLED 1
-#endif
-
-// <q> NRFX_SPI1_ENABLED  - Enable SPI1 instance
-
-
-#ifndef NRFX_SPI1_ENABLED
-#define NRFX_SPI1_ENABLED 1
-#endif
-
-// <q> NRFX_SPI2_ENABLED  - Enable SPI2 instance
-
-
-#ifndef NRFX_SPI2_ENABLED
-#define NRFX_SPI2_ENABLED 1
-#endif
-
-// <o> NRFX_SPI_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPI_MISO_PULL_CFG
-#define NRFX_SPI_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
-#define NRFX_SPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
-#define NRFX_SPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_INFO_COLOR
-#define NRFX_SPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
-#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enable EGU support
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Exclude SWI0 from being utilized by the driver
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Exclude SWI1 from being utilized by the driver
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Exclude SWI2 from being utilized by the driver
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Exclude SWI3 from being utilized by the driver
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Exclude SWI4 from being utilized by the driver
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Exclude SWI5 from being utilized by the driver
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TEMP_ENABLED - nrfx_temp - TEMP peripheral driver
-//==========================================================
-#ifndef NRFX_TEMP_ENABLED
-#define NRFX_TEMP_ENABLED 1
-#endif
-
-// <o> NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// </e>
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enable TIMER0 instance
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enable TIMER1 instance
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enable TIMER2 instance
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER3_ENABLED  - Enable TIMER3 instance
-
-
-#ifndef NRFX_TIMER3_ENABLED
-#define NRFX_TIMER3_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER4_ENABLED  - Enable TIMER4 instance
-
-
-#ifndef NRFX_TIMER4_ENABLED
-#define NRFX_TIMER4_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enable TWIM0 instance
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM1_ENABLED  - Enable TWIM1 instance
-
-
-#ifndef NRFX_TWIM1_ENABLED
-#define NRFX_TWIM1_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enable TWIS0 instance
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS1_ENABLED  - Enable TWIS1 instance
-
-
-#ifndef NRFX_TWIS1_ENABLED
-#define NRFX_TWIS1_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assume that any instance would be initialized only once
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Remove support for synchronous mode
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
-//==========================================================
-#ifndef NRFX_TWI_ENABLED
-#define NRFX_TWI_ENABLED 1
-#endif
-// <q> NRFX_TWI0_ENABLED  - Enable TWI0 instance
-
-
-#ifndef NRFX_TWI0_ENABLED
-#define NRFX_TWI0_ENABLED 1
-#endif
-
-// <q> NRFX_TWI1_ENABLED  - Enable TWI1 instance
-
-
-#ifndef NRFX_TWI1_ENABLED
-#define NRFX_TWI1_ENABLED 1
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY  - Frequency
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit
-
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
-#define NRFX_TWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWI_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
-#define NRFX_TWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_INFO_COLOR
-#define NRFX_TWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
-#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <q> NRFX_UARTE1_ENABLED - Enable UARTE1 instance
-#ifndef NRFX_UARTE1_ENABLED
-#define NRFX_UARTE1_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
-//==========================================================
-#ifndef NRFX_UART_ENABLED
-#define NRFX_UART_ENABLED 1
-#endif
-// <q> NRFX_UART0_ENABLED - Enable UART0 instance
-#ifndef NRFX_UART0_ENABLED
-#define NRFX_UART0_ENABLED 1
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_HWFC  - Hardware Flow Control
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
-#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_PARITY  - Parity
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
-#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE  - Default Baudrate
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3866624=> 14400 baud
-// <5152768=> 19200 baud
-// <7729152=> 28800 baud
-// <8388608=> 31250 baud
-// <10309632=> 38400 baud
-// <15007744=> 56000 baud
-// <15462400=> 57600 baud
-// <20615168=> 76800 baud
-// <30924800=> 115200 baud
-// <61845504=> 230400 baud
-// <67108864=> 250000 baud
-// <123695104=> 460800 baud
-// <247386112=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
-#endif
-
-// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UART_CONFIG_LOG_ENABLED
-#define NRFX_UART_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UART_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UART_CONFIG_LOG_LEVEL
-#define NRFX_UART_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UART_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_INFO_COLOR
-#define NRFX_UART_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UART_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
-#define NRFX_UART_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_USBD_ENABLED - nrfx_usbd - USBD peripheral driver
-//==========================================================
-#ifndef NRFX_USBD_ENABLED
-#define NRFX_USBD_ENABLED 1
-#endif
-// <o> NRFX_USBD_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_USBD_CONFIG_IRQ_PRIORITY
-#define NRFX_USBD_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> USBD_CONFIG_DMASCHEDULER_ISO_BOOST  - Give priority to isochronous transfers
-
-// <i> This option gives priority to isochronous transfers.
-// <i> Enabling it assures that isochronous transfers are always processed,
-// <i> even if multiple other transfers are pending.
-// <i> Isochronous endpoints are prioritized before the usbd_dma_scheduler_algorithm
-// <i> function is called, so the option is independent of the algorithm chosen.
-
-#ifndef NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST
-#define NRFX_USBD_CONFIG_DMASCHEDULER_ISO_BOOST 1
-#endif
-
-// <q> USBD_CONFIG_ISO_IN_ZLP  - Respond to an IN token on ISO IN endpoint with ZLP when no data is ready
-
-
-// <i> If set, ISO IN endpoint will respond to an IN token with ZLP when no data is ready to be sent.
-// <i> Else, there will be no response.
