p_dynamic_electrocardiograph
/
one_lead_ecg_ads1291
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

update

master
zhaohe 1 year ago
parent
4b8ff788e7
commit
d19cf32a70
123 changed files with 9860 additions and 9956 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 20
      .vscode/settings.json
  2. 356
      app/app.uvoptx
  3. 272
      app/app.uvprojx
  4. 2
      app/config/sdk_config.h
  5. 1
      app/src/app_event.h
  6. 14
      app/src/aproject_config/config.h
  7. 14
      app/src/basic/device_version_info_mgr.h
  8. 0
      app/src/basic/m24m02/m24m02.c
  9. 0
      app/src/basic/m24m02/m24m02.h
  10. 12
      app/src/basic/version.h
  11. 16
      app/src/basic_service/app_event.h
  12. 4
      app/src/basic_service/app_event_distribute.c
  13. 2
      app/src/basic_service/app_event_distribute.h
  14. 0
      app/src/basic_service/device_state.c
  15. 18
      app/src/basic_service/device_state.h
  16. 3
      app/src/basic_service/device_version_info_mgr.c
  17. 16
      app/src/basic_service/device_version_info_mgr.h
  18. 133
      app/src/board/ads1291/ads1291.c
  19. 28
      app/src/board/ads1291/ads1291.h
  20. 330
      app/src/board/ads1291/ads1291_type.h
  21. 337
      app/src/board/ads1291/ads1292r_typ.h
  22. 2
      app/src/board/board_adc_module_ctrl.h
  23. 2
      app/src/board/board_battery_state.c
  24. 2
      app/src/board/board_battery_state.h
  25. 2
      app/src/board/board_beep_ctrl.h
  26. 37
      app/src/board/board_ecg_sensor.c
  27. 2
      app/src/board/board_ecg_sensor.h
  28. 2
      app/src/board/board_eeprom_driver.c
  29. 3
      app/src/board/board_light_ctrl.c
  30. 2
      app/src/board/board_light_ctrl.h
  31. 6
      app/src/board/board_ssd1306_interface.c
  32. 4
      app/src/board/board_ssd1306_interface.h
  33. 0
      app/src/board/ssd1306/driver_ssd1306.c
  34. 0
      app/src/board/ssd1306/driver_ssd1306.h
  35. 0
      app/src/board/ssd1306/driver_ssd1306_basic.c
  36. 0
      app/src/board/ssd1306/driver_ssd1306_basic.h
  37. 0
      app/src/board/ssd1306/driver_ssd1306_font.h
  38. 0
      app/src/board/ssd1306/driver_ssd1306_interface.h
  39. 0
      app/src/board/ssd1306/fontlib.c
  40. 0
      app/src/board/ssd1306/fontlib.h
  41. 0
      app/src/board/ssd1306/wave_drawer.c
  42. 0
      app/src/board/ssd1306/wave_drawer.h
  43. 3
      app/src/config.h
  44. 0
      app/src/device_controler.c
  45. 0
      app/src/device_controler.h
  46. 5
      app/src/display_manager_res.h
  47. 9
      app/src/heart_ware_sample_data_mgr.h
  48. 107
      app/src/heart_wave_sample_data_pre_process.c
  49. 8
      app/src/main.c
  50. 18
      app/src/one_conduction_main.c
  51. 13
      app/src/service/ble_cmd_processer/ble_cmd_process_service.c
  52. 2
      app/src/service/ble_cmd_processer/ble_cmd_process_service.h
  53. 5
      app/src/service/display_mgr/display_manager.c
  54. 0
      app/src/service/display_mgr/display_manager.h
  55. 0
      app/src/service/display_mgr/font.h
  56. 6
      app/src/service/heart_wave_sample_service/heart_ware_sample_data_mgr.c
  57. 9
      app/src/service/heart_wave_sample_service/heart_ware_sample_data_mgr.h
  58. 12
      app/src/service/heart_wave_sample_service/heart_wave_sample_data_pre_process.c
  59. 2
      app/src/service/heart_wave_sample_service/heart_wave_sample_data_pre_process.h
  60. 7
      app/src/service/heart_wave_sample_service/heart_wave_sample_service.c
  61. 0
      app/src/service/heart_wave_sample_service/heart_wave_sample_service.h
  62. 1
      app/src/service/storage/sample_data_manager.c
  63. 2
      app/src/service/storage/sample_data_manager.h
  64. 3
      app/src/service/storage/storage_service.h
  65. 0
      app/src/service/storage/zeeprom_fs.c
  66. 0
      app/src/service/storage/zeeprom_fs.h
  67. 0
      bak/FIR.c
  68. 0
      bak/FIR.h
  69. 0
      bak/HC_Chen_detect.c
  70. 0
      bak/HC_Chen_detect.h
  71. 0
      bak/Pan_Tompkins_detect.c
  72. 0
      bak/Pan_Tompkins_detect.h
  73. 0
      bak/QRS.h
  74. 0
      bak/So_Chen_detect.c
  75. 0
      bak/So_Chen_detect.h
  76. 0
      bak/adaptive_algorithm.c
  77. 0
      bak/adaptive_algorithm.h
  78. 0
      bak/qrs_time_domain_zh.c
  79. 0
      bak/qrs_time_domain_zh.h
  80. 2
      libznordic
  81. 2
      sdk

20
.vscode/settings.json
View File

@ -89,9 +89,9 @@
"stdarg.h": "c",
"nrf_uarte.h": "c",
"heart_rate_sensor_protocol.h": "c",
"ble_cmd_process_service.h": "c",
"service/ble_cmd_processer/ble_cmd_process_service.h": "c",
"heart_wave_sample_service.h": "c",
"basic/device_version_info_mgr.h": "c",
"basic_service/device_version_info_mgr.h": "c",
"nrf_uart.h": "c",
"ads_cfg.h": "c",
"sdk_config.h": "c",
@ -103,11 +103,11 @@
"board_battery_state.h": "c",
"board_sdcard_driver.h": "c",
"board_button.h": "c",
"app_event_distribute.h": "c",
"basic_service/app_event_distribute.h": "c",
"board_beep_ctrl.h": "c",
"nrf_soc.h": "c",
"sample_data_manager_service.h": "c",
"app_event.h": "c",
"basic_service/app_event.h": "c",
"compiler_abstraction.h": "c",
"ble_nus_c.h": "c",
"device_version_info_mgr.h": "c",
@ -115,7 +115,7 @@
"filter.h": "c",
"filters.h": "c",
"nrfx_rtc.h": "c",
"device_state.h": "c",
"basic_service/device_state.h": "c",
"board_adc_module_ctrl.h": "c",
"board_ecg_sensor.h": "c",
"board_light_ctrl.h": "c",
@ -191,7 +191,15 @@
"heart_ware_sample_data_mgr.h": "c",
"time.h": "c",
"nrf_gpio.h": "c",
"nrf_drv_clock.h": "c"
"nrf_drv_clock.h": "c",
"ads1291_type.h": "c",
"qrs.h": "c",
"app_event.h": "c",
"app_event_distribute.h": "c",
"nrf_bootloader_info.h": "c",
"ble_cmd_process_service.h": "c",
"storage_service.h": "c",
"board_ssd1306_interface.h": "c"
},
"files.encoding": "gbk"
}

