添加电极掉落检测

README.md

@@ -24,23 +24,24 @@
     1.如果蓝牙断开，停止采集(临时代码)，切换到mainPage OK ,通过ENABLE_AUTO_STOP_WHEN_BLE_DISCONNECTED使能
     2.如果蓝牙5分钟内没有收到任何消息，切换到mainPage OK
     3.如果采集超时时间超过设定时间，停止采集，切换到mainPage OK
+    4.导联断开连接后，蜂鸣器一直报警。OK
 
 MainPage:
     1. 如果蓝牙断开，进入休眠 OK
     2. 如果蓝牙5分钟内没有收到任何消息，进入休眠 OK
 
 添加一条新的开始采集指令，支持定时参数。（或者使用旧的开始采集指令）OK
-
-导联断开检测触发后，上报事件(不停止采集)。
-导联断开连接后，蜂鸣器一直报警。
+导联断开检测触发后，上报事件(不停止采集)。OK
 
 电量过低上报低电量事件。电量不足%1时，设备自动断开连接，并关机。
-低电量进入关机模式
-添加指令上传最新一条记录
 
 Final:
 修改休眠周期为30秒
 
+TODO2:
+    添加指令上传最新一条记录
+
+
 ...
 
 设备充电时不进入休眠（无法实现，无法检测当前设备是否正在充电） OK

app/src/board/board_beep_ctrl.c

@@ -14,7 +14,7 @@ static nrf_pwm_sequence_t const    m_beep_pwm0_seq        = {
 static nrf_drv_pwm_config_t const m_beep_pwm0_config0 = {
     .output_pins =
         {
-            BEEP_PIN ,  //
+            BEEP_PIN,  //
             NRF_DRV_PWM_PIN_NOT_USED,
             NRF_DRV_PWM_PIN_NOT_USED,
             NRF_DRV_PWM_PIN_NOT_USED,
@@ -92,6 +92,8 @@ void BoardBeepCtrl_set(uint8_t state) {
 }
 
 void BoardBeepCtrl_setEffect(BoardBeepEffect_t effect) {
+  if (m_beep_effect == effect) return;
+
   m_beep_effect = effect;
 
   app_timer_stop(m_beep_tmr);

app/src/device_ctrl_service.c

@@ -206,6 +206,15 @@ static void app_event_listener(void* p_event_data, uint16_t event_size) {  //
       SampleDataMgr_write(m_sample_data_fd, (uint8_t*)event->val.block_sensor_data.data, event->val.block_sensor_data.len);
     }
 
+    uint8_t dropdata0 = hwss_get_drop_state0();
+    uint8_t dropdata1 = hwss_get_drop_state1();
+
+    if (dropdata0 || dropdata1) {
+      BoardBeepCtrl_setEffect(kBoardBeepEffect_continuousShortBeep);
+    }else{
+      BoardBeepCtrl_setEffect(kBoardBeepEffect_none);
+    }
+
     bool stopcapture = false;
     if (SampleDataMgr_getFileSizeByFd(m_sample_data_fd) > SDCARD_MAX_FILE_SIZE) {
       ZLOGI("stop sample because file size is too large");

app/src/heart_wave_sample_service.c

@@ -372,8 +372,15 @@ static void ads1293_init() {
 
   ads1293_spi_writereg(&m_ads1293_0, TI_ADS1293_CONFIG_REG, 0);
 
-  ads1293_load_cfg(&m_ads1293_0);
-  ads1293_load_cfg(&m_ads1293_1);
+  // ads1293_load_cfg(&m_ads1293_0);
+  // ads1293_load_cfg(&m_ads1293_1);
+
+  for (uint16_t i = 0; i < ZARRAY_SIZE(m_prvads0cfg); i++) {
+    ads1293_spi_writereg_and_check(&m_ads1293_0, m_prvads0cfg[i].add, m_prvads0cfg[i].data);
+  }
+  for (uint16_t i = 0; i < ZARRAY_SIZE(m_prvads1cfg); i++) {
+    ads1293_spi_writereg_and_check(&m_ads1293_1, m_prvads1cfg[i].add, m_prvads1cfg[i].data);
+  }
 
   /**
    * @brief READYÒý½ÅÖжϳõʼ»¯

app/src/heart_wave_sample_service.h

@@ -34,4 +34,4 @@ bool hwss_is_capturing(void);
 uint32_t hwss_started_has_passed_s(void);
 
 uint8_t hwss_get_drop_state0();
-uint8_t hwss_get_drop_state1();
+uint8_t hwss_get_drop_state1();