硬件初步测试通过

.vscode/settings.json

@@ -188,7 +188,10 @@
         "qrs_time_domain_zh.h": "c",
         "board_eeprom_driver.h": "c",
         "board_power_mgr.h": "c",
-        "heart_ware_sample_data_mgr.h": "c"
+        "heart_ware_sample_data_mgr.h": "c",
+        "time.h": "c",
+        "nrf_gpio.h": "c",
+        "nrf_drv_clock.h": "c"
     },
     "files.encoding": "gbk"
 }

README.md

@@ -46,10 +46,5 @@ V10:
 ```
 单导:休眠527ua
 
-日志打开:
-sdk_config.h
-    #ifndef NRF_LOG_ENABLED
-    #define NRF_LOG_ENABLED 0
-    #endif
 
 ```

app/config/sdk_config.h

@@ -7767,11 +7767,11 @@
 // <e> NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend
 //==========================================================
 #ifndef NRF_LOG_BACKEND_UART_ENABLED
-#define NRF_LOG_BACKEND_UART_ENABLED 0
+#define NRF_LOG_BACKEND_UART_ENABLED 1
 #endif
 // <o> NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin 
 #ifndef NRF_LOG_BACKEND_UART_TX_PIN
-#define NRF_LOG_BACKEND_UART_TX_PIN 2
+#define NRF_LOG_BACKEND_UART_TX_PIN 41
 #endif
 
 // <o> NRF_LOG_BACKEND_UART_BAUDRATE  - Default Baudrate
@@ -7812,7 +7812,7 @@
 // <e> NRF_LOG_ENABLED - nrf_log - Logger
 //==========================================================
 #ifndef NRF_LOG_ENABLED
-#define NRF_LOG_ENABLED 0
+#define NRF_LOG_ENABLED 1
 #endif
 // <h> Log message pool - Configuration of log message pool
 

app/src/board/board.h

@@ -17,7 +17,7 @@
 
 #define BATTERY_ADC_PIN           NRF_SAADC_INPUT_AIN3
 #define BATTERY_ADC_CHANNEL       1  // 不重复即可
-#define BATTERY_CHARGE_DETECT_PIN 18
+#define BATTERY_CHARGE_DETECT_PIN 6
 
 /**
  * @brief
@@ -36,6 +36,7 @@
 
 #define LED_GREEN_PIN 9
 #define LED_BLUE_PIN  10
+#define LED_RED_PIN   39
 
 #define HEART_WAVE_SAMPLE_TMR_INSTANCE 3
 

app/src/board/board_battery_state.c

@@ -89,3 +89,12 @@ int16_t BoardBattery_get_battery_level() {
   return battery_level_filter(percent_int);
   // return percent_int;
 }
+
+int16_t BoardBattery_selfTest() {
+  nrf_gpio_cfg_sense_input(BATTERY_CHARGE_DETECT_PIN, NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
+  BoardAdc_load();
+  while (true) {
+    ZLOGI_BLOCK("adc raw:%d   %d", BoardBattery_get_adc_val(), nrf_gpio_pin_read(BATTERY_CHARGE_DETECT_PIN));
+    nrf_delay_ms(1000);
+  }
+}

app/src/board/board_battery_state.h

@@ -15,3 +15,7 @@ int16_t BoardBattery_get_battery_level();  // 0->100
 int16_t BoardBattery_get_charging_state();
 
 int16_t BoardBattery_sence_gpio_init_before_sleep();
+
+
+int16_t BoardBattery_selfTest();
+

app/src/board/board_eeprom_driver.c

@@ -86,7 +86,7 @@ void board_eeprom_write(uint32_t addr, const uint8_t *data, uint16_t len) {  //
 /**
  * @brief 用来检测读取整个eeprom是否正常
  */
-void SingleLeadECG_eeprom_wr_check() {
+void board_eeprom_wr_check() {
   /**
    * @brief
    *  256kbyte
@@ -113,10 +113,14 @@ void SingleLeadECG_eeprom_wr_check() {
     board_eeprom_read(addr, rdata_cache, EEPROM_PAGE);
     for (uint32_t j = 0; j < EEPROM_PAGE; j++) {
       if (rdata_cache[j] != (CHECKCODE)) {
-        ZLOGE("SingleLeadECG_eeprom_wr_check error %d %d %d", i, j, rdata_cache[j]);
+        ZLOGE("eeprom_wr_check error %d %d %d", i, j, rdata_cache[j]);
       }
     }
   }
+  ZLOGD_BLOCK("eeprom_wr_check ok,block here");
+  while (true) {
+    nrf_delay_ms(10);
+  }
 }
 
 void board_eeprom_read(uint32_t add, uint8_t *data, uint16_t len) {

app/src/board/board_eeprom_driver.h

@@ -16,3 +16,5 @@ void board_eeprom_init();
 void board_eeprom_uninit();
 void board_eeprom_write(uint32_t page, const uint8_t* data, uint16_t len);
 void board_eeprom_read(uint32_t add, uint8_t* data, uint16_t len);
+
+void board_eeprom_wr_check();

app/src/board/board_light_ctrl.c

@@ -2,13 +2,14 @@
 
 #include "board.h"
 #include "znordic.h"
+#include "nrf_gpio.h"
 