356
app/app.uvoptx
View File

@ -386,8 +386,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\heart_wave_sample_service.c</PathWithFileName>
<FilenameWithoutPath>heart_wave_sample_service.c</FilenameWithoutPath>
<PathWithFileName>.\src\one_conduction_main.c</PathWithFileName>
<FilenameWithoutPath>one_conduction_main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -398,8 +398,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\app_event_distribute.c</PathWithFileName>
<FilenameWithoutPath>app_event_distribute.c</FilenameWithoutPath>
<PathWithFileName>.\src\main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -410,8 +410,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\m24m02\m24m02.c</PathWithFileName>
<FilenameWithoutPath>m24m02.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_beep_ctrl.c</PathWithFileName>
<FilenameWithoutPath>board_beep_ctrl.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -422,8 +422,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\ssd1306\driver_ssd1306.c</PathWithFileName>
<FilenameWithoutPath>driver_ssd1306.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_adc_module_ctrl.c</PathWithFileName>
<FilenameWithoutPath>board_adc_module_ctrl.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -434,8 +434,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\ssd1306\driver_ssd1306_basic.c</PathWithFileName>
<FilenameWithoutPath>driver_ssd1306_basic.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_battery_state.c</PathWithFileName>
<FilenameWithoutPath>board_battery_state.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -446,8 +446,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\ssd1306\fontlib.c</PathWithFileName>
<FilenameWithoutPath>fontlib.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_ecg_sensor.c</PathWithFileName>
<FilenameWithoutPath>board_ecg_sensor.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -458,8 +458,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\ssd1306\wave_drawer.c</PathWithFileName>
<FilenameWithoutPath>wave_drawer.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_light_ctrl.c</PathWithFileName>
<FilenameWithoutPath>board_light_ctrl.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -470,8 +470,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\ble_cmd_process_service.c</PathWithFileName>
<FilenameWithoutPath>ble_cmd_process_service.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_ssd1306_interface.c</PathWithFileName>
<FilenameWithoutPath>board_ssd1306_interface.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -482,8 +482,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\device_controler.c</PathWithFileName>
<FilenameWithoutPath>device_controler.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_eeprom_driver.c</PathWithFileName>
<FilenameWithoutPath>board_eeprom_driver.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -494,8 +494,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\device_state.c</PathWithFileName>
<FilenameWithoutPath>device_state.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\board_power_mgr.c</PathWithFileName>
<FilenameWithoutPath>board_power_mgr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -506,8 +506,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\display_manager.c</PathWithFileName>
<FilenameWithoutPath>display_manager.c</FilenameWithoutPath>
<PathWithFileName>.\src\basic_service\device_state.c</PathWithFileName>
<FilenameWithoutPath>device_state.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -518,8 +518,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\one_conduction_main.c</PathWithFileName>
<FilenameWithoutPath>one_conduction_main.c</FilenameWithoutPath>
<PathWithFileName>.\src\basic_service\device_version_info_mgr.c</PathWithFileName>
<FilenameWithoutPath>device_version_info_mgr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -530,8 +530,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\sample_data_manager.c</PathWithFileName>
<FilenameWithoutPath>sample_data_manager.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\ssd1306\driver_ssd1306.c</PathWithFileName>
<FilenameWithoutPath>driver_ssd1306.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -542,8 +542,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\zeeprom_fs.c</PathWithFileName>
<FilenameWithoutPath>zeeprom_fs.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\ssd1306\driver_ssd1306_basic.c</PathWithFileName>
<FilenameWithoutPath>driver_ssd1306_basic.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -554,8 +554,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\device_version_info_mgr.c</PathWithFileName>
<FilenameWithoutPath>device_version_info_mgr.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\ssd1306\fontlib.c</PathWithFileName>
<FilenameWithoutPath>fontlib.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -566,8 +566,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\main.c</PathWithFileName>
<FilenameWithoutPath>main.c</FilenameWithoutPath>
<PathWithFileName>.\src\board\ssd1306\wave_drawer.c</PathWithFileName>
<FilenameWithoutPath>wave_drawer.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -578,8 +578,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_beep_ctrl.c</PathWithFileName>
<FilenameWithoutPath>board_beep_ctrl.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\ble_cmd_processer\ble_cmd_process_service.c</PathWithFileName>
<FilenameWithoutPath>ble_cmd_process_service.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -590,8 +590,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_adc_module_ctrl.c</PathWithFileName>
<FilenameWithoutPath>board_adc_module_ctrl.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\display_mgr\display_manager.c</PathWithFileName>
<FilenameWithoutPath>display_manager.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -602,8 +602,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_battery_state.c</PathWithFileName>
<FilenameWithoutPath>board_battery_state.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\heart_wave_sample_service\heart_ware_sample_data_mgr.c</PathWithFileName>
<FilenameWithoutPath>heart_ware_sample_data_mgr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -614,8 +614,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_ecg_sensor.c</PathWithFileName>
<FilenameWithoutPath>board_ecg_sensor.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\heart_wave_sample_service\heart_wave_sample_data_pre_process.c</PathWithFileName>
<FilenameWithoutPath>heart_wave_sample_data_pre_process.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -626,8 +626,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_light_ctrl.c</PathWithFileName>
<FilenameWithoutPath>board_light_ctrl.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\heart_wave_sample_service\heart_wave_sample_service.c</PathWithFileName>
<FilenameWithoutPath>heart_wave_sample_service.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -638,8 +638,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\FIR.c</PathWithFileName>
<FilenameWithoutPath>FIR.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\storage\sample_data_manager.c</PathWithFileName>
<FilenameWithoutPath>sample_data_manager.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -650,8 +650,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\HC_Chen_detect.c</PathWithFileName>
<FilenameWithoutPath>HC_Chen_detect.c</FilenameWithoutPath>
<PathWithFileName>.\src\service\storage\zeeprom_fs.c</PathWithFileName>
<FilenameWithoutPath>zeeprom_fs.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -662,104 +662,8 @@
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\So_Chen_detect.c</PathWithFileName>
<FilenameWithoutPath>So_Chen_detect.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>26</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\adaptive_algorithm.c</PathWithFileName>
<FilenameWithoutPath>adaptive_algorithm.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>27</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\Pan_Tompkins_detect.c</PathWithFileName>
<FilenameWithoutPath>Pan_Tompkins_detect.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>28</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\basic\qrs_time_domain_zh.c</PathWithFileName>
<FilenameWithoutPath>qrs_time_domain_zh.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_ssd1306_interface.c</PathWithFileName>
<FilenameWithoutPath>board_ssd1306_interface.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>30</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_eeprom_driver.c</PathWithFileName>
<FilenameWithoutPath>board_eeprom_driver.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>31</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\board\board_power_mgr.c</PathWithFileName>
<FilenameWithoutPath>board_power_mgr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\heart_ware_sample_data_mgr.c</PathWithFileName>
<FilenameWithoutPath>heart_ware_sample_data_mgr.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<bDave2>0</bDave2>
<PathWithFileName>.\src\heart_wave_sample_data_pre_process.c</PathWithFileName>
<FilenameWithoutPath>heart_wave_sample_data_pre_process.c</FilenameWithoutPath>
<PathWithFileName>.\src\basic_service\app_event_distribute.c</PathWithFileName>
<FilenameWithoutPath>app_event_distribute.c</FilenameWithoutPath>
<RteFlg>0</RteFlg>
<bShared>0</bShared>
</File>
@ -773,7 +677,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>34</FileNumber>
<FileNumber>26</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -793,7 +697,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>35</FileNumber>
<FileNumber>27</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -805,7 +709,7 @@
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>36</FileNumber>
<FileNumber>28</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -825,7 +729,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>37</FileNumber>
<FileNumber>29</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -845,7 +749,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>38</FileNumber>
<FileNumber>30</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -857,7 +761,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>39</FileNumber>
<FileNumber>31</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -869,7 +773,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>40</FileNumber>
<FileNumber>32</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -881,7 +785,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>41</FileNumber>
<FileNumber>33</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -893,7 +797,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>42</FileNumber>
<FileNumber>34</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -905,7 +809,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>43</FileNumber>
<FileNumber>35</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -917,7 +821,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>44</FileNumber>
<FileNumber>36</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -929,7 +833,7 @@
</File>
<File>
<GroupNumber>5</GroupNumber>
<FileNumber>45</FileNumber>
<FileNumber>37</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -949,7 +853,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>6</GroupNumber>
<FileNumber>46</FileNumber>
<FileNumber>38</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -963,13 +867,13 @@
<Group>
<GroupName>nRF_Drivers</GroupName>
<tvExp>0</tvExp>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<RteFlg>0</RteFlg>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>47</FileNumber>
<FileNumber>39</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -981,7 +885,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>48</FileNumber>
<FileNumber>40</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -993,7 +897,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>49</FileNumber>
<FileNumber>41</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1005,7 +909,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>50</FileNumber>
<FileNumber>42</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1017,7 +921,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>51</FileNumber>
<FileNumber>43</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1029,7 +933,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>52</FileNumber>
<FileNumber>44</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1041,7 +945,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>53</FileNumber>
<FileNumber>45</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1053,7 +957,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>54</FileNumber>
<FileNumber>46</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1065,7 +969,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>55</FileNumber>
<FileNumber>47</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1077,7 +981,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>56</FileNumber>
<FileNumber>48</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1089,7 +993,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>57</FileNumber>
<FileNumber>49</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1101,7 +1005,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>58</FileNumber>
<FileNumber>50</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1113,7 +1017,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>59</FileNumber>
<FileNumber>51</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1125,7 +1029,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>60</FileNumber>
<FileNumber>52</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1137,7 +1041,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>61</FileNumber>
<FileNumber>53</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1149,7 +1053,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>62</FileNumber>
<FileNumber>54</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1161,7 +1065,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>63</FileNumber>
<FileNumber>55</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1173,7 +1077,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>64</FileNumber>
<FileNumber>56</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1185,7 +1089,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>65</FileNumber>
<FileNumber>57</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1197,7 +1101,7 @@
</File>
<File>
<GroupNumber>7</GroupNumber>
<FileNumber>66</FileNumber>
<FileNumber>58</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1217,7 +1121,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>67</FileNumber>
<FileNumber>59</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1229,7 +1133,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>68</FileNumber>
<FileNumber>60</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1241,7 +1145,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>69</FileNumber>
<FileNumber>61</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1253,7 +1157,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>70</FileNumber>
<FileNumber>62</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1265,7 +1169,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>71</FileNumber>
<FileNumber>63</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1277,7 +1181,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>72</FileNumber>
<FileNumber>64</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1289,7 +1193,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>73</FileNumber>
<FileNumber>65</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1301,7 +1205,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>74</FileNumber>
<FileNumber>66</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1313,7 +1217,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>75</FileNumber>
<FileNumber>67</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1325,7 +1229,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>76</FileNumber>
<FileNumber>68</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1337,7 +1241,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>77</FileNumber>
<FileNumber>69</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1349,7 +1253,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>78</FileNumber>
<FileNumber>70</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1361,7 +1265,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>79</FileNumber>
<FileNumber>71</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1373,7 +1277,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>80</FileNumber>
<FileNumber>72</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1385,7 +1289,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>81</FileNumber>
<FileNumber>73</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1397,7 +1301,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>82</FileNumber>
<FileNumber>74</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1409,7 +1313,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>83</FileNumber>
<FileNumber>75</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1421,7 +1325,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>84</FileNumber>
<FileNumber>76</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1433,7 +1337,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>85</FileNumber>
<FileNumber>77</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1445,7 +1349,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>86</FileNumber>
<FileNumber>78</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1457,7 +1361,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>87</FileNumber>
<FileNumber>79</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1469,7 +1373,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>88</FileNumber>
<FileNumber>80</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1481,7 +1385,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>89</FileNumber>
<FileNumber>81</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1493,7 +1397,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>90</FileNumber>
<FileNumber>82</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1505,7 +1409,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>91</FileNumber>
<FileNumber>83</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1517,7 +1421,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>92</FileNumber>
<FileNumber>84</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1529,7 +1433,7 @@
</File>
<File>
<GroupNumber>8</GroupNumber>
<FileNumber>93</FileNumber>
<FileNumber>85</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1549,7 +1453,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>94</FileNumber>
<FileNumber>86</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1561,7 +1465,7 @@
</File>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>95</FileNumber>
<FileNumber>87</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1573,7 +1477,7 @@
</File>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>96</FileNumber>
<FileNumber>88</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1585,7 +1489,7 @@
</File>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>97</FileNumber>
<FileNumber>89</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1597,7 +1501,7 @@
</File>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>98</FileNumber>
<FileNumber>90</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1609,7 +1513,7 @@
</File>
<File>
<GroupNumber>9</GroupNumber>
<FileNumber>99</FileNumber>
<FileNumber>91</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1629,7 +1533,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>10</GroupNumber>
<FileNumber>100</FileNumber>
<FileNumber>92</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1641,7 +1545,7 @@
</File>
<File>
<GroupNumber>10</GroupNumber>
<FileNumber>101</FileNumber>
<FileNumber>93</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1653,7 +1557,7 @@
</File>
<File>
<GroupNumber>10</GroupNumber>
<FileNumber>102</FileNumber>
<FileNumber>94</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1673,7 +1577,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>11</GroupNumber>
<FileNumber>103</FileNumber>
<FileNumber>95</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1685,7 +1589,7 @@
</File>
<File>
<GroupNumber>11</GroupNumber>
<FileNumber>104</FileNumber>
<FileNumber>96</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1697,7 +1601,7 @@
</File>
<File>
<GroupNumber>11</GroupNumber>
<FileNumber>105</FileNumber>
<FileNumber>97</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1717,7 +1621,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>12</GroupNumber>
<FileNumber>106</FileNumber>
<FileNumber>98</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1729,7 +1633,7 @@
</File>
<File>
<GroupNumber>12</GroupNumber>
<FileNumber>107</FileNumber>
<FileNumber>99</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1741,7 +1645,7 @@
</File>
<File>
<GroupNumber>12</GroupNumber>
<FileNumber>108</FileNumber>
<FileNumber>100</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1761,7 +1665,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>13</GroupNumber>
<FileNumber>109</FileNumber>
<FileNumber>101</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1773,7 +1677,7 @@
</File>
<File>
<GroupNumber>13</GroupNumber>
<FileNumber>110</FileNumber>
<FileNumber>102</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1793,7 +1697,7 @@
<RteFlg>0</RteFlg>
<File>
<GroupNumber>14</GroupNumber>
<FileNumber>111</FileNumber>
<FileNumber>103</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1805,7 +1709,7 @@
</File>
<File>
<GroupNumber>14</GroupNumber>
<FileNumber>112</FileNumber>
<FileNumber>104</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1817,7 +1721,7 @@
</File>
<File>
<GroupNumber>14</GroupNumber>
<FileNumber>113</FileNumber>
<FileNumber>105</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
@ -1829,7 +1733,7 @@
</File>
<File>
<GroupNumber>14</GroupNumber>
<FileNumber>114</FileNumber>
<FileNumber>106</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>

