调整广播策略

include/znordic.h

@@ -53,7 +53,6 @@ void znordic_loop();
 
 void    znrf_gpio_cfg_output(uint32_t pin_number, nrf_gpio_pin_pull_t pull);
 int16_t znrf_adc_channel_read_val(uint16_t channel);
-void    znordic_set_uart_log_pin(uint32_t pin_number);
 
 bool znordic_rtc_has_setted();
 

src/zble_module.c

@@ -21,8 +21,6 @@
 #define CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS)  /**< Connection supervisory timeout (4 seconds), Supervision Timeout uses 10 ms units. */
 #define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN  /**< UUID type for the Nordic UART Service (vendor specific). */
 
-#define APP_ADV_INTERVAL 64         /**< The advertising interval (in units of 0.625 ms. This value corresponds to 40 ms). */
-#define APP_ADV_DURATION 18000      /**< The advertising duration (180 seconds) in units of 10 milliseconds. */
 BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */
 
 /*******************************************************************************
@@ -129,14 +127,18 @@ static void on_conn_params_evt(ble_conn_params_evt_t *p_evt)
 static void conn_params_error_handler(uint32_t nrf_error) { APP_ERROR_HANDLER(nrf_error); }
 static void on_adv_evt(ble_adv_evt_t ble_adv_evt)
 {
+
   switch (ble_adv_evt)
   {
   case BLE_ADV_EVT_FAST:
-    // err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING);
-    // ZERROR_CHECK(err_code);
+    ZLOGI("Fast advertising");
     break;
+      case BLE_ADV_EVT_SLOW:
+    ZLOGI("Slow advertising");
+    break;
+
   case BLE_ADV_EVT_IDLE:
-    // sleep_mode_enter();
+    ZLOGI("Advertising stopped");
     break;
   default:
     break;
@@ -236,13 +238,13 @@ NRF_SDH_STATE_OBSERVER(m_buttonless_dfu_state_obs, 0) = {
     .handler = buttonless_dfu_sdh_state_observer,
 };
 
-static void advertising_config_get(ble_adv_modes_config_t *p_config)
+static void dfu_advertising_config_get(ble_adv_modes_config_t *p_config)
 {
   memset(p_config, 0, sizeof(ble_adv_modes_config_t));
 
   p_config->ble_adv_fast_enabled = true;
-  p_config->ble_adv_fast_interval = APP_ADV_INTERVAL;
-  p_config->ble_adv_fast_timeout = APP_ADV_DURATION;
+  p_config->ble_adv_fast_interval = 64;
+  p_config->ble_adv_fast_timeout = 3000;//30s
 }
 
 static void disconnect(uint16_t conn_handle, void *p_context)
@@ -275,7 +277,7 @@ static void ble_dfu_evt_handler(ble_dfu_buttonless_evt_type_t event)
 
     // Prevent device from advertising on disconnect.
     ble_adv_modes_config_t config;
-    advertising_config_get(&config);
+    dfu_advertising_config_get(&config);
     config.ble_adv_on_disconnect_disabled = true;
     ble_advertising_modes_config_set(&m_advertising, &config);
 
@@ -399,9 +401,15 @@ void zble_module_init(zble_module_cfg_t *cfg)
     init.srdata.uuids_complete.uuid_cnt = 0;
     init.srdata.uuids_complete.p_uuids = NULL;
 
+
     init.config.ble_adv_fast_enabled = true;
-    init.config.ble_adv_fast_interval = APP_ADV_INTERVAL;
-    init.config.ble_adv_fast_timeout = 0;
+    init.config.ble_adv_fast_interval = 64; //*0.625ms
+    init.config.ble_adv_fast_timeout = 500; //*10ms
+
+    init.config.ble_adv_slow_enabled = true;
+    init.config.ble_adv_slow_interval = 32*100;//*0.625ms
+    init.config.ble_adv_slow_timeout =0 ;//*10ms
+
     init.evt_handler = on_adv_evt;
 
     err_code = ble_advertising_init(&m_advertising, &init);

src/znordic.c

@@ -250,9 +250,3 @@ static DWORD get_fattime_0(uint32_t year, uint32_t month, uint32_t day, uint32_t
 
 DWORD get_fattime(void) { return get_fattime_0(2024, 1, 23, 23, 29, 31); }
 
-extern uint32_t g_nrf_log_tx_pin;
-void            znordic_set_uart_log_pin(uint32_t pin_number) {
-#if NRF_LOG_BACKEND_UART_ENABLED
-  g_nrf_log_tx_pin = pin_number;
-#endif
-}