-
-#ifndef NRFX_USBD_CONFIG_ISO_IN_ZLP
-#define NRFX_USBD_CONFIG_ISO_IN_ZLP 0
-#endif
-
-// <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module
-//==========================================================
-#ifndef NRFX_USBD_CONFIG_LOG_ENABLED
-#define NRFX_USBD_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_USBD_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_USBD_CONFIG_LOG_LEVEL
-#define NRFX_USBD_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_USBD_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_USBD_CONFIG_INFO_COLOR
-#define NRFX_USBD_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_USBD_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_USBD_CONFIG_DEBUG_COLOR
-#define NRFX_USBD_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value  <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default Severity level
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nRF9160/nrfx_config.h b/modules/nrfx/templates/nRF9160/nrfx_config.h
deleted file mode 100644
index 63c5900..0000000
--- a/modules/nrfx/templates/nRF9160/nrfx_config.h
+++ /dev/null
@@ -1,2083 +0,0 @@
-#ifndef NRFX_CONFIG_H__
-#define NRFX_CONFIG_H__
-
-/*
- * The MDK provides macros for accessing the peripheral register structures
- * by using their secure and non-secure address mappings (with the names
- * containing the suffix _S or _NS, respectively). Because the nrfx drivers
- * use the macros without any suffixes, you must translate the names.
- * The following section provides configuration for the name translation.
- * It must be modified to reflect the actual configuration set in NRF_SPU.
- */
-#define NRF_CLOCK      NRF_CLOCK_S
-#define NRF_DPPIC      NRF_DPPIC_S
-#define NRF_EGU0       NRF_EGU0_S
-#define NRF_EGU1       NRF_EGU1_S
-#define NRF_EGU2       NRF_EGU2_S
-#define NRF_EGU3       NRF_EGU3_S
-#define NRF_EGU4       NRF_EGU4_S
-#define NRF_EGU5       NRF_EGU5_S
-#define NRF_FPU        NRF_FPU_S
-#define NRF_P0         NRF_P0_S
-#define NRF_I2S        NRF_I2S_S
-#define NRF_KMU        NRF_KMU_S
-#define NRF_NVMC       NRF_NVMC_S
-#define NRF_PDM        NRF_PDM_S
-#define NRF_POWER      NRF_POWER_S
-#define NRF_PWM0       NRF_PWM0_S
-#define NRF_PWM1       NRF_PWM1_S
-#define NRF_PWM2       NRF_PWM2_S
-#define NRF_PWM3       NRF_PWM3_S
-#define NRF_REGULATORS NRF_REGULATORS_S
-#define NRF_RTC0       NRF_RTC0_S
-#define NRF_RTC1       NRF_RTC1_S
-#define NRF_SAADC      NRF_SAADC_S
-#define NRF_SPIM0      NRF_SPIM0_S
-#define NRF_SPIM1      NRF_SPIM1_S
-#define NRF_SPIM2      NRF_SPIM2_S
-#define NRF_SPIM3      NRF_SPIM3_S
-#define NRF_SPIS0      NRF_SPIS0_S
-#define NRF_SPIS1      NRF_SPIS1_S
-#define NRF_SPIS2      NRF_SPIS2_S
-#define NRF_SPIS3      NRF_SPIS3_S
-#define NRF_TIMER0     NRF_TIMER0_S
-#define NRF_TIMER1     NRF_TIMER1_S
-#define NRF_TIMER2     NRF_TIMER2_S
-#define NRF_TWIM0      NRF_TWIM0_S
-#define NRF_TWIM1      NRF_TWIM1_S
-#define NRF_TWIM2      NRF_TWIM2_S
-#define NRF_TWIM3      NRF_TWIM3_S
-#define NRF_TWIS0      NRF_TWIS0_S
-#define NRF_TWIS1      NRF_TWIS1_S
-#define NRF_TWIS2      NRF_TWIS2_S
-#define NRF_TWIS3      NRF_TWIS3_S
-#define NRF_UARTE0     NRF_UARTE0_S
-#define NRF_UARTE1     NRF_UARTE1_S
-#define NRF_UARTE2     NRF_UARTE2_S
-#define NRF_UARTE3     NRF_UARTE3_S
-#define NRF_VMC        NRF_VMC_S
-#define NRF_WDT        NRF_WDT_S
-
-/*
- * The following section provides the name translation for peripherals with
- * only one type of access available. For these peripherals, you cannot choose
- * between secure and non-secure mapping.
- */
-#define NRF_CRYPTOCELL NRF_CRYPTOCELL_S
-#define NRF_FICR       NRF_FICR_S
-#define NRF_GPIOTE0    NRF_GPIOTE0_S
-#define NRF_GPIOTE1    NRF_GPIOTE1_NS
-#define NRF_SPU        NRF_SPU_S
-#define NRF_UICR       NRF_UICR_S
-
-/* Fixups for GPIOTE HAL and driver. */
-#define NRF_GPIOTE        NRF_GPIOTE0_S
-#define GPIOTE_IRQHandler GPIOTE0_IRQHandler
-
-// <<< Use Configuration Wizard in Context Menu >>>\n
-
-// <h> nRF_Drivers
-
-// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver.
-//==========================================================
-#ifndef NRFX_CLOCK_ENABLED
-#define NRFX_CLOCK_ENABLED 1
-#endif
-// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF clock source.
-
-// <1=> RC
-// <2=> XTAL
-
-#ifndef NRFX_CLOCK_CONFIG_LF_SRC
-#define NRFX_CLOCK_CONFIG_LF_SRC 2
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
-#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
-#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
-#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
-#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
-#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_DPPI_ENABLED - nrfx_dppi - DPPI allocator.
-//==========================================================
-#ifndef NRFX_DPPI_ENABLED
-#define NRFX_DPPI_ENABLED 1
-#endif
-// <e> NRFX_DPPI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_DPPI_CONFIG_LOG_ENABLED
-#define NRFX_DPPI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_DPPI_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_DPPI_CONFIG_LOG_LEVEL
-#define NRFX_DPPI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_DPPI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_DPPI_CONFIG_INFO_COLOR
-#define NRFX_DPPI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_DPPI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_DPPI_CONFIG_DEBUG_COLOR
-#define NRFX_DPPI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver.
-//==========================================================
-#ifndef NRFX_GPIOTE_ENABLED
-#define NRFX_GPIOTE_ENABLED 1
-#endif
-// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins.
-#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
-#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
-#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
-#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
-#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
-#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
-#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver.