272
app/app.uvprojx
File diff suppressed because it is too large
View File

2
app/config/sdk_config.h
View File

@ -7719,7 +7719,7 @@
#ifndef NRF_FPRINTF_DOUBLE_ENABLED
#define NRF_FPRINTF_DOUBLE_ENABLED 0
#define NRF_FPRINTF_DOUBLE_ENABLED 1
#endif
// </h>

1
app/src/app_event.h
View File

@ -1 +0,0 @@
#include "device_state.h"

14
app/src/board/board.h → app/src/aproject_config/config.h
View File

@ -1,5 +1,19 @@
#pragma once
/***********************************************************************************************************************
* É豸ÐÅÏ¢ÅäÖà *
***********************************************************************************************************************/
#define CATEGORY "M1001" // µ¥µ¼Áª
#define MANUFACTURER_NAME "iflytop"
#define FIRMWARE_VERSION (10)
#define BLESTACK_VERSION 1
#define BOOTLOADER_VERSION 1
#define HARDWARE_VERSION (1)
#define APP_COMPANY_IDENTIFIER 0xFFFF
/*******************************************************************************
* BEEP *
*******************************************************************************/

14
app/src/basic/device_version_info_mgr.h
View File

@ -1,14 +0,0 @@
#pragma once
#include "znordic.h"
typedef struct {
uint8_t sn[14];
} sn_t;
void device_info_read_sn(sn_t *sn);
const char *device_info_read_sn_str();
uint16_t device_info_read_blestack_version(void);
uint16_t device_info_read_bootloader_version(void);
uint16_t device_info_read_firmware_version(void);
uint16_t device_info_read_hardware_version(void);

0
app/src/basic/m24m02/m24m02.c
View File

0
app/src/basic/m24m02/m24m02.h
View File

12
app/src/basic/version.h
View File

@ -1,12 +0,0 @@
#pragma once
#define CATEGORY "M1001" // µ¥µ¼Áª
#define MANUFACTURER_NAME "iflytop"
#define FIRMWARE_VERSION (10)
#define BLESTACK_VERSION 1
#define BOOTLOADER_VERSION 1
#define HARDWARE_VERSION (1)
// https://www.bluetooth.com/specifications/assigned-numbers/
// #define APP_COMPANY_IDENTIFIER 0x0059 /**< Company identifier for Nordic Semiconductor ASA. as per www.bluetooth.org. */
#define APP_COMPANY_IDENTIFIER 0xFFFF /**< Company identifier for Nordic Semiconductor ASA. as per www.bluetooth.org. */

16
app/src/device_state.h → app/src/basic_service/app_event.h
View File

@ -2,7 +2,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "board/board.h"
#include "aproject_config/config.h"
typedef enum {
kplod_connected_event = 0, // 导联连接事件
kplod_disconnected_event, // 导联断开事件
@ -74,17 +74,3 @@ static const char* device_state_to_str(device_state_t ds) {
}
}
void app_event_process_cb(void* p_event_data, uint16_t event_size);
void ds_change_to_state(device_state_t state);
uint32_t ds_cur_state_haspassed_ms();
device_state_t ds_now_state();
typedef struct {
bool is_over30s;
} sample_capture_state_t;
sample_capture_state_t* sample_capture_state_get();
void sample_capture_state_reset();
void sample_capture_state_set_is_over30s(bool over30s);

4
app/src/app_event_distribute.c → app/src/basic_service/app_event_distribute.c
View File

@ -1,6 +1,6 @@
#include "app_event_distribute.h"
#include "basic_service/app_event_distribute.h"
#include "app_event.h"
#include "basic_service/app_event.h"
#include "app_scheduler.h"
static AppEventListener m_listener[10];

2
app/src/app_event_distribute.h → app/src/basic_service/app_event_distribute.h
View File

@ -2,7 +2,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "app_event.h"
#include "basic_service/app_event.h"
typedef void (*app_event_listener_t)(void* p_event_data, uint16_t event_size);

0
app/src/device_state.c → app/src/basic_service/device_state.c
View File

18
app/src/basic_service/device_state.h
View File

@ -0,0 +1,18 @@
#pragma once
#include <stdbool.h>
#include <stdint.h>
#include "aproject_config/config.h"
#include "basic_service/app_event.h"
void ds_change_to_state(device_state_t state);
uint32_t ds_cur_state_haspassed_ms();
device_state_t ds_now_state();
typedef struct {
bool is_over30s;
} sample_capture_state_t;
sample_capture_state_t* sample_capture_state_get();
void sample_capture_state_reset();
void sample_capture_state_set_is_over30s(bool over30s);

3
app/src/basic/device_version_info_mgr.c → app/src/basic_service/device_version_info_mgr.c
View File

@ -1,9 +1,8 @@
#include "device_version_info_mgr.h"
#include "board/board.h"
#include "aproject_config/config.h"
#include "zble_module.h"
//
#include "version.h"
#include "znordic.h"
void device_info_read_sn(sn_t *sn) {
uint32_t lot = NRF_UICR->CUSTOMER[0];

16
app/src/basic_service/device_version_info_mgr.h
View File

@ -0,0 +1,16 @@
#pragma once
#include "znordic.h"
typedef struct {
uint8_t sn[14];
} sn_t;
void device_info_read_sn(sn_t *sn);
const char *device_info_read_sn_str();
uint16_t device_info_read_blestack_version(void);
uint16_t device_info_read_bootloader_version(void);
uint16_t device_info_read_firmware_version(void);
uint16_t device_info_read_hardware_version(void);

133
app/src/board/ads1291/ads1291.c
View File

@ -0,0 +1,133 @@
#include "ads1291.h"
#include "ads1291_type.h"
/** @addtogroup ADS1292R
* @{
*/
/* Private typedef -----------------------------------------------------------*/
typedef struct {
uint8_t id; /* id，ads1292r固定为0x73 ads1291 0x52 */
uint8_t cfg1; /* 设置寄存器 */
uint8_t cfg2; /* 设置寄存器 */
uint8_t loff; /* 导联 */
uint8_t ch1set; /* 通道一设置 */
uint8_t ch2set; /* 通道二设置 */
uint8_t rld_sens; /* 右腿驱动 */
uint8_t loff_sens; /* 导联 */
uint8_t loff_stat; /* 导联 */
uint8_t resp1; /* 呼吸 */
uint8_t resp2; /* 呼吸 */
uint8_t gpio; /* gpio1，2的控制 */
} ads1292r_regs_s;
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* 局部全局变量，包含ads1292寄存器默认值 */
static ads1292r_regs_s ads1292r_reg = {
/* 默认参数 */
0x73, /* 默认地址0x73 */
0x02, /* 连续转换，500sps采样率 */
0x80, /* 导联脱落比较器关，内部参考电压关，2.42v参考电压，晶振输出关，测试信号关，测试信号频率为0HZ */
0x10, /* 脱落比较器正端阈值为95%，负端为5%，引出模式电流大小6na，频率为0HZ */
0x00, /* 通道一关闭，6倍增益，正常电极输入 */
0x00, /* 通道二关闭，6倍增益，正常电极输入 */
0x00, /* 未启用 */
0x00, /* 未启用 */
0x00, /* fmod为clk四分频，其他未用 */
0x02, /* 呼吸相关配置 */
0x03, /* 呼吸相关配置 */
0x0c /* gpio1、2皆为输入模式 */
};
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/* 不必要，尽量不要对外开放以下函数，最好设置成static类型 */
/* ads1292r发送指令 */
uint8_t ads1292r_send_cmd(uint8_t cmd) {
uint8_t rx = 0;
ADS1292_CS_RESET(); /* 选中设备 */
port_delay_us(100);
rx = port_spi_transmit_receive(cmd);
port_delay_us(100);
ADS1292_CS_SET(); /* 释放设备 */
return rx;
}
/* ads1292r读写寄存器，自动根据指令类型区分读和写操作 */
uint8_t ads1292r_rw_reg(uint8_t cmd, uint8_t data) {
uint8_t rx = 0;
ADS1292_CS_RESET(); /* 选中设备 */
port_delay_us(1);
port_spi_transmit_receive(cmd); /* 发送读写指令 */
port_spi_transmit_receive(0X00); /* 只写一个数据 */
if ((cmd & ADS1292R_COMMAND_RREG) == ADS1292R_COMMAND_RREG) /* 判断指令类型 */
rx = port_spi_transmit_receive(0X00); /* 返回寄存器值 */
else
rx = port_spi_transmit_receive(data); /* 写入数值 */
port_delay_us(1);
ADS1292_CS_SET(); /* 释放设备 */
return rx;
}
/* 从指定寄存器开始读写一定数量的寄存器 */
void ads1292r_write_multiregs(uint8_t reg, uint8_t *ch, uint8_t size) {
uint8_t i;
ADS1292_CS_RESET(); /* 选中设备 */
port_delay_us(100);
port_spi_transmit_receive(ADS1292R_COMMAND_WREG | reg);
port_delay_us(100);
port_spi_transmit_receive(size - 1);
for (i = 0; i < size; i++) {
port_delay_us(100);
port_spi_transmit_receive(*ch);
ch++;
}
port_delay_us(100);
ADS1292_CS_SET();
}
/* 从指定寄存器开始读写一定数量的寄存器 */
void ads1292r_read_multiregs(uint8_t reg, uint8_t *ch, uint8_t size) {
uint8_t i;
ADS1292_CS_RESET(); /* 选中设备 */
port_delay_us(100);
port_spi_transmit_receive(ADS1292R_COMMAND_RREG | reg);
port_delay_us(100);
port_spi_transmit_receive(size - 1);
for (i = 0; i < size; i++) {
port_delay_us(100);
*ch = port_spi_transmit_receive(0);
ch++;
}
port_delay_us(100);
ADS1292_CS_SET();
}
uint8_t ads1292r_init(uint8_t timeout);
void ads1292r_normal_adc_start(void);
void ads1292r_test_adc_start(void);
void ads1292r_get_value(uint8_t *ad_buf);