 #define BLINK_CNT             1
 #define BLINK_PERIOD_MS       (100)
 #define QUICK_BLINK_PERIOD_MS (100)
 #define SLOW_BLINK_PERIOD_MS  (2000)
 // LED_GREEN_PIN
-
+#if 0
 typedef struct {
   nrf_drv_pwm_t               driver;
   nrf_pwm_values_individual_t seq_values;
@@ -150,3 +151,64 @@ void BoardLight_blockFlash(int times, int periodms) {
     nrf_delay_ms(periodms);
   }
 }
+
+#endif
+
+void BoardLight_Init() {
+  // LED_GREEN_PIN
+  // LED_BLUE_PIN
+  // LED_RED_PIN
+
+  znrf_gpio_cfg_output(LED_GREEN_PIN, NRF_GPIO_PIN_NOPULL);
+  znrf_gpio_cfg_output(LED_BLUE_PIN, NRF_GPIO_PIN_NOPULL);
+  znrf_gpio_cfg_output(LED_RED_PIN, NRF_GPIO_PIN_NOPULL);
+}
+void BoardLight_load() {}
+void BoardLight_unload() {}
+
+void BoardLight_setGreenLightState(bool state) {
+  if (state) {
+    nrf_gpio_pin_set(LED_GREEN_PIN);
+  } else {
+    nrf_gpio_pin_clear(LED_GREEN_PIN);
+  }
+}
+void BoardLight_setRedLightState(bool state) {
+  if (state) {
+    nrf_gpio_pin_set(LED_RED_PIN);
+  } else {
+    nrf_gpio_pin_clear(LED_RED_PIN);
+  }
+}
+void BoardLight_setBlueLightState(bool state) {
+  if (state) {
+    nrf_gpio_pin_set(LED_BLUE_PIN);
+  } else {
+    nrf_gpio_pin_clear(LED_BLUE_PIN);
+  }
+}
+
+void BoardLight_toggleGreenLightState() {}
+
+void BoardLight_setGreenLightEffect(LightEffect_t effect) {}
+void BoardLight_blockFlash(int times, int periodms) {}
+
+void BoardLight_selftest() {
+  BoardLight_Init();
+  while (true) {
+    BoardLight_setGreenLightState(true);
+    nrf_delay_ms(1000);
+    BoardLight_setGreenLightState(false);
+    nrf_delay_ms(1000);
+
+    BoardLight_setRedLightState(true);
+    nrf_delay_ms(1000);
+    BoardLight_setRedLightState(false);
+    nrf_delay_ms(1000);
+
+    BoardLight_setBlueLightState(true);
+    nrf_delay_ms(1000);
+    BoardLight_setBlueLightState(false);
+    nrf_delay_ms(1000);
+  }
+}

app/src/board/board_light_ctrl.h

@@ -17,8 +17,15 @@ void BoardLight_Init();  // main
 void BoardLight_load();
 void BoardLight_unload();
 
-void BoardLight_setGreenLightState(bool state);  // 尽量不要直接使用该函数
-void BoardLight_toggleGreenLightState();         // 尽量不要直接使用该函数
+void BoardLight_setGreenLightState(bool state);
+void BoardLight_setRedLightState(bool state);
+void BoardLight_setBlueLightState(bool state);
+
+void BoardLight_toggleGreenLightState();
+
 
 void BoardLight_setGreenLightEffect(LightEffect_t effect);
 void BoardLight_blockFlash(int times, int periodms);
+
+
+void BoardLight_selftest();

app/src/main.c

@@ -34,8 +34,8 @@ extern void one_conduction_main();
 
 int main() {
   APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, 20);
-  znordic_init();
-  NRF_LOG_INFO("compile time :%s", __TIME__);
+  znordic_init_without_wd();
+
   /*******************************************************************************
    *                               À¶ÑÀ·þÎñ³õʼ»¯                                *
    *******************************************************************************/

app/src/one_conduction_main.c

@@ -155,6 +155,11 @@ static void app_event_listener(void* p_event_data, uint16_t event_size) {
   if (!p_event_data) return;
   app_event_t* p_event = (app_event_t*)p_event_data;
 
+  // BoardLight_blockFlash(3,100);
+  // ZLOGI("......");
+
+  // return;
+
   if (ds_now_state() != kdevice_state_standby &&   //
       ds_now_state() != kdevice_state_charging &&  //
       ds_now_state() != kdevice_state_poweron      //
@@ -245,7 +250,6 @@ static void app_event_listener(void* p_event_data, uint16_t event_size) {
         }
       }
     }
-
 #if 0
     // 低电量，设备进入待机模式
     else if (BoardBattery_get_battery_level() < APP_AUTO_STANDY_BATTERY_LEVEL && ds_cur_state_haspassed_ms() > 3000) {
@@ -430,10 +434,15 @@ void one_conduction_main() {
   board_power_mgr_init();
   board_power_mgr_main_power_supply_set(true);
 
+  // BoardBattery_selfTest();
+  // BoardLight_selftest();
+
   BoardBattery_init();
   BoardEcgSensor_init();
   BoardLight_Init();
   BoardBattery_load();
+
+  // power_on();
 #if 0
   if (BoardBattery_get_battery_level() < APP_WORK_BATTERY_LEVEL) {
     BoardLight_load();
@@ -452,5 +461,6 @@ void one_conduction_main() {
   ZERROR_CHECK(app_timer_start(m_state_machine_driver_tmr, APP_TIMER_TICKS(300), NULL));
 
   state_machine__change_to_standby_state();
+  // state_machine__change_to_poweroning_state();
   znordic_loop();
 }

libznordic

@@ -1 +1 @@
-Subproject commit 2cd92d921156e9c84915520186fd611062537f65
+Subproject commit e75326b00a9fd5f13aa20adf1f57c3e97c8c5b22

sdk

@@ -1 +1 @@
-Subproject commit 85cbd26451dabe41150d375647ccd23b85c42b00
+Subproject commit 5d4b7977455415a88f3a8bd62dc4213f1edc0b37