-//==========================================================
-#ifndef NRFX_I2S_ENABLED
-#define NRFX_I2S_ENABLED 1
-#endif
-// <o> NRFX_I2S_CONFIG_SCK_PIN - SCK pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SCK_PIN
-#define NRFX_I2S_CONFIG_SCK_PIN 31
-#endif
-
-// <o> NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin  <1-31>
-
-
-#ifndef NRFX_I2S_CONFIG_LRCK_PIN
-#define NRFX_I2S_CONFIG_LRCK_PIN 30
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_PIN - MCK pin.
-#ifndef NRFX_I2S_CONFIG_MCK_PIN
-#define NRFX_I2S_CONFIG_MCK_PIN 255
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDOUT_PIN
-#define NRFX_I2S_CONFIG_SDOUT_PIN 29
-#endif
-
-// <o> NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin  <0-31>
-
-
-#ifndef NRFX_I2S_CONFIG_SDIN_PIN
-#define NRFX_I2S_CONFIG_SDIN_PIN 28
-#endif
-
-// <o> NRFX_I2S_CONFIG_MASTER  - Mode.
-
-// <0=> Master
-// <1=> Slave
-
-#ifndef NRFX_I2S_CONFIG_MASTER
-#define NRFX_I2S_CONFIG_MASTER 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_FORMAT  - Format.
-
-// <0=> I2S
-// <1=> Aligned
-
-#ifndef NRFX_I2S_CONFIG_FORMAT
-#define NRFX_I2S_CONFIG_FORMAT 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_ALIGN  - Alignment.
-
-// <0=> Left
-// <1=> Right
-
-#ifndef NRFX_I2S_CONFIG_ALIGN
-#define NRFX_I2S_CONFIG_ALIGN 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_SWIDTH  - Sample width (bits).
-
-// <0=> 8
-// <1=> 16
-// <2=> 24
-
-#ifndef NRFX_I2S_CONFIG_SWIDTH
-#define NRFX_I2S_CONFIG_SWIDTH 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_CHANNELS  - Channels.
-
-// <0=> Stereo
-// <1=> Left
-// <2=> Right
-
-#ifndef NRFX_I2S_CONFIG_CHANNELS
-#define NRFX_I2S_CONFIG_CHANNELS 1
-#endif
-
-// <o> NRFX_I2S_CONFIG_MCK_SETUP  - MCK behavior.
-
-// <0=> Disabled
-// <536870912=> 32MHz/8
-// <402653184=> 32MHz/10
-// <369098752=> 32MHz/11
-// <285212672=> 32MHz/15
-// <268435456=> 32MHz/16
-// <201326592=> 32MHz/21
-// <184549376=> 32MHz/23
-// <142606336=> 32MHz/30
-// <138412032=> 32MHz/31
-// <134217728=> 32MHz/32
-// <100663296=> 32MHz/42
-// <68157440=> 32MHz/63
-// <34340864=> 32MHz/125
-
-#ifndef NRFX_I2S_CONFIG_MCK_SETUP
-#define NRFX_I2S_CONFIG_MCK_SETUP 536870912
-#endif
-
-// <o> NRFX_I2S_CONFIG_RATIO  - MCK/LRCK ratio.
-
-// <0=> 32x
-// <1=> 48x
-// <2=> 64x
-// <3=> 96x
-// <4=> 128x
-// <5=> 192x
-// <6=> 256x
-// <7=> 384x
-// <8=> 512x
-
-#ifndef NRFX_I2S_CONFIG_RATIO
-#define NRFX_I2S_CONFIG_RATIO 5
-#endif
-
-// <o> NRFX_I2S_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY
-#define NRFX_I2S_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
-#define NRFX_I2S_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_I2S_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
-#define NRFX_I2S_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_I2S_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_INFO_COLOR
-#define NRFX_I2S_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_I2S_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
-#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_NVMC_ENABLED - nrfx_nvmc - NVMC peripheral driver
-//==========================================================
-#ifndef NRFX_NVMC_ENABLED
-#define NRFX_NVMC_ENABLED 1
-#endif
-
-// </e>
-
-// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver.
-//==========================================================
-#ifndef NRFX_PDM_ENABLED
-#define NRFX_PDM_ENABLED 1
-#endif
-// <o> NRFX_PDM_CONFIG_MODE  - Mode.
-
-// <0=> Stereo
-// <1=> Mono
-
-#ifndef NRFX_PDM_CONFIG_MODE
-#define NRFX_PDM_CONFIG_MODE 1
-#endif
-
-// <o> NRFX_PDM_CONFIG_EDGE  - Edge.
-
-// <0=> Left falling
-// <1=> Left rising
-
-#ifndef NRFX_PDM_CONFIG_EDGE
-#define NRFX_PDM_CONFIG_EDGE 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_CLOCK_FREQ  - Clock frequency.
-
-// <134217728=> 1000k
-// <138412032=> 1032k (default)
-// <142606336=> 1067k
-
-#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
-#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
-#endif
-
-// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
-#define NRFX_PDM_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
-#define NRFX_PDM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PDM_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
-#define NRFX_PDM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PDM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_INFO_COLOR
-#define NRFX_PDM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PDM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
-#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver.
-//==========================================================
-#ifndef NRFX_POWER_ENABLED
-#define NRFX_POWER_ENABLED 1
-#endif
-// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
-#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN  - The default configuration of the main DCDC regulator.
-
-
-// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
-
-#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
-#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
-#endif
-
-// </e>
-
-// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing (PRS) module.
-//==========================================================
-#ifndef NRFX_PRS_ENABLED
-#define NRFX_PRS_ENABLED 1
-#endif
-// <q> NRFX_PRS_BOX_0_ENABLED  - Enables box 0 in the module.
-
-
-#ifndef NRFX_PRS_BOX_0_ENABLED
-#define NRFX_PRS_BOX_0_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_1_ENABLED  - Enables box 1 in the module.
-
-
-#ifndef NRFX_PRS_BOX_1_ENABLED
-#define NRFX_PRS_BOX_1_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_2_ENABLED  - Enables box 2 in the module.