28
app/src/board/ads1291/ads1291.h
View File

@ -0,0 +1,28 @@
#ifndef __ADS1292R_H
#define __ADS1292R_H
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
uint8_t ads1292r_init(uint8_t timeout);
/** @brief 开启双通道正常模式采样，用于心电采集
* @details 500sps，6倍增益，调用该函数后需调用读函数，读取ad数据
* @retval NONE
*/
void ads1292r_normal_adc_start(void);
/** @brief 开启双测试信号adc转换。
* @details 500sps，6倍增益，1HZ方波，调用该函数后需调用读函数，读取ad数据
* @retval NONE
*/
void ads1292r_test_adc_start(void);
void ads1292r_get_value(uint8_t *ad_buf);
#ifdef __cplusplus
}
#endif
#endif /* __ADS1292R_H */

330
app/src/board/ads1291/ads1291_type.h
View File

@ -0,0 +1,330 @@
/**
******************************************************************************
* @file : ads1291_typ.h
* @brief : ads1291相关数据类型定义
* @details : 寄存器标、命令表、
* @author :
* @date : 2020/9/2
* @version : V0.1
* @copyright : Copyright (C)
******************************************************************************
* @attention
* NONE
******************************************************************************
* @verbatim
* 修改历史:
* 1. 日期：2020/9/2
* 作者：Charmander
* 修改：
* @endverbatim
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __ADS1292_TYP_H
#define __ADS1292_TYP_H
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup ADS1291_TYP ADS1291 TYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @addtogroup ADS1291_TYP_Exported_types ADS1291 TYP Exported types
* @{
*/
/** @brief 寄存器地址枚举
* @details 11个寄存器
*/
typedef enum {
ADS1291_REG_ID = 0x00,
ADS1291_REG_CONFIG1 = 0x01,
ADS1291_REG_CONFIG2 = 0x02,
ADS1291_REG_LOFF = 0x03,
ADS1291_REG_CH1SET = 0x04,
ADS1291_REG_CH2SET = 0x05,
ADS1291_REG_RLDSENS = 0x06,
ADS1291_REG_LOFFSENS = 0x07,
ADS1291_REG_LOFFSTAT = 0x08,
ADS1291_REG_RESP1 = 0x09,
ADS1291_REG_RESP2 = 0x0A,
ADS1291_REG_GPIO = 0x0B
} ADS1291_REG_E;
/**
* @}
*/
/** @addtogroup ADS1291_TYP_Exported_constants ADS1291 TYP Exported constants
* @brief 一下内容也可以全部由位域+枚举实现，考虑到不是所有编译器都支持，
* 采用宏+掩码方式实现。
* @{
*/
/* Exported constants --------------------------------------------------------*/
#define ADS1291_REG_SIZE_MAX 12 /* ADS1291寄存器数量 */
/** @addtogroup ADS1291_TYP_REG_CONTENT ADS1291 TYP Exported content
* @brief 各寄存器内容
* @{
*/
/* 芯片ID */
#define ADS1291_ID 0x73
/* 属于ADS1291_REG_CONFIG1的寄存器设置 */
#define ADS1291_SINGLE_SHOT_OFF 0 /* 连续转换模式,默认 */
#define ADS1291_SINGLE_SHOT_ON 1 /* 单次转换模式 */
/* 采样率，该模块采用fclk为512k，0分频模式，其他配置下采样率会改变 */
#define ADS1291_OVERSAMPLING_125SPS 0
#define ADS1291_OVERSAMPLING_250SPS 1
#define ADS1291_OVERSAMPLING_500SPS 2 /* 默认 */
#define ADS1291_OVERSAMPLING_1000SPS 3
#define ADS1291_OVERSAMPLING_2000SPS 4
#define ADS1291_OVERSAMPLING_4000SPS 5
#define ADS1291_OVERSAMPLING_8000SPS 6
#define ADS1291_OVERSAMPLING_NONESPS 7
/* 属于ADS1291_REG_CONFIG2的寄存器设置 */
#define ADS1291_PDB_LOFF_COMP_OFF 0 /* 导联脱落比较器关，默认 */
#define ADS1291_PDB_LOFF_COMP_ON 1 /* 导联脱落比较器开 */
#define ADS1291_PDB_REFBUF_OFF 0 /* 内部参考电压关，默认 */
#define ADS1291_PDB_REFBUF_ON 1 /* 内部参考电压开 */
#define ADS1291_VREF_2420MV 0 /* 选择参考电压为2.42v，默认 */
#define ADS1291_VREF_4033MV 1 /* 选择参考电压为4.033v */
#define ADS1291_CLK_OUTPUT_OFF 0 /* 时钟输出关，默认 */
#define ADS1291_CLK_OUTPUT_ON 1 /* 时钟输出开 */
#define ADS1291_INT_TEST_OFF 0 /* 内部测试电压关，默认 */
#define ADS1291_INT_TEST_ON 1 /* 内部测试电压开 */
#define ADS1291_INT_FREQ_DC 0 /* 直流，默认 */
#define ADS1291_INT_FREQ_AC 1 /* 1HZ方波 */
/* 属于ADS1291_REG_LOFF的寄存器设置 */
/* 属于ADS1291_REG_CH1SET，与ADS1291_REG_CH2SET的寄存器设置 */
#define ADS1291_CHx_OFF 1 /* 禁止使用通道一 */
#define ADS1291_CHx_ON 0 /* 使用通道一，默认 */
#define ADS1291_GAIN_6 0 /* 使用通道一6倍增益，默认 */
#define ADS1291_GAIN_1 1 /* 使用通道一1倍增益 */
#define ADS1291_GAIN_2 2 /* 使用通道一2倍增益 */
#define ADS1291_GAIN_3 3 /* 使用通道一3倍增益 */
#define ADS1291_GAIN_4 4 /* 使用通道一4倍增益 */
#define ADS1291_GAIN_8 5 /* 使用通道一8倍增益 */
#define ADS1291_GAIN_12 6 /* 使用通道一12倍增益 */
/* 选择通道一的输入 */
#define ADS1291_CHx_INPUT_NORMAL 0 /* 正常电极输入，默认 */
#define ADS1291_CHx_INPUT_SHORTED 1 /* 短路，测偏执用 */
#define ADS1291_CHx_INPUT_RLD 2 /* 右腿驱动 */
/* For channel 1, (MVDDP – MVDDN) is [0.5(AVDD + AVSS)]; for channel 2, (MVDDP – MVDDN) is DVDD / 4. */
/* For channel 2,VDD / 2 for supply measurement */
#define ADS1291_CHx_INPUT_MVDD 3
#define ADS1291_CHx_INPUT_TEMP 4 /* 板载温度 */
#define ADS1291_CHx_INPUT_TEST 5 /* 内部测试信号 */
#define ADS1291_CHx_INPUT_RLDDRP 6
#define ADS1291_CHx_INPUT_RLDDRM 7
#define ADS1291_CHx_INPUT_RLDDRPM 8
#define ADS1291_CHx_INPUT_ROUTE 9 /* 连接到通道三 */
#define ADS1291_CHx_INPUT_RESERVED 10 /* 预留 */
/* 属于ADS1291_REG_RLDSENS的寄存器设置 */
#define ADS1291_CHOP_FREQ_DIV4 3 /* PGA斩波频率未fMOD/4 */
#define ADS1291_PDB_RLD_OFF 0 /* 右腿驱动电源关，默认 */
#define ADS1291_PDB_RLD_ON 1 /* 右腿驱动电源开 */
#define ADS1291_PDB_RLD_SENSE_OFF 0 /* 右腿驱动导联脱落检测关，默认 */
#define ADS1291_PDB_RLD_SENSE_ON 1 /* 右腿驱动导联脱落检测开 */
#define ADS1291_RLD2N_OFF 0 /* 通道二负极为右腿输入关，默认 */
#define ADS1291_RLD2N_ON 1 /* 通道二负极为右腿输入开 */
#define ADS1291_RLD2P_OFF 0 /* 通道二正极为右腿输入关，默认 */
#define ADS1291_RLD2P_ON 1 /* 通道二正极为右腿输入开 */
#define ADS1291_RLD1N_OFF 0 /* 通道一负极为右腿输入关，默认 */
#define ADS1291_RLD1N_ON 1 /* 通道一负极为右腿输入开 */
#define ADS1291_RLD1P_OFF 0 /* 通道一正极为右腿输入关，默认 */
#define ADS1291_RLD1P_ON 1 /* 通道一正极为右腿输入开 */
