update

src/zble_module.c

@@ -157,8 +157,10 @@ void zble_module_reglistener(zble_event_listener_t event_listener) { m_event_lis
  *
  * @retval  True if shutdown is allowed by this power manager handler, otherwise false.
  */
-static bool app_shutdown_handler(nrf_pwr_mgmt_evt_t event) {
-  switch (event) {
+static bool app_shutdown_handler(nrf_pwr_mgmt_evt_t event)
+{
+    switch (event)
+    {
         case NRF_PWR_MGMT_EVT_PREPARE_DFU:
             NRF_LOG_INFO("Power management wants to reset to DFU mode.");
             // YOUR_JOB: Get ready to reset into DFU mode
@@ -201,8 +203,11 @@ static bool app_shutdown_handler(nrf_pwr_mgmt_evt_t event) {
  */
 NRF_PWR_MGMT_HANDLER_REGISTER(app_shutdown_handler, 0);
 
-static void buttonless_dfu_sdh_state_observer(nrf_sdh_state_evt_t state, void* p_context) {
-  if (state == NRF_SDH_EVT_STATE_DISABLED) {
+
+static void buttonless_dfu_sdh_state_observer(nrf_sdh_state_evt_t state, void * p_context)
+{
+    if (state == NRF_SDH_EVT_STATE_DISABLED)
+    {
         // Softdevice was disabled before going into reset. Inform bootloader to skip CRC on next boot.
         nrf_power_gpregret2_set(BOOTLOADER_DFU_SKIP_CRC);
 
@@ -212,11 +217,14 @@ static void buttonless_dfu_sdh_state_observer(nrf_sdh_state_evt_t state, void* p
 }
 
 /* nrf_sdh state observer. */
-NRF_SDH_STATE_OBSERVER(m_buttonless_dfu_state_obs, 0) = {
+NRF_SDH_STATE_OBSERVER(m_buttonless_dfu_state_obs, 0) =
+{
     .handler = buttonless_dfu_sdh_state_observer,
 };
 
-static void advertising_config_get(ble_adv_modes_config_t* p_config) {
+
+static void advertising_config_get(ble_adv_modes_config_t * p_config)
+{
     memset(p_config, 0, sizeof(ble_adv_modes_config_t));
 
     p_config->ble_adv_fast_enabled  = true;
@@ -224,25 +232,34 @@ static void advertising_config_get(ble_adv_modes_config_t* p_config) {
     p_config->ble_adv_fast_timeout  = APP_ADV_DURATION;
 }
 
-static void disconnect(uint16_t conn_handle, void* p_context) {
+
+static void disconnect(uint16_t conn_handle, void * p_context)
+{
     UNUSED_PARAMETER(p_context);
 
     ret_code_t err_code = sd_ble_gap_disconnect(conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
-  if (err_code != NRF_SUCCESS) {
+    if (err_code != NRF_SUCCESS)
+    {
         NRF_LOG_WARNING("Failed to disconnect connection. Connection handle: %d Error: %d", conn_handle, err_code);
-  } else {
+    }
+    else
+    {
         NRF_LOG_DEBUG("Disconnected connection handle %d", conn_handle);
     }
 }
 
+
 // YOUR_JOB: Update this code if you want to do anything given a DFU event (optional).
 /**@brief Function for handling dfu events from the Buttonless Secure DFU service
  *
  * @param[in]   event   Event from the Buttonless Secure DFU service.
  */
-static void ble_dfu_evt_handler(ble_dfu_buttonless_evt_type_t event) {
-  switch (event) {
-    case BLE_DFU_EVT_BOOTLOADER_ENTER_PREPARE: {
+static void ble_dfu_evt_handler(ble_dfu_buttonless_evt_type_t event)
+{
+    switch (event)
+    {
+        case BLE_DFU_EVT_BOOTLOADER_ENTER_PREPARE:
+        {
             NRF_LOG_INFO("Device is preparing to enter bootloader mode.");
 
             // Prevent device from advertising on disconnect.