-
-
-#ifndef NRFX_PRS_BOX_2_ENABLED
-#define NRFX_PRS_BOX_2_ENABLED 1
-#endif
-
-// <q> NRFX_PRS_BOX_3_ENABLED  - Enables box 3 in the module.
-
-
-#ifndef NRFX_PRS_BOX_3_ENABLED
-#define NRFX_PRS_BOX_3_ENABLED 1
-#endif
-
-// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
-#define NRFX_PRS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PRS_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
-#define NRFX_PRS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PRS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_INFO_COLOR
-#define NRFX_PRS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PRS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
-#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver.
-//==========================================================
-#ifndef NRFX_PWM_ENABLED
-#define NRFX_PWM_ENABLED 1
-#endif
-// <q> NRFX_PWM0_ENABLED  - Enables PWM0 instance.
-
-
-#ifndef NRFX_PWM0_ENABLED
-#define NRFX_PWM0_ENABLED 1
-#endif
-
-// <q> NRFX_PWM1_ENABLED  - Enables PWM1 instance.
-
-
-#ifndef NRFX_PWM1_ENABLED
-#define NRFX_PWM1_ENABLED 1
-#endif
-
-// <q> NRFX_PWM2_ENABLED  - Enables PWM2 instance.
-
-
-#ifndef NRFX_PWM2_ENABLED
-#define NRFX_PWM2_ENABLED 1
-#endif
-
-// <q> NRFX_PWM3_ENABLED  - Enables PWM3 instance.
-
-
-#ifndef NRFX_PWM3_ENABLED
-#define NRFX_PWM3_ENABLED 1
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31>
-
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
-#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK  - Base clock.
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
-#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE  - Count mode.
-
-// <0=> Up
-// <1=> Up and Down
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value.
-#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
-#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE  - Load mode.
-
-// <0=> Common
-// <1=> Grouped
-// <2=> Individual
-// <3=> Waveform
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE  - Step mode.
-
-// <0=> Auto
-// <1=> Triggered
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
-#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
-#endif
-
-// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
-#define NRFX_PWM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_PWM_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
-#define NRFX_PWM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_PWM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_INFO_COLOR
-#define NRFX_PWM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_PWM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
-#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver.
-//==========================================================
-#ifndef NRFX_RTC_ENABLED
-#define NRFX_RTC_ENABLED 1
-#endif
-// <q> NRFX_RTC0_ENABLED  - Enables RTC0 instance.
-
-
-#ifndef NRFX_RTC0_ENABLED
-#define NRFX_RTC0_ENABLED 1
-#endif
-
-// <q> NRFX_RTC1_ENABLED  - Enables RTC1 instance.
-
-
-#ifndef NRFX_RTC1_ENABLED
-#define NRFX_RTC1_ENABLED 1
-#endif
-
-// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time in highest priority interrupt, in microseconds.
-#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
-#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768>
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
-#endif
-
-// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE  - Ensures safe compare event triggering.
-
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
-#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
-#endif
-
-// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
-#define NRFX_RTC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_RTC_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
-#define NRFX_RTC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_RTC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_INFO_COLOR
-#define NRFX_RTC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_RTC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
-#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver.
-//==========================================================
-#ifndef NRFX_SAADC_ENABLED
-#define NRFX_SAADC_ENABLED 1
-#endif
-// <o> NRFX_SAADC_CONFIG_RESOLUTION  - Resolution.
-
-// <0=> 8 bit
-// <1=> 10 bit
-// <2=> 12 bit
-// <3=> 14 bit
-
-#ifndef NRFX_SAADC_CONFIG_RESOLUTION
-#define NRFX_SAADC_CONFIG_RESOLUTION 1
-#endif
-
-// <o> NRFX_SAADC_CONFIG_OVERSAMPLE  - Sample period.
-
-// <0=> Disabled
-// <1=> 2x
-// <2=> 4x
-// <3=> 8x
-// <4=> 16x
-// <5=> 32x
-// <6=> 64x
-// <7=> 128x
-// <8=> 256x
-
-#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
-#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
-#endif
-
-// <q> NRFX_SAADC_CONFIG_LP_MODE  - Enables low power mode.
-
-
-#ifndef NRFX_SAADC_CONFIG_LP_MODE
-#define NRFX_SAADC_CONFIG_LP_MODE 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
-#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
-#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SAADC_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
-#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SAADC_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
-#define NRFX_SAADC_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
-#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver.
-//==========================================================
-#ifndef NRFX_SPIM_ENABLED
-#define NRFX_SPIM_ENABLED 1
-#endif
-// <q> NRFX_SPIM0_ENABLED  - Enables SPIM0 instance.
-
-
-#ifndef NRFX_SPIM0_ENABLED
-#define NRFX_SPIM0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM1_ENABLED  - Enables SPIM1 instance.
-
-
-#ifndef NRFX_SPIM1_ENABLED
-#define NRFX_SPIM1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM2_ENABLED  - Enables SPIM2 instance.
-
-
-#ifndef NRFX_SPIM2_ENABLED
-#define NRFX_SPIM2_ENABLED 1
-#endif
-
-// <q> NRFX_SPIM3_ENABLED  - Enables SPIM3 instance.
-
-
-#ifndef NRFX_SPIM3_ENABLED
-#define NRFX_SPIM3_ENABLED 1
-#endif
-
-
-// <o> NRFX_SPIM_MISO_PULL_CFG  - MISO pin pull configuration.
-
-// <0=> NRF_GPIO_PIN_NOPULL
-// <1=> NRF_GPIO_PIN_PULLDOWN
-// <3=> NRF_GPIO_PIN_PULLUP
-
-#ifndef NRFX_SPIM_MISO_PULL_CFG
-#define NRFX_SPIM_MISO_PULL_CFG 1
-#endif
-
-// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
-#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIM_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
-#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
-#define NRFX_SPIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
-#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver.
-//==========================================================
-#ifndef NRFX_SPIS_ENABLED
-#define NRFX_SPIS_ENABLED 1
-#endif
-// <q> NRFX_SPIS0_ENABLED  - Enables SPIS0 instance.