/* 属于ADS1291_REG_LOFFSENS的寄存器设置 */
#define ADS1291_FLIP2_OFF 0 /* 导联脱落检测通道二电流方向关，默认 */
#define ADS1291_FLIP2_ON 1 /* 导联脱落检测通道二电流方向开 */
#define ADS1291_FLIP1_OFF 0 /* 导联脱落检测通道一电流方向关，默认 */
#define ADS1291_FLIP1_ON 1 /* 导联脱落检测通道一电流方向开 */
#define ADS1291_LOFF2N_OFF 0 /* 通道二负极导联脱落检测关，默认 */
#define ADS1291_LOFF2N_ON 1 /* 通道二负极导联脱落检测开 */
#define ADS1291_LOFF2P_OFF 0 /* 通道二正极导联脱落检测关，默认 */
#define ADS1291_LOFF2P_ON 1 /* 通道二正极导联脱落检测开 */
#define ADS1291_LOFF1N_OFF 0 /* 通道一负极导联脱落检测关，默认 */
#define ADS1291_LOFF1N_ON 1 /* 通道一负极导联脱落检测开 */
#define ADS1291_LOFF1P_OFF 0 /* 通道一正极导联脱落检测关，默认 */
#define ADS1291_LOFF1P_ON 1 /* 通道一正极导联脱落检测开 */
/* 属于ADS1291_REG_LOFFSTAT的寄存器设置 */
#define ADS1291_CLK_DIV4 0 /* 0 = fMOD = fCLK / 4 (default, use when fCLK = 512 kHz) */
#define ADS1291_CLK_DIV16 1 /* 1 = fMOD = fCLK / 16 (use when fCLK = 2.048 MHz) */
/* 属于ADS1291_REG_RESP1的寄存器设置 */
#define ADS1291_DEMOD_EN1_OFF 0 /* 通道一上的呼吸解调电路关，默认 */
#define ADS1291_DEMOD_EN1_ON 1 /* 通道一上的呼吸解调电路开 */
#define ADS1291_DEMOD_EN_OFF 0 /* 通道一上的呼吸调制电路关，默认 */
#define ADS1291_DEMOD_EN_ON 1 /* 通道一上的呼吸调制电路开 */
#define ADS1291_RESPPH_0 0 /* 解调信号相位偏移0，默认 */
#define ADS1291_RESPPH_135 0x0c /* 解调信号相位偏移135度 */
#define ADS1291_RESP_CTRL_INT 0 /* 内部呼吸内部时钟，默认 */
#define ADS1291_RESP_CTRL_EXT 1 /* 内部呼吸外部时钟 */
/* 属于ADS1291_REG_RESP2的寄存器设置 */
#define ADS1291_CALIB_ON_OFF 0 /* 校准关，默认 */
#define ADS1291_CALIB_ON_ON 1 /* 校准开 */
#define ADS1291_RESP_FREQ_36 0 /* 通道一上的呼吸调制电路关，默认 */
#define ADS1291_RESP_FREQ_64 1 /* 通道一上的呼吸调制电路开 */
#define ADS1291_RLDREF_EXT 0 /* 右腿驱动参考电压选择外部反馈，默认 */
#define ADS1291_RLDREF_INT 1 /* 右腿驱动参考电压选择内部信号 */
/* 属于ADS1291_REG_GPIO的寄存器设置 */
/**
* @}
*/
/** @addtogroup ADS1291_TYP_REG_MASK ADS1291 TYP Reg Mask
* @brief 各寄存器值与位置掩码，被ADS1291_GET_BITS与ADS1291_SET_BITS函数调用
* @{
*/
#define ADS1291_ID_POS 0
#define ADS1291_ID_MASK 0xFF
#define ADS1291_SINGLE_SHOT_POS 7
#define ADS1291_SINGLE_SHOT_MASK 0x80
#define ADS1291_DR_POS 0
#define ADS1291_DR_MASK 0x07
#define ADS1291_PDB_LOFF_COMP_POS 6
#define ADS1291_PDB_LOFF_COMP_MASK 0x40
#define ADS1291_PDB_REFBUF_POS 5
#define ADS1291_PDB_REFBUF_MASK 0x20
#define ADS1291_VREF_4V_POS 4
#define ADS1291_VREF_4V_MASK 0x10
#define ADS1291_CLK_EN_POS 3
#define ADS1291_CLK_EN_MASK 0x80
#define ADS1291_INT_TEST_POS 1
#define ADS1291_INT_TEST_MASK 0x02
#define ADS1291_INT_FREQ_POS 0
#define ADS1291_INT_FREQ_MASK 0x01
#define ADS1291_PDx_POS 7
#define ADS1291_PDx_MASK 0x80
#define ADS1291_GAINx_POS 4
#define ADS1291_GAINx_MASK 0x70
#define ADS1291_MUXx_POS 0
#define ADS1291_MUXx_MASK 0x0F
#define ADS1291_CHOP_POS 6
#define ADS1291_CHOP_MASK 0xC0
#define ADS1291_PDB_RLD_POS 5
#define ADS1291_PDB_RLD_MASK 0x20
#define ADS1291_RLD_LOFF_SENSE_POS 4
#define ADS1291_RLD_LOFF_SENSE_MASK 0x10
#define ADS1291_RLD2N_POS 3
#define ADS1291_RLD2N_MASK 0x08
#define ADS1291_RLD2P_POS 2
#define ADS1291_RLD2P_MASK 0x04
#define ADS1291_RLD1N_POS 1
#define ADS1291_RLD1N_MASK 0x02
#define ADS1291_RLD1P_POS 0
#define ADS1291_RLD1P_MASK 0x01
#define ADS1291_FLIP2_POS 5
#define ADS1291_FLIP2_MASK 0x20
#define ADS1291_FLIP1_POS 4
#define ADS1291_FLIP1_MASK 0x10
#define ADS1291_LOFF2N_POS 3
#define ADS1291_LOFF2N_MASK 0x08
#define ADS1291_LOFF2P_POS 2
#define ADS1291_LOFF2P_MASK 0x04
#define ADS1291_LOFFN_POS 1
#define ADS1291_LOFF1N_MASK 0x02
#define ADS1291_LOFF1P_POS 0
#define ADS1291_LOFF1P_MASK 0x01
#define ADS1291_CLK_DIV_POS 6
#define ADS1291_CLK_DIV_MASK 0x40
#define ADS1291_RESP_DEMOD_EN1_POS 7
#define ADS1291_RESP_DEMOD_EN1_MASK 0x80
#define ADS1291_RESP_MOD_EN_POS 6
#define ADS1291_RESP_MOD_EN_MASK 0x40
#define ADS1291_RESP_PH_POS 2
#define ADS1291_RESP_PH_MASK 0x3c
#define ADS1291_RESP_CTRL_POS 0
#define ADS1291_RESP_CTRL_MASK 0x01
#define ADS1291_CALIB_ON_POS 7
#define ADS1291_CALIB_ON_MASK 0x80
#define ADS1291_RESP_FREQ_POS 2
#define ADS1291_RESP_FREQ_MASK 0x04
#define ADS1291_RLDREF_INT_POS 1
#define ADS1291_RLDREF_INT_MASK 0x02
/**
* @}
*/
/** @addtogroup ADS1291_TYP_COMMAND ADS1291 TYP COMMAND
* @brief 命令
* @{
*/
/* System Commands */
#define ADS1291_COMMAND_WAKEUP 0x02
#define ADS1291_COMMAND_STANDBY 0x04
#define ADS1291_COMMAND_RESET 0x06
#define ADS1291_COMMAND_START 0x08
#define ADS1291_COMMAND_STOP 0x0A
#define ADS1291_COMMAND_OFFSETCAL 0x1A
/* Data Read Commands */
#define ADS1291_COMMAND_RDATAC 0x10
#define ADS1291_COMMAND_SDATAC 0x11
#define ADS1291_COMMAND_RDATA 0x12
/* Register Read Commands，最后5位为读写的地址 */
#define ADS1291_COMMAND_RREG 0x20
#define ADS1291_COMMAND_WREG 0x40
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @brief 读取ADS1291的指定寄存器的指定位
* @details
* @param[in] bitname 位名字
* @param[in] reg 寄存器名字
* @retval 该位的值
*/
#define ADS1291_GET_BITS(bitname, reg) ((reg & bitname##_MASK) >> bitname##_POS)
/** @brief 设置ADS1291的指定寄存器的指定位
* @details
* @param[in] reg 寄存器名字
* @param[in] bitname 位名字
* @param[in] val 要设置的值
* @retval NONE
*/
#define ADS1291_SET_BITS(reg, bitname, val) ((reg & ~bitname##_MASK) | ((val << bitname##_POS) & bitname##_MASK))
/* Exported functions --------------------------------------------------------*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __ADS1292_TYP_H */