-
-
-#ifndef NRFX_SPIS0_ENABLED
-#define NRFX_SPIS0_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS1_ENABLED  - Enables SPIS1 instance.
-
-
-#ifndef NRFX_SPIS1_ENABLED
-#define NRFX_SPIS1_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS2_ENABLED  - Enables SPIS2 instance.
-
-
-#ifndef NRFX_SPIS2_ENABLED
-#define NRFX_SPIS2_ENABLED 1
-#endif
-
-// <q> NRFX_SPIS3_ENABLED  - Enables SPIS3 instance.
-
-
-#ifndef NRFX_SPIS3_ENABLED
-#define NRFX_SPIS3_ENABLED 1
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_DEF
-#define NRFX_SPIS_DEFAULT_DEF 255
-#endif
-
-// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255>
-
-
-#ifndef NRFX_SPIS_DEFAULT_ORC
-#define NRFX_SPIS_DEFAULT_ORC 255
-#endif
-
-// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
-#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SPIS_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
-#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SPIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
-#define NRFX_SPIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
-#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator.
-//==========================================================
-#ifndef NRFX_SWI_ENABLED
-#define NRFX_SWI_ENABLED 1
-#endif
-// <q> NRFX_EGU_ENABLED  - Enables EGU support.
-
-
-#ifndef NRFX_EGU_ENABLED
-#define NRFX_EGU_ENABLED 1
-#endif
-
-// <q> NRFX_SWI0_DISABLED  - Excludes SWI0 from being utilized by the driver.
-
-
-#ifndef NRFX_SWI0_DISABLED
-#define NRFX_SWI0_DISABLED 0
-#endif
-
-// <q> NRFX_SWI1_DISABLED  - Excludes SWI1 from being utilized by the driver.
-
-
-#ifndef NRFX_SWI1_DISABLED
-#define NRFX_SWI1_DISABLED 0
-#endif
-
-// <q> NRFX_SWI2_DISABLED  - Excludes SWI2 from being utilized by the driver.
-
-
-#ifndef NRFX_SWI2_DISABLED
-#define NRFX_SWI2_DISABLED 0
-#endif
-
-// <q> NRFX_SWI3_DISABLED  - Excludes SWI3 from being utilized by the driver.
-
-
-#ifndef NRFX_SWI3_DISABLED
-#define NRFX_SWI3_DISABLED 0
-#endif
-
-// <q> NRFX_SWI4_DISABLED  - Excludes SWI4 from being utilized by the driver.
-
-
-#ifndef NRFX_SWI4_DISABLED
-#define NRFX_SWI4_DISABLED 0
-#endif
-
-// <q> NRFX_SWI5_DISABLED  - Excludes SWI5 from being utilized by the driver.
-
-
-#ifndef NRFX_SWI5_DISABLED
-#define NRFX_SWI5_DISABLED 0
-#endif
-
-// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
-#define NRFX_SWI_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_SWI_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
-#define NRFX_SWI_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_SWI_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_INFO_COLOR
-#define NRFX_SWI_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_SWI_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
-#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <q> NRFX_SYSTICK_ENABLED  - nrfx_systick - ARM(R) SysTick driver.
-
-
-#ifndef NRFX_SYSTICK_ENABLED
-#define NRFX_SYSTICK_ENABLED 1
-#endif
-
-// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver.
-//==========================================================
-#ifndef NRFX_TIMER_ENABLED
-#define NRFX_TIMER_ENABLED 1
-#endif
-// <q> NRFX_TIMER0_ENABLED  - Enables TIMER0 instance.
-
-
-#ifndef NRFX_TIMER0_ENABLED
-#define NRFX_TIMER0_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER1_ENABLED  - Enables TIMER1 instance.
-
-
-#ifndef NRFX_TIMER1_ENABLED
-#define NRFX_TIMER1_ENABLED 1
-#endif
-
-// <q> NRFX_TIMER2_ENABLED  - Enables TIMER2 instance.
-
-
-#ifndef NRFX_TIMER2_ENABLED
-#define NRFX_TIMER2_ENABLED 1
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY  - Timer frequency if in Timer mode.
-
-// <0=> 16 MHz
-// <1=> 8 MHz
-// <2=> 4 MHz
-// <3=> 2 MHz
-// <4=> 1 MHz
-// <5=> 500 kHz
-// <6=> 250 kHz
-// <7=> 125 kHz
-// <8=> 62.5 kHz
-// <9=> 31.25 kHz
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE  - Timer mode or operation.
-
-// <0=> Timer
-// <1=> Counter
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
-#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH  - Timer counter bit width.
-
-// <0=> 16 bit
-// <1=> 8 bit
-// <2=> 24 bit
-// <3=> 32 bit
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
-#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
-#endif
-
-// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
-#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TIMER_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
-#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TIMER_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
-#define NRFX_TIMER_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
-#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver.
-//==========================================================
-#ifndef NRFX_TWIM_ENABLED
-#define NRFX_TWIM_ENABLED 1
-#endif
-// <q> NRFX_TWIM0_ENABLED  - Enables TWIM0 instance.
-
-
-#ifndef NRFX_TWIM0_ENABLED
-#define NRFX_TWIM0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM1_ENABLED  - Enables TWIM1 instance.
-
-
-#ifndef NRFX_TWIM1_ENABLED
-#define NRFX_TWIM1_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM2_ENABLED  - Enables TWIM2 instance.
-
-
-#ifndef NRFX_TWIM2_ENABLED
-#define NRFX_TWIM2_ENABLED 1
-#endif
-
-// <q> NRFX_TWIM3_ENABLED  - Enables TWIM3 instance.
-
-
-#ifndef NRFX_TWIM3_ENABLED
-#define NRFX_TWIM3_ENABLED 1
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY  - Frequency.
-
-// <26738688=> 100k
-// <67108864=> 250k
-// <104857600=> 400k
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
-#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
-#endif
-
-// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT  - Enables bus holding after uninit.