337
app/src/board/ads1291/ads1292r_typ.h
View File

@ -1,337 +0,0 @@
/**
******************************************************************************
* @file : ads1292r_typ.h
* @brief : ads1292r相关数据类型定义
* @details : 寄存器标、命令表、
* @author :
* @date : 2020/9/2
* @version : V0.1
* @copyright : Copyright (C)
******************************************************************************
* @attention
* NONE
******************************************************************************
* @verbatim
* 修改历史:
* 1. 日期：2020/9/2
* 作者：Charmander
* 修改：
* @endverbatim
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __ADS1292_TYP_H
#define __ADS1292_TYP_H
#ifdef __cplusplus
extern "C" {
#endif
/** @defgroup ADS1292R_TYP ADS1292R TYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @addtogroup ADS1292R_TYP_Exported_types ADS1292R TYP Exported types
* @{
*/
/** @brief 寄存器地址枚举
* @details 11个寄存器
*/
typedef enum
{
ADS1292R_REG_ID = 0x00 ,
ADS1292R_REG_CONFIG1 = 0x01 ,
ADS1292R_REG_CONFIG2 = 0x02 ,
ADS1292R_REG_LOFF = 0x03 ,
ADS1292R_REG_CH1SET = 0x04 ,
ADS1292R_REG_CH2SET = 0x05 ,
ADS1292R_REG_RLDSENS = 0x06 ,
ADS1292R_REG_LOFFSENS = 0x07 ,
ADS1292R_REG_LOFFSTAT = 0x08 ,
ADS1292R_REG_RESP1 = 0x09 ,
ADS1292R_REG_RESP2 = 0x0A ,
ADS1292R_REG_GPIO = 0x0B
}ADS1292R_REG_E ;
/**
* @}
*/
/** @addtogroup ADS1292R_TYP_Exported_constants ADS1292R TYP Exported constants
* @brief 一下内容也可以全部由位域+枚举实现，考虑到不是所有编译器都支持，
* 采用宏+掩码方式实现。
* @{
*/
/* Exported constants --------------------------------------------------------*/
#define ADS1292R_REG_SIZE_MAX 12 /* ADS1292R寄存器数量 */
/** @addtogroup ADS1292R_TYP_REG_CONTENT ADS1292R TYP Exported content
* @brief 各寄存器内容
* @{
*/
/* 芯片ID */
#define ADS1292R_ID 0x73
/* 属于ADS1292R_REG_CONFIG1的寄存器设置 */
#define ADS1292R_SINGLE_SHOT_OFF 0 /* 连续转换模式,默认 */
#define ADS1292R_SINGLE_SHOT_ON 1 /* 单次转换模式 */
/* 采样率，该模块采用fclk为512k，0分频模式，其他配置下采样率会改变 */
#define ADS1292R_OVERSAMPLING_125SPS 0
#define ADS1292R_OVERSAMPLING_250SPS 1
#define ADS1292R_OVERSAMPLING_500SPS 2 /* 默认 */
#define ADS1292R_OVERSAMPLING_1000SPS 3
#define ADS1292R_OVERSAMPLING_2000SPS 4
#define ADS1292R_OVERSAMPLING_4000SPS 5
#define ADS1292R_OVERSAMPLING_8000SPS 6
#define ADS1292R_OVERSAMPLING_NONESPS 7
/* 属于ADS1292R_REG_CONFIG2的寄存器设置 */
#define ADS1292R_PDB_LOFF_COMP_OFF 0 /* 导联脱落比较器关，默认 */
#define ADS1292R_PDB_LOFF_COMP_ON 1 /* 导联脱落比较器开 */
#define ADS1292R_PDB_REFBUF_OFF 0 /* 内部参考电压关，默认 */
#define ADS1292R_PDB_REFBUF_ON 1 /* 内部参考电压开 */
#define ADS1292R_VREF_2420MV 0 /* 选择参考电压为2.42v，默认 */
#define ADS1292R_VREF_4033MV 1 /* 选择参考电压为4.033v */
#define ADS1292R_CLK_OUTPUT_OFF 0 /* 时钟输出关，默认 */
#define ADS1292R_CLK_OUTPUT_ON 1 /* 时钟输出开 */
#define ADS1292R_INT_TEST_OFF 0 /* 内部测试电压关，默认 */
#define ADS1292R_INT_TEST_ON 1 /* 内部测试电压开 */
#define ADS1292R_INT_FREQ_DC 0 /* 直流，默认 */
#define ADS1292R_INT_FREQ_AC 1 /* 1HZ方波 */
/* 属于ADS1292R_REG_LOFF的寄存器设置 */
/* 属于ADS1292R_REG_CH1SET，与ADS1292R_REG_CH2SET的寄存器设置 */
#define ADS1292R_CHx_OFF 1 /* 禁止使用通道一 */
#define ADS1292R_CHx_ON 0 /* 使用通道一，默认 */
#define ADS1292R_GAIN_6 0 /* 使用通道一6倍增益，默认 */
#define ADS1292R_GAIN_1 1 /* 使用通道一1倍增益 */
#define ADS1292R_GAIN_2 2 /* 使用通道一2倍增益 */
#define ADS1292R_GAIN_3 3 /* 使用通道一3倍增益 */
#define ADS1292R_GAIN_4 4 /* 使用通道一4倍增益 */
#define ADS1292R_GAIN_8 5 /* 使用通道一8倍增益 */
#define ADS1292R_GAIN_12 6 /* 使用通道一12倍增益 */
/* 选择通道一的输入 */
#define ADS1292R_CHx_INPUT_NORMAL 0 /* 正常电极输入，默认 */
#define ADS1292R_CHx_INPUT_SHORTED 1 /* 短路，测偏执用 */
#define ADS1292R_CHx_INPUT_RLD 2 /* 右腿驱动 */
/* For channel 1, (MVDDP – MVDDN) is [0.5(AVDD + AVSS)]; for channel 2, (MVDDP – MVDDN) is DVDD / 4. */
/* For channel 2,VDD / 2 for supply measurement */
#define ADS1292R_CHx_INPUT_MVDD 3
#define ADS1292R_CHx_INPUT_TEMP 4 /* 板载温度 */
#define ADS1292R_CHx_INPUT_TEST 5 /* 内部测试信号 */
#define ADS1292R_CHx_INPUT_RLDDRP 6
#define ADS1292R_CHx_INPUT_RLDDRM 7
#define ADS1292R_CHx_INPUT_RLDDRPM 8
#define ADS1292R_CHx_INPUT_ROUTE 9 /* 连接到通道三 */
#define ADS1292R_CHx_INPUT_RESERVED 10 /* 预留 */
/* 属于ADS1292R_REG_RLDSENS的寄存器设置 */
#define ADS1292R_CHOP_FREQ_DIV4 3 /* PGA斩波频率未fMOD/4 */
#define ADS1292R_PDB_RLD_OFF 0 /* 右腿驱动电源关，默认 */
#define ADS1292R_PDB_RLD_ON 1 /* 右腿驱动电源开 */
#define ADS1292R_PDB_RLD_SENSE_OFF 0 /* 右腿驱动导联脱落检测关，默认 */
#define ADS1292R_PDB_RLD_SENSE_ON 1 /* 右腿驱动导联脱落检测开 */
#define ADS1292R_RLD2N_OFF 0 /* 通道二负极为右腿输入关，默认 */
#define ADS1292R_RLD2N_ON 1 /* 通道二负极为右腿输入开 */
#define ADS1292R_RLD2P_OFF 0 /* 通道二正极为右腿输入关，默认 */
#define ADS1292R_RLD2P_ON 1 /* 通道二正极为右腿输入开 */
#define ADS1292R_RLD1N_OFF 0 /* 通道一负极为右腿输入关，默认 */
#define ADS1292R_RLD1N_ON 1 /* 通道一负极为右腿输入开 */
#define ADS1292R_RLD1P_OFF 0 /* 通道一正极为右腿输入关，默认 */
#define ADS1292R_RLD1P_ON 1 /* 通道一正极为右腿输入开 */
/* 属于ADS1292R_REG_LOFFSENS的寄存器设置 */
#define ADS1292R_FLIP2_OFF 0 /* 导联脱落检测通道二电流方向关，默认 */
#define ADS1292R_FLIP2_ON 1 /* 导联脱落检测通道二电流方向开 */
#define ADS1292R_FLIP1_OFF 0 /* 导联脱落检测通道一电流方向关，默认 */
#define ADS1292R_FLIP1_ON 1 /* 导联脱落检测通道一电流方向开 */
#define ADS1292R_LOFF2N_OFF 0 /* 通道二负极导联脱落检测关，默认 */
#define ADS1292R_LOFF2N_ON 1 /* 通道二负极导联脱落检测开 */
#define ADS1292R_LOFF2P_OFF 0 /* 通道二正极导联脱落检测关，默认 */
#define ADS1292R_LOFF2P_ON 1 /* 通道二正极导联脱落检测开 */
#define ADS1292R_LOFF1N_OFF 0 /* 通道一负极导联脱落检测关，默认 */
#define ADS1292R_LOFF1N_ON 1 /* 通道一负极导联脱落检测开 */
#define ADS1292R_LOFF1P_OFF 0 /* 通道一正极导联脱落检测关，默认 */
#define ADS1292R_LOFF1P_ON 1 /* 通道一正极导联脱落检测开 */
/* 属于ADS1292R_REG_LOFFSTAT的寄存器设置 */
#define ADS1292R_CLK_DIV4 0 /* 0 = fMOD = fCLK / 4 (default, use when fCLK = 512 kHz) */
#define ADS1292R_CLK_DIV16 1 /* 1 = fMOD = fCLK / 16 (use when fCLK = 2.048 MHz) */
/* 属于ADS1292R_REG_RESP1的寄存器设置 */
#define ADS1292R_DEMOD_EN1_OFF 0 /* 通道一上的呼吸解调电路关，默认 */
#define ADS1292R_DEMOD_EN1_ON 1 /* 通道一上的呼吸解调电路开 */
#define ADS1292R_DEMOD_EN_OFF 0 /* 通道一上的呼吸调制电路关，默认 */
#define ADS1292R_DEMOD_EN_ON 1 /* 通道一上的呼吸调制电路开 */
#define ADS1292R_RESPPH_0 0 /* 解调信号相位偏移0，默认 */
#define ADS1292R_RESPPH_135 0x0c /* 解调信号相位偏移135度 */
#define ADS1292R_RESP_CTRL_INT 0 /* 内部呼吸内部时钟，默认 */
#define ADS1292R_RESP_CTRL_EXT 1 /* 内部呼吸外部时钟 */
/* 属于ADS1292R_REG_RESP2的寄存器设置 */
#define ADS1292R_CALIB_ON_OFF 0 /* 校准关，默认 */
#define ADS1292R_CALIB_ON_ON 1 /* 校准开 */
#define ADS1292R_RESP_FREQ_36 0 /* 通道一上的呼吸调制电路关，默认 */
#define ADS1292R_RESP_FREQ_64 1 /* 通道一上的呼吸调制电路开 */
#define ADS1292R_RLDREF_EXT 0 /* 右腿驱动参考电压选择外部反馈，默认 */
#define ADS1292R_RLDREF_INT 1 /* 右腿驱动参考电压选择内部信号 */
/* 属于ADS1292R_REG_GPIO的寄存器设置 */
/**
* @}
*/
/** @addtogroup ADS1292R_TYP_REG_MASK ADS1292R TYP Reg Mask
* @brief 各寄存器值与位置掩码，被ADS1292R_GET_BITS与ADS1292R_SET_BITS函数调用
* @{
*/
#define ADS1292R_ID_POS 0
#define ADS1292R_ID_MASK 0xFF
#define ADS1292R_SINGLE_SHOT_POS 7
#define ADS1292R_SINGLE_SHOT_MASK 0x80
#define ADS1292R_DR_POS 0
#define ADS1292R_DR_MASK 0x07
#define ADS1292R_PDB_LOFF_COMP_POS 6
#define ADS1292R_PDB_LOFF_COMP_MASK 0x40
#define ADS1292R_PDB_REFBUF_POS 5
#define ADS1292R_PDB_REFBUF_MASK 0x20
#define ADS1292R_VREF_4V_POS 4
#define ADS1292R_VREF_4V_MASK 0x10
#define ADS1292R_CLK_EN_POS 3
#define ADS1292R_CLK_EN_MASK 0x80
#define ADS1292R_INT_TEST_POS 1
#define ADS1292R_INT_TEST_MASK 0x02
#define ADS1292R_INT_FREQ_POS 0
#define ADS1292R_INT_FREQ_MASK 0x01
#define ADS1292R_PDx_POS 7
#define ADS1292R_PDx_MASK 0x80
#define ADS1292R_GAINx_POS 4
#define ADS1292R_GAINx_MASK 0x70
#define ADS1292R_MUXx_POS 0
#define ADS1292R_MUXx_MASK 0x0F
#define ADS1292R_CHOP_POS 6
#define ADS1292R_CHOP_MASK 0xC0
#define ADS1292R_PDB_RLD_POS 5
#define ADS1292R_PDB_RLD_MASK 0x20
#define ADS1292R_RLD_LOFF_SENSE_POS 4
#define ADS1292R_RLD_LOFF_SENSE_MASK 0x10
#define ADS1292R_RLD2N_POS 3
#define ADS1292R_RLD2N_MASK 0x08
#define ADS1292R_RLD2P_POS 2
#define ADS1292R_RLD2P_MASK 0x04
#define ADS1292R_RLD1N_POS 1
#define ADS1292R_RLD1N_MASK 0x02
#define ADS1292R_RLD1P_POS 0
#define ADS1292R_RLD1P_MASK 0x01
#define ADS1292R_FLIP2_POS 5
#define ADS1292R_FLIP2_MASK 0x20
#define ADS1292R_FLIP1_POS 4
#define ADS1292R_FLIP1_MASK 0x10
#define ADS1292R_LOFF2N_POS 3
#define ADS1292R_LOFF2N_MASK 0x08
#define ADS1292R_LOFF2P_POS 2
#define ADS1292R_LOFF2P_MASK 0x04
#define ADS1292R_LOFFN_POS 1
#define ADS1292R_LOFF1N_MASK 0x02
#define ADS1292R_LOFF1P_POS 0
#define ADS1292R_LOFF1P_MASK 0x01
#define ADS1292R_CLK_DIV_POS 6
#define ADS1292R_CLK_DIV_MASK 0x40
#define ADS1292R_RESP_DEMOD_EN1_POS 7
#define ADS1292R_RESP_DEMOD_EN1_MASK 0x80
#define ADS1292R_RESP_MOD_EN_POS 6
#define ADS1292R_RESP_MOD_EN_MASK 0x40
#define ADS1292R_RESP_PH_POS 2
#define ADS1292R_RESP_PH_MASK 0x3c
#define ADS1292R_RESP_CTRL_POS 0
#define ADS1292R_RESP_CTRL_MASK 0x01
#define ADS1292R_CALIB_ON_POS 7
#define ADS1292R_CALIB_ON_MASK 0x80
#define ADS1292R_RESP_FREQ_POS 2
#define ADS1292R_RESP_FREQ_MASK 0x04
#define ADS1292R_RLDREF_INT_POS 1
#define ADS1292R_RLDREF_INT_MASK 0x02
/**
* @}
*/
/** @addtogroup ADS1292R_TYP_COMMAND ADS1292R TYP COMMAND
* @brief 命令
* @{
*/
/* System Commands */
#define ADS1292R_COMMAND_WAKEUP 0x02
#define ADS1292R_COMMAND_STANDBY 0x04
#define ADS1292R_COMMAND_RESET 0x06
#define ADS1292R_COMMAND_START 0x08
#define ADS1292R_COMMAND_STOP 0x0A
#define ADS1292R_COMMAND_OFFSETCAL 0x1A
/* Data Read Commands */
#define ADS1292R_COMMAND_RDATAC 0x10
#define ADS1292R_COMMAND_SDATAC 0x11
#define ADS1292R_COMMAND_RDATA 0x12
/* Register Read Commands，最后5位为读写的地址 */
#define ADS1292R_COMMAND_RREG 0x20
#define ADS1292R_COMMAND_WREG 0x40
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @brief 读取ADS1292R的指定寄存器的指定位
* @details
* @param[in] bitname 位名字
* @param[in] reg 寄存器名字
* @retval 该位的值
*/
#define ADS1292R_GET_BITS(bitname, reg) ((reg & bitname##_MASK) >> bitname##_POS)
/** @brief 设置ADS1292R的指定寄存器的指定位
* @details
* @param[in] reg 寄存器名字
* @param[in] bitname 位名字
* @param[in] val 要设置的值
* @retval NONE
*/
#define ADS1292R_SET_BITS(reg, bitname, val) ((reg & ~bitname##_MASK) \
| ((val << bitname##_POS) & bitname##_MASK))
/* Exported functions --------------------------------------------------------*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __ADS1292_TYP_H */

2
app/src/board/board_adc_module_ctrl.h
View File

@ -3,7 +3,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "board/board.h"
#include "aproject_config/config.h"
#include "znordic.h"
void BoardAdc_init();

2
app/src/board/board_battery_state.c
View File

@ -1,7 +1,7 @@
#include "board_battery_state.h"
#include "app_event.h"
#include "basic_service/app_event.h"
#include "board_adc_module_ctrl.h"
/*******************************************************************************
* Battery *

2
app/src/board/board_battery_state.h
View File

@ -3,7 +3,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "board/board.h"
#include "aproject_config/config.h"
#include "znordic.h"
void BoardBattery_init();

2
app/src/board/board_beep_ctrl.h
View File

@ -3,7 +3,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "board/board.h"
#include "aproject_config/config.h"
#include "znordic.h"
typedef enum {

37
app/src/board/board_ecg_sensor.c
View File

@ -1,7 +1,6 @@
#include "board_ecg_sensor.h"
#include "ads1291/ads1292r_typ.h"
#include "app_event_distribute.h"
#include "basic_service/app_event_distribute.h"
#include "board_adc_module_ctrl.h"
#if 0
@ -64,7 +63,7 @@ int16_t BoardEcgSensor_set_sence_state() {
}
#endif
#if 0
void BoardEcgSensor_load() {}
void BoardEcgSensor_unload() {}
@ -167,12 +166,12 @@ uint8_t ads1292r_rw_reg(uint8_t cmd, uint8_t data) {
return rx;
}
#define port_delay_ms nrf_delay_ms
#define port_delay_us nrf_delay_us
#define port_delay_ms nrf_delay_ms
#define port_delay_us nrf_delay_us
#define ADS1292_START_RESET() nrf_gpio_pin_clear(ADS1291_START_PIN)
#define ADS1292_START_SET() nrf_gpio_pin_set(ADS1291_START_PIN)
#define ADS1292_REST_RESET() nrf_gpio_pin_clear(ADS1291_PWDN_PIN)
#define ADS1292_REST_SET() nrf_gpio_pin_set(ADS1291_PWDN_PIN)
#define ADS1292_START_SET() nrf_gpio_pin_set(ADS1291_START_PIN)
#define ADS1292_REST_RESET() nrf_gpio_pin_clear(ADS1291_PWDN_PIN)
#define ADS1292_REST_SET() nrf_gpio_pin_set(ADS1291_PWDN_PIN)
uint8_t ads1292r_send_cmd(uint8_t cmd) {
uint8_t rx = 0;
@ -187,6 +186,7 @@ uint8_t ads1292r_send_cmd(uint8_t cmd) {
return rx;
}
void znrf_serial_tx(char const * p_buffer, size_t len);
void BoardEcgSensor_init() {
/**
@ -195,8 +195,6 @@ void BoardEcgSensor_init() {
ads1291_init();
ADS1292_CS_SET();
ADS1292_REST_RESET();
@ -214,11 +212,26 @@ void BoardEcgSensor_init() {
nrf_gpio_pin_set(ADS1291_PWDN_PIN);
nrf_delay_ms(2000);
char txdata[]= {1,2,3,4};
while (true) /* ʶ±ðоƬÐͺţ¬1291:0x52 */
{
uint8_t id = ads1292r_rw_reg(ADS1292R_COMMAND_RREG | ADS1292R_REG_ID, 0);
ZLOGI("ads1292r id:%x", id);
znrf_serial_tx(txdata,4);
znordic_force_flush_log();
nrf_delay_ms(1000);
}
}
#endif
void BoardEcgSensor_init() {}
void BoardEcgSensor_load() {}
void BoardEcgSensor_unload() {}
int16_t BoardEcgSensor_nlod_get_connected_state() { return 0; }
int16_t BoardEcgSensor_plod_get_connected_state() { return 0; }
int16_t BoardEcgSensor_plod_get_connected_state_after_filter() { return 0; }
int16_t BoardEcgSensor_plod_state_has_disconnected_ms() { return 0; }
int16_t BoardEcgSensor_plod_get_ecg_val() { return 0; }
int16_t BoardEcgSensor_set_sence_state() { return 0; }

2
app/src/board/board_ecg_sensor.h
View File

@ -3,7 +3,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "board/board.h"
#include "aproject_config/config.h"
#include "znordic.h"
void BoardEcgSensor_init();

2
app/src/board/board_eeprom_driver.c
View File

@ -14,8 +14,6 @@
#include "nrf_drv_wdt.h"
#include "nrf_gpio.h"
//
#include "basic/ssd1306/driver_ssd1306.h"
#include "basic/ssd1306/driver_ssd1306_basic.h"
#define EEPROM_I2C_SCL_M 15 // I2C SCL多신
#define EEPROM_I2C_SDA_M 17 // I2C SDA多신

3
app/src/board/board_light_ctrl.c
View File

@ -1,6 +1,5 @@
#include "board_light_ctrl.h"
#include "board.h"
#include "aproject_config/config.h"
#include "znordic.h"
#include "nrf_gpio.h"

2
app/src/board/board_light_ctrl.h
View File

@ -3,7 +3,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "board/board.h"
#include "aproject_config/config.h"
typedef enum {
kLightEffect_unset,

6
app/src/board/board_ssd1306_interface.c
View File

@ -2,7 +2,6 @@
#include <stdint.h>
#include "basic/ssd1306/driver_ssd1306_interface.h"
#include "znordic.h"
//
#include "app_timer.h"
@ -11,8 +10,9 @@
#include "nrf_delay.h"
#include "nrf_gpio.h"
//
#include "basic/ssd1306/driver_ssd1306.h"
#include "basic/ssd1306/driver_ssd1306_basic.h"
#include "ssd1306/driver_ssd1306.h"
#include "ssd1306/driver_ssd1306_basic.h"
#include "ssd1306/driver_ssd1306_interface.h"
#define SCREEN_SPI_INSTANCE 0
#define SCREEN_RESET_PIN 20

4
app/src/board/board_ssd1306_interface.h
View File

@ -6,6 +6,10 @@
#include <stdbool.h>
#include "znordic.h"
#include "board/ssd1306/driver_ssd1306.h"
#include "board/ssd1306/driver_ssd1306_basic.h"
#include "board/ssd1306/wave_drawer.h"
void board_screen_init();
void board_screen_deinit();

0
app/src/basic/ssd1306/driver_ssd1306.c → app/src/board/ssd1306/driver_ssd1306.c
View File

0
app/src/basic/ssd1306/driver_ssd1306.h → app/src/board/ssd1306/driver_ssd1306.h
View File

0
app/src/basic/ssd1306/driver_ssd1306_basic.c → app/src/board/ssd1306/driver_ssd1306_basic.c
View File

0
app/src/basic/ssd1306/driver_ssd1306_basic.h → app/src/board/ssd1306/driver_ssd1306_basic.h
View File

0
app/src/basic/ssd1306/driver_ssd1306_font.h → app/src/board/ssd1306/driver_ssd1306_font.h
View File

0
app/src/basic/ssd1306/driver_ssd1306_interface.h → app/src/board/ssd1306/driver_ssd1306_interface.h
View File

0
app/src/basic/ssd1306/fontlib.c → app/src/board/ssd1306/fontlib.c
View File

0
app/src/basic/ssd1306/fontlib.h → app/src/board/ssd1306/fontlib.h
View File

0
app/src/basic/ssd1306/wave_drawer.c → app/src/board/ssd1306/wave_drawer.c
View File

0
app/src/basic/ssd1306/wave_drawer.h → app/src/board/ssd1306/wave_drawer.h
View File

3
app/src/config.h
View File

@ -1,3 +0,0 @@
#pragma once
#include "board/board.h"

0
app/src/device_controler.c
View File

0
app/src/device_controler.h
View File

5
app/src/display_manager_res.h
View File

@ -1,5 +0,0 @@
#pragma once
#include <stdint.h>

9
app/src/heart_ware_sample_data_mgr.h
View File

@ -1,9 +0,0 @@
#pragma once
#include <stdint.h>
#include "app_event.h"
#include "app_event_distribute.h"
#include "nrfx_timer.h"
void hwsd_mgr_push_one_frame(one_frame_t data);
void hwsd_mgr_reset_buffer();