-
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
-#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
-#endif
-
-// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
-#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIM_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
-#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIM_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
-#define NRFX_TWIM_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
-#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver.
-//==========================================================
-#ifndef NRFX_TWIS_ENABLED
-#define NRFX_TWIS_ENABLED 1
-#endif
-// <q> NRFX_TWIS0_ENABLED  - Enables TWIS0 instance.
-
-
-#ifndef NRFX_TWIS0_ENABLED
-#define NRFX_TWIS0_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS1_ENABLED  - Enables TWIS1 instance.
-
-
-#ifndef NRFX_TWIS1_ENABLED
-#define NRFX_TWIS1_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS2_ENABLED  - Enables TWIS2 instance.
-
-
-#ifndef NRFX_TWIS2_ENABLED
-#define NRFX_TWIS2_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS3_ENABLED  - Enables TWIS3 instance.
-
-
-#ifndef NRFX_TWIS3_ENABLED
-#define NRFX_TWIS3_ENABLED 1
-#endif
-
-// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY  - Assumes that any instance would be initialized only once.
-
-
-// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
-
-#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
-#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
-#endif
-
-// <q> NRFX_TWIS_NO_SYNC_MODE  - Removes support for synchronous mode.
-
-
-// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
-
-#ifndef NRFX_TWIS_NO_SYNC_MODE
-#define NRFX_TWIS_NO_SYNC_MODE 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0.
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1.
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
-#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL  - SCL pin pull configuration.
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL  - SDA pin pull configuration.
-
-// <0=> Disabled
-// <1=> Pull down
-// <3=> Pull up
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
-#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
-#endif
-
-// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
-#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_TWIS_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
-#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_TWIS_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
-#define NRFX_TWIS_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
-#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver.
-//==========================================================
-#ifndef NRFX_UARTE_ENABLED
-#define NRFX_UARTE_ENABLED 1
-#endif
-// <q> NRFX_UARTE0_ENABLED - Enables UARTE0 instances
-#ifndef NRFX_UARTE0_ENABLED
-#define NRFX_UARTE0_ENABLED 1
-#endif
-
-// <q> NRFX_UARTE1_ENABLED - Enables UARTE1 instance.
-#ifndef NRFX_UARTE1_ENABLED
-#define NRFX_UARTE1_ENABLED 1
-#endif
-
-// <q> NRFX_UARTE2_ENABLED - Enables UARTE2 instance.
-#ifndef NRFX_UARTE2_ENABLED
-#define NRFX_UARTE2_ENABLED 1
-#endif
-
-// <q> NRFX_UARTE3_ENABLED - Enables UARTE3 instance.
-#ifndef NRFX_UARTE3_ENABLED
-#define NRFX_UARTE3_ENABLED 1
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC  - Hardware Flow Control.
-
-// <0=> Disabled
-// <1=> Enabled
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
-#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY  - Parity.
-
-// <0=> Excluded
-// <14=> Included
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
-#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE  - Default baud rate.
-
-// <323584=> 1200 baud
-// <643072=> 2400 baud
-// <1290240=> 4800 baud
-// <2576384=> 9600 baud
-// <3862528=> 14400 baud
-// <5152768=> 19200 baud
-// <7716864=> 28800 baud
-// <8388608=> 31250 baud
-// <10289152=> 38400 baud
-// <15007744=> 56000 baud
-// <15400960=> 57600 baud
-// <20615168=> 76800 baud
-// <30801920=> 115200 baud
-// <61865984=> 230400 baud
-// <67108864=> 250000 baud
-// <121634816=> 460800 baud
-// <251658240=> 921600 baud
-// <268435456=> 1000000 baud
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
-#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
-#endif
-
-// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
-#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
-#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_UARTE_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
-#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_UARTE_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
-#define NRFX_UARTE_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
-#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver.
-//==========================================================
-#ifndef NRFX_WDT_ENABLED
-#define NRFX_WDT_ENABLED 1
-#endif
-// <o> NRFX_WDT_CONFIG_BEHAVIOUR  - WDT behavior in CPU SLEEP or HALT mode.
-
-// <1=> Run in SLEEP, Pause in HALT
-// <8=> Pause in SLEEP, Run in HALT
-// <9=> Run in SLEEP and HALT
-// <0=> Pause in SLEEP and HALT
-
-#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
-#define NRFX_WDT_CONFIG_BEHAVIOUR 1
-#endif
-
-// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295>
-
-
-#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
-#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
-#endif
-
-// <o> NRFX_WDT_CONFIG_NO_IRQ  - Remove WDT IRQ handling from WDT driver
-
-// <0=> Include WDT IRQ handling
-// <1=> Remove WDT IRQ handling
-
-#ifndef NRFX_WDT_CONFIG_NO_IRQ
-#define NRFX_WDT_CONFIG_NO_IRQ 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY  - Interrupt priority.
-
-// <0=> 0 (highest)
-// <1=> 1
-// <2=> 2
-// <3=> 3
-// <4=> 4
-// <5=> 5
-// <6=> 6
-// <7=> 7
-
-#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
-#define NRFX_WDT_CONFIG_IRQ_PRIORITY 7
-#endif
-
-// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
-//==========================================================
-#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
-#define NRFX_WDT_CONFIG_LOG_ENABLED 0
-#endif
-// <o> NRFX_WDT_CONFIG_LOG_LEVEL  - Default severity level.
-
-// <0=> Off
-// <1=> Error
-// <2=> Warning
-// <3=> Info
-// <4=> Debug
-
-#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
-#define NRFX_WDT_CONFIG_LOG_LEVEL 3
-#endif
-
-// <o> NRFX_WDT_CONFIG_INFO_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_INFO_COLOR
-#define NRFX_WDT_CONFIG_INFO_COLOR 0
-#endif
-
-// <o> NRFX_WDT_CONFIG_DEBUG_COLOR  - ANSI escape code prefix.
-
-// <0=> Default
-// <1=> Black
-// <2=> Red
-// <3=> Green
-// <4=> Yellow
-// <5=> Blue
-// <6=> Magenta
-// <7=> Cyan
-// <8=> White
-
-#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
-#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
-#endif
-
-// </e>
-
-// </e>
-
-// </h>
-
-#endif // NRFX_CONFIG_H__
diff --git a/modules/nrfx/templates/nrfx_glue.h b/modules/nrfx/templates/nrfx_glue.h
deleted file mode 100644
index aca1ef8..0000000
--- a/modules/nrfx/templates/nrfx_glue.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/**
- * Copyright (c) 2017 - 2021, Nordic Semiconductor ASA
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- *    list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form, except as embedded into a Nordic
- *    Semiconductor ASA integrated circuit in a product or a software update for
- *    such product, must reproduce the above copyright notice, this list of
- *    conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
- *    contributors may be used to endorse or promote products derived from this
- *    software without specific prior written permission.
- *
- * 4. This software, with or without modification, must only be used with a
- *    Nordic Semiconductor ASA integrated circuit.
- *
- * 5. Any software provided in binary form under this license must not be reverse
- *    engineered, decompiled, modified and/or disassembled.
- *
- * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef NRFX_GLUE_H__
-#define NRFX_GLUE_H__
-
-// THIS IS A TEMPLATE FILE.
-// It should be copied to a suitable location within the host environment into
-// which nrfx is integrated, and the following macros should be provided with
-// appropriate implementations.
-// And this comment should be removed from the customized file.
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @defgroup nrfx_glue nrfx_glue.h
- * @{
- * @ingroup nrfx
- *
- * @brief This file contains macros that should be implemented according to
- *        the needs of the host environment into which @em nrfx is integrated.
- */
-
-// Uncomment this line to use the standard MDK way of binding IRQ handlers
-// at linking time.
-//#include <soc/nrfx_irqs.h>
-
-//------------------------------------------------------------------------------
-
-/**
- * @brief Macro for placing a runtime assertion.
- *
- * @param expression Expression to be evaluated.
- */
-#define NRFX_ASSERT(expression)
-
-/**
- * @brief Macro for placing a compile time assertion.
- *
- * @param expression Expression to be evaluated.
- */
-#define NRFX_STATIC_ASSERT(expression)
-
-//------------------------------------------------------------------------------
-
-/**
- * @brief Macro for setting the priority of a specific IRQ.
- *
- * @param irq_number IRQ number.
- * @param priority   Priority to be set.
- */
-#define NRFX_IRQ_PRIORITY_SET(irq_number, priority)
-
-/**
- * @brief Macro for enabling a specific IRQ.
- *
- * @param irq_number IRQ number.
- */
-#define NRFX_IRQ_ENABLE(irq_number)
-
-/**
- * @brief Macro for checking if a specific IRQ is enabled.
- *
- * @param irq_number IRQ number.
- *
- * @retval true  If the IRQ is enabled.
- * @retval false Otherwise.
- */
-#define NRFX_IRQ_IS_ENABLED(irq_number)
-
-/**
- * @brief Macro for disabling a specific IRQ.
- *
- * @param irq_number IRQ number.
- */
-#define NRFX_IRQ_DISABLE(irq_number)
-
-/**
- * @brief Macro for setting a specific IRQ as pending.
- *
- * @param irq_number IRQ number.
- */
-#define NRFX_IRQ_PENDING_SET(irq_number)
-
-/**
- * @brief Macro for clearing the pending status of a specific IRQ.
- *
- * @param irq_number IRQ number.
- */
-#define NRFX_IRQ_PENDING_CLEAR(irq_number)
-
-/**
- * @brief Macro for checking the pending status of a specific IRQ.
- *
- * @retval true  If the IRQ is pending.
- * @retval false Otherwise.
- */
-#define NRFX_IRQ_IS_PENDING(irq_number)
-
-/** @brief Macro for entering into a critical section. */
-#define NRFX_CRITICAL_SECTION_ENTER()
-
-/** @brief Macro for exiting from a critical section. */
-#define NRFX_CRITICAL_SECTION_EXIT()
-
-//------------------------------------------------------------------------------
-
-/**
- * @brief When set to a non-zero value, this macro specifies that
- *        @ref nrfx_coredep_delay_us uses a precise DWT-based solution.
- *        A compilation error is generated if the DWT unit is not present
- *        in the SoC used.
- */
-#define NRFX_DELAY_DWT_BASED    0
-
-/**
- * @brief Macro for delaying the code execution for at least the specified time.
- *
- * @param us_time Number of microseconds to wait.
- */
-#define NRFX_DELAY_US(us_time)
-
-//------------------------------------------------------------------------------
-
-/** @brief Atomic 32-bit unsigned type. */
-#define nrfx_atomic_t
-
-/**
- * @brief Macro for storing a value to an atomic object and returning its previous value.
- *
- * @param[in] p_data Atomic memory pointer.
- * @param[in] value  Value to store.
- *
- * @return Previous value of the atomic object.
- */
-#define NRFX_ATOMIC_FETCH_STORE(p_data, value)
-
-/**
- * @brief Macro for running a bitwise OR operation on an atomic object and returning its previous value.
- *
- * @param[in] p_data Atomic memory pointer.
- * @param[in] value  Value of the second operand in the OR operation.
- *
- * @return Previous value of the atomic object.
- */
-#define NRFX_ATOMIC_FETCH_OR(p_data, value)
-
-/**
- * @brief Macro for running a bitwise AND operation on an atomic object
- *        and returning its previous value.
- *
- * @param[in] p_data Atomic memory pointer.
- * @param[in] value  Value of the second operand in the AND operation.
- *
- * @return Previous value of the atomic object.
- */
-#define NRFX_ATOMIC_FETCH_AND(p_data, value)
-
-/**
- * @brief Macro for running a bitwise XOR operation on an atomic object
- *        and returning its previous value.
- *
- * @param[in] p_data Atomic memory pointer.
- * @param[in] value  Value of the second operand in the XOR operation.
- *
- * @return Previous value of the atomic object.
- */
-#define NRFX_ATOMIC_FETCH_XOR(p_data, value)
-
-/**
- * @brief Macro for running an addition operation on an atomic object
- *        and returning its previous value.