107
app/src/heart_wave_sample_data_pre_process.c
View File

@ -1,107 +0,0 @@
#include "heart_wave_sample_data_pre_process.h"
/***********************************************************************************************************************
* ALGO *
***********************************************************************************************************************/
typedef struct {
float value;
float efectiveFactor;
} filter_t;
typedef struct {
float coef[2];
float v_out[2];
} LPFilter;
#define PI 3.14159265358979323846f
static float Filter(filter_t* filter, float newInput) {
float newv = ((float)filter->value * (1.0f - filter->efectiveFactor)) + ((float)newInput * filter->efectiveFactor);
filter->value = newv;
return newv;
}
void LPFilter_Init(LPFilter* filter, float cutoffFreqHz, float sampleTimeS) {
float RC = 0.0;
RC = 1.0 / (2 * PI * cutoffFreqHz);
filter->coef[0] = sampleTimeS / (sampleTimeS + RC);
filter->coef[1] = RC / (sampleTimeS + RC);
filter->v_out[0] = 0.0;
filter->v_out[1] = 0.0;
}
float LPFilter_Update(LPFilter* filter, float v_in) {
filter->v_out[1] = filter->v_out[0];
filter->v_out[0] = (filter->coef[0] * v_in) + (filter->coef[1] * filter->v_out[1]);
return (filter->v_out[0]);
}
/**
* @brief 放大显示数据
*
* @param val
* @param valcener
* @param amp
* @return float
*/
static float amp_display_val(uint16_t val, uint16_t valcener, float amp) {
float valf = (float)val - valcener;
valf = valf * amp;
valf += valcener;
if (valf >= 100) {
valf = 100;
}
if (valf <= 0) {
valf = 0;
}
return valf;
}
uint16_t getRecommendedMagnification() {
// return 0;
uint16_t max = QRS_getMaxValueLastVal();
if (max == 0) {
return 15;
}
// 3750.0f
if (max <= (3750 / 2)) {
return 15;
}
float af = (3750 / 2) / (max - 3750 / 2);
if (af > 15) {
return 15;
}
return af;
}
/***********************************************************************************************************************
* VAR *
***********************************************************************************************************************/
static one_frame_t m_datacache;
static one_frame_t m_displaydata;
filter_t m_filter = {0, 0.8};
LPFilter m_lpfilter_01;
LPFilter m_lpfilter_02;
void hwsd_pre_processer_init() { QRS_resetBuf(); }
void hwsd_pre_processer_process(one_frame_t framdata) { //
m_datacache = framdata;
m_displaydata = framdata;
/*******************************************************************************
* 显示数据计算并赋值 *
*******************************************************************************/
// QRS_getMaxValueLastVal();
// float lowpassf_val = LPFilter_Update(&m_lpfilter_01, framdata);
// QRS_processData(lowpassf_val);
// float val_af100 = (float)lowpassf_val / 3750.0f * 100; // 参考电压为3.6v,但信号范围为3.3v
// val_af100 = amp_val(val_af100, 50, getRecommendedMagnification());
// val_af100 = LPFilter_Update(&m_lpfilter_02, val_af100);
// m_displaydata = m_datacache;
}
uint16_t hwsd_pre_processer_get_display_data() { return m_displaydata; }
one_frame_t hwsd_pre_processer_get_storage_data() { return m_datacache; }

8
app/src/main.c
View File

@ -6,10 +6,10 @@
#include <stdlib.h>
#include <string.h>
//
#include "app_event.h"
#include "app_event_distribute.h"
#include "basic/device_version_info_mgr.h"
#include "board/board.h"
#include "basic_service/app_event.h"
#include "basic_service/app_event_distribute.h"
#include "basic_service/device_version_info_mgr.h"
#include "aproject_config/config.h"
#include "zble_module.h"
#include "zdatachannel_service.h"
//

18
app/src/one_conduction_main.c
View File

@ -1,19 +1,21 @@
#include <math.h>
#include "app_event.h"
#include "app_event_distribute.h"
#include "basic/device_version_info_mgr.h"
#include "ble_cmd_process_service.h"
#include "basic_service/app_event.h"
#include "basic_service/app_event_distribute.h"
#include "basic_service/device_version_info_mgr.h"
//
#include "board/board_adc_module_ctrl.h"
#include "board/board_battery_state.h"
#include "board/board_beep_ctrl.h"
#include "board/board_ecg_sensor.h"
#include "board/board_light_ctrl.h"
#include "board/board_power_mgr.h"
#include "config.h"
#include "display_manager.h"
#include "heart_wave_sample_service.h"
#include "sample_data_manager.h"
//
#include "service/ble_cmd_processer/ble_cmd_process_service.h"
#include "service/display_mgr/display_manager.h"
#include "service/heart_wave_sample_service/heart_wave_sample_service.h"
#include "service/storage/storage_service.h"
#include "zble_module.h"
#include "zdatachannel_service.h"
#include "znordic.h"

13
app/src/ble_cmd_process_service.c → app/src/service/ble_cmd_processer/ble_cmd_process_service.c
View File

@ -1,13 +1,14 @@
#include "ble_cmd_process_service.h"
#include "../../ify_hrs_protocol/heart_rate_sensor_protocol.h"
#include "basic/device_version_info_mgr.h"
#include "board/board.h"
#include "aproject_config/config.h"
//
#include "ify_hrs_protocol/heart_rate_sensor_protocol.h"
//
#include "basic_service/device_version_info_mgr.h"
#include "board/board_battery_state.h"
#include "board/board_ecg_sensor.h"
#include "config.h"
#include "sample_data_manager.h"
#include "service/storage/storage_service.h"
//
#include "zble_module.h"
#include "zdatachannel_service.h"

2
app/src/ble_cmd_process_service.h → app/src/service/ble_cmd_processer/ble_cmd_process_service.h
View File

@ -1,6 +1,6 @@
#pragma once
#include "device_state.h"
#include "basic_service/device_state.h"
void ble_cmder_init();
void ble_cmder_uninit();

5
app/src/display_manager.c → app/src/service/display_mgr/display_manager.c
View File

@ -4,12 +4,9 @@
//
#include <stdarg.h>
#include "basic/ssd1306/driver_ssd1306.h"
#include "basic/ssd1306/driver_ssd1306_basic.h"
#include "basic/ssd1306/wave_drawer.h"
#include "board/board_battery_state.h"
#include "board/board_ssd1306_interface.h"
#include "config.h"
#include "aproject_config/config.h"
#include "font.h"
PageState_t g_pageState;

0
app/src/display_manager.h → app/src/service/display_mgr/display_manager.h
View File

0
app/src/font.h → app/src/service/display_mgr/font.h
View File

6
app/src/heart_ware_sample_data_mgr.c → app/src/service/heart_wave_sample_service/heart_ware_sample_data_mgr.c
View File

@ -1,8 +1,6 @@
#include "app_event.h"
#include "app_event_distribute.h"
#include "basic/qrs_time_domain_zh.h"
#include "basic_service/app_event.h"
#include "basic_service/app_event_distribute.h"
#include "board/board_ecg_sensor.h"
#include "heart_wave_sample_service.h"
#include "nrfx_timer.h"
static uint32_t m_frame_index = 0; // 帧绝对序号

9
app/src/service/heart_wave_sample_service/heart_ware_sample_data_mgr.h
View File

@ -0,0 +1,9 @@
#pragma once
#include <stdint.h>
#include "basic_service/app_event.h"
#include "basic_service/app_event_distribute.h"
#include "nrfx_timer.h"
void hwsd_mgr_push_one_frame(one_frame_t data);
void hwsd_mgr_reset_buffer();

12
app/src/service/heart_wave_sample_service/heart_wave_sample_data_pre_process.c
View File

@ -0,0 +1,12 @@
#include "heart_wave_sample_data_pre_process.h"
static one_frame_t m_datacache;
static one_frame_t m_displaydata;
void hwsd_pre_processer_init() {}
void hwsd_pre_processer_process(one_frame_t framdata) { //
m_datacache = framdata;
m_displaydata = framdata;
}
uint16_t hwsd_pre_processer_get_display_data() { return m_displaydata; }
one_frame_t hwsd_pre_processer_get_storage_data() { return m_datacache; }

2
app/src/heart_wave_sample_data_pre_process.h → app/src/service/heart_wave_sample_service/heart_wave_sample_data_pre_process.h
View File

@ -1,7 +1,7 @@
#pragma once
#include <stdint.h>
#include "app_event.h"
#include "basic_service/app_event.h"
void hwsd_pre_processer_init();
void hwsd_pre_processer_process(one_frame_t framdata);

7
app/src/heart_wave_sample_service.c → app/src/service/heart_wave_sample_service/heart_wave_sample_service.c
View File

@ -1,8 +1,7 @@
#include "heart_wave_sample_service.h"
#include "app_event.h"
#include "app_event_distribute.h"
#include "basic/qrs_time_domain_zh.h"
#include "basic_service/app_event.h"
#include "basic_service/app_event_distribute.h"
#include "board/board_ecg_sensor.h"
#include "heart_ware_sample_data_mgr.h"
#include "heart_wave_sample_data_pre_process.h"
@ -79,6 +78,6 @@ float hwss_read_val(void) {
return val;
}
float hwss_read_heart_rate(void) { //
return QRS_getHeartRate();
return 0;
}
int hwss_has_captured_time_ms() { return (znordic_getpower_on_s() - m_start_capture_tp) * 1000; }

0
app/src/heart_wave_sample_service.h → app/src/service/heart_wave_sample_service/heart_wave_sample_service.h
View File

1
app/src/sample_data_manager.c → app/src/service/storage/sample_data_manager.c
View File

@ -4,6 +4,7 @@
#include "zeeprom_fs.h"
#include "znordic.h"
#include "aproject_config/config.h"
static sample_data_fileinfo_t fileinfocache[MAX_FILE_NUM * 2];
static uint8_t fileinfocache_count = 0;

2
app/src/sample_data_manager.h → app/src/service/storage/sample_data_manager.h
View File

@ -2,7 +2,7 @@
#include <stdbool.h>
#include <stdint.h>
#include "config.h"
#include "aproject_config/config.h"
#include "zeeprom_fs.h"
void sample_data_mgr_init();

3
app/src/service/storage/storage_service.h
View File

@ -0,0 +1,3 @@
#pragma once
#include "sample_data_manager.h"
#include "zeeprom_fs.h"

0
app/src/zeeprom_fs.c → app/src/service/storage/zeeprom_fs.c
View File

0
app/src/zeeprom_fs.h → app/src/service/storage/zeeprom_fs.h
View File

0
app/src/basic/FIR.c → bak/FIR.c
View File

0
app/src/basic/FIR.h → bak/FIR.h
View File

0
app/src/basic/HC_Chen_detect.c → bak/HC_Chen_detect.c
View File

0
app/src/basic/HC_Chen_detect.h → bak/HC_Chen_detect.h
View File

0
app/src/basic/Pan_Tompkins_detect.c → bak/Pan_Tompkins_detect.c
View File

0
app/src/basic/Pan_Tompkins_detect.h → bak/Pan_Tompkins_detect.h
View File

0
app/src/basic/QRS.h → bak/QRS.h
View File

0
app/src/basic/So_Chen_detect.c → bak/So_Chen_detect.c
View File

0
app/src/basic/So_Chen_detect.h → bak/So_Chen_detect.h
View File

0
app/src/basic/adaptive_algorithm.c → bak/adaptive_algorithm.c
View File

0
app/src/basic/adaptive_algorithm.h → bak/adaptive_algorithm.h
View File

0
app/src/basic/qrs_time_domain_zh.c → bak/qrs_time_domain_zh.c
View File

0
app/src/basic/qrs_time_domain_zh.h → bak/qrs_time_domain_zh.h
View File

2
libznordic

@ -1 +1 @@
Subproject commit c7adce2fba7f404c4076a440b520b733c70df89c
Subproject commit 6000f285863c7979f08800f2aa6de8db96c99df4

2
sdk

@ -1 +1 @@
Subproject commit 5d4b7977455415a88f3a8bd62dc4213f1edc0b37
Subproject commit 1d34e6ac316c27dc0e1149835d5f1ad53e074c88
Write Preview
Loading…
Cancel
Save