- *
- * @param[in] p_data Atomic memory pointer.
- * @param[in] value  Value of the second operand in the ADD operation.
- *
- * @return Previous value of the atomic object.
- */
-#define NRFX_ATOMIC_FETCH_ADD(p_data, value)
-
-/**
- * @brief Macro for running a subtraction operation on an atomic object
- *        and returning its previous value.
- *
- * @param[in] p_data Atomic memory pointer.
- * @param[in] value  Value of the second operand in the SUB operation.
- *
- * @return Previous value of the atomic object.
- */
-#define NRFX_ATOMIC_FETCH_SUB(p_data, value)
-
-//------------------------------------------------------------------------------
-
-/**
- * @brief When set to a non-zero value, this macro specifies that the
- *        @ref nrfx_error_codes and the @ref nrfx_err_t type itself are defined
- *        in a customized way and the default definitions from @c <nrfx_error.h>
- *        should not be used.
- */
-#define NRFX_CUSTOM_ERROR_CODES 0
-
-//------------------------------------------------------------------------------
-
-/** @brief Bitmask that defines DPPI channels that are reserved for use outside of the nrfx library. */
-#define NRFX_DPPI_CHANNELS_USED  0
-
-/** @brief Bitmask that defines DPPI groups that are reserved for use outside of the nrfx library. */
-#define NRFX_DPPI_GROUPS_USED    0
-
-/** @brief Bitmask that defines PPI channels that are reserved for use outside of the nrfx library. */
-#define NRFX_PPI_CHANNELS_USED  0
-
-/** @brief Bitmask that defines PPI groups that are reserved for use outside of the nrfx library. */
-#define NRFX_PPI_GROUPS_USED    0
-
-/** @brief Bitmask that defines SWI instances that are reserved for use outside of the nrfx library. */
-#define NRFX_SWI_USED           0
-
-/** @brief Bitmask that defines TIMER instances that are reserved for use outside of the nrfx library. */
-#define NRFX_TIMERS_USED        0
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif // NRFX_GLUE_H__
diff --git a/modules/nrfx/templates/nrfx_log.h b/modules/nrfx/templates/nrfx_log.h
deleted file mode 100644
index a47c8d8..0000000
--- a/modules/nrfx/templates/nrfx_log.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/**
- * Copyright (c) 2017 - 2021, Nordic Semiconductor ASA
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice, this
- *    list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form, except as embedded into a Nordic
- *    Semiconductor ASA integrated circuit in a product or a software update for
- *    such product, must reproduce the above copyright notice, this list of
- *    conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
- *    contributors may be used to endorse or promote products derived from this
- *    software without specific prior written permission.
- *
- * 4. This software, with or without modification, must only be used with a
- *    Nordic Semiconductor ASA integrated circuit.
- *
- * 5. Any software provided in binary form under this license must not be reverse
- *    engineered, decompiled, modified and/or disassembled.
- *
- * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#ifndef NRFX_LOG_H__
-#define NRFX_LOG_H__
-
-// THIS IS A TEMPLATE FILE.
-// It should be copied to a suitable location within the host environment into
-// which nrfx is integrated, and the following macros should be provided with
-// appropriate implementations.
-// And this comment should be removed from the customized file.
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/**
- * @defgroup nrfx_log nrfx_log.h
- * @{
- * @ingroup nrfx
- *
- * @brief This file contains macros that should be implemented according to
- *        the needs of the host environment into which @em nrfx is integrated.
- */
-
-/**
- * @brief Macro for logging a message with the severity level ERROR.
- *
- * @param format printf-style format string, optionally followed by arguments
- *               to be formatted and inserted in the resulting string.
- */
-#define NRFX_LOG_ERROR(format, ...)
-
-/**
- * @brief Macro for logging a message with the severity level WARNING.
- *
- * @param format printf-style format string, optionally followed by arguments
- *               to be formatted and inserted in the resulting string.
- */
-#define NRFX_LOG_WARNING(format, ...)
-
-/**
- * @brief Macro for logging a message with the severity level INFO.
- *
- * @param format printf-style format string, optionally followed by arguments
- *               to be formatted and inserted in the resulting string.
- */
-#define NRFX_LOG_INFO(format, ...)
-
-/**
- * @brief Macro for logging a message with the severity level DEBUG.
- *
- * @param format printf-style format string, optionally followed by arguments
- *               to be formatted and inserted in the resulting string.
- */
-#define NRFX_LOG_DEBUG(format, ...)
-
-
-/**
- * @brief Macro for logging a memory dump with the severity level ERROR.
- *
- * @param[in] p_memory Pointer to the memory region to be dumped.
- * @param[in] length   Length of the memory region in bytes.
- */
-#define NRFX_LOG_HEXDUMP_ERROR(p_memory, length)
-
-/**
- * @brief Macro for logging a memory dump with the severity level WARNING.
- *
- * @param[in] p_memory Pointer to the memory region to be dumped.
- * @param[in] length   Length of the memory region in bytes.
- */
-#define NRFX_LOG_HEXDUMP_WARNING(p_memory, length)
-
-/**
- * @brief Macro for logging a memory dump with the severity level INFO.
- *
- * @param[in] p_memory Pointer to the memory region to be dumped.
- * @param[in] length   Length of the memory region in bytes.
- */
-#define NRFX_LOG_HEXDUMP_INFO(p_memory, length)
-
-/**
- * @brief Macro for logging a memory dump with the severity level DEBUG.
- *
- * @param[in] p_memory Pointer to the memory region to be dumped.
- * @param[in] length   Length of the memory region in bytes.
- */
-#define NRFX_LOG_HEXDUMP_DEBUG(p_memory, length)
-
-
-/**
- * @brief Macro for getting the textual representation of a given error code.
- *
- * @param[in] error_code Error code.
- *
- * @return String containing the textual representation of the error code.
- */
-#define NRFX_LOG_ERROR_STRING_GET(error_code)
-
-/** @} */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif // NRFX_LOG_H__