#include "tabbuilder.hpp"

#include "../dep.hpp"

using namespace iflytop;
using namespace app_transmit_disinfection;
using namespace transmit_disfection_protocol;

#define CAN_MASTER TransmitDisinfectionCanMaster::ins()

static void readBoardInfo(int deviceId) {
  ack_read_board_info_data_t ack = CAN_MASTER->readboardinfo(deviceId);
  ISHOW("boardType        :%s(%d)", BoardTypeId2Str(ack.boardType), ack.boardType);
  ISHOW("projectId        :%s(%d)", ProjectIDToString(ack.projectId), ack.projectId);
  ISHOW("protcol_version  :%d", ack.protcol_version);
  ISHOW("software_version :%d", ack.software_version);
  ISHOW("hardware_version :%d", ack.hardware_version);
}

static void readSysInfo(int deviceId) {
  //
  ack_sysinfo_t  ack = CAN_MASTER->readsysinfo(deviceId);
  ask_taskinfo_t task[20];
  for (int i = 0; i < ack.taskNum; i++) {
    task[i] = CAN_MASTER->readtaskinfo(deviceId, i);
  }
  ISHOW("=========================== sys  info ===========================");
  ISHOW("total_heap_size     :%d", ack.total_heap_size);
  ISHOW("free_heap_size      :%d", ack.free_heap_size);
  ISHOW("free_sys_heap_size  :%d", ack.free_sys_heap_size);
  ISHOW("sysHasRun           :%d", ack.sysHasRun);
  ISHOW("=");

  ISHOW("=========================== task info ===========================");
  ISHOW("taskoff   name   state    stackRemainSize  priority");
  for (int i = 0; i < ack.taskNum; i++) {
    ISHOW("%d    %10s    %c    %d    %d", i, task[i].taskName, task[i].state, task[i].stackRemindSize, task[i].priority);
  }
  ISHOW("=");
}

ZQVTabPage *TabBuilder::getTab(const char *tabname) {
  if (tabMap.find(tabname) == tabMap.end()) {
    ZQVTabPage *tab = new ZQVTabPage(fathertab, tabname);
    tabMap[tabname] = tab;
  }
  return tabMap[tabname];
}

// int  blowserIsOpen(int boardid) {}
// int  airCompressorIsOpen(int boardid) {}
// int airTightnessTestACIsOpen(int boardid) {}
// int  heaterIsOpen(int boardid) {}
// extChSelectorGetCh
// int  airTightnessTestIsCutoff(int boardid) { return m_com->callcmd0(boardid, kfn_air_tightness_test_is_cutoff, DEFUALT_OVERTIME)->getContent(0); }
// void warningLightReadState(int boardid, int *r, int *g, int *b, int *warning);

void TabBuilder::buildBoardBasicCtrl(const char *tabname, int boardid) {  //
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "通用", 4);
  box->newSubButton("PingAll", [this, boardid](int argn, const char **args) { CAN_MASTER->pingAllBoard(); });
  box->newSubButtonEnd();

  if (boardid >= 0) {
    box->newSubButton("读取板卡信息", [this, boardid](int argn, const char **args) { readBoardInfo(boardid); });
    box->newSubButton("读取系统信息", [this, boardid](int argn, const char **args) { readSysInfo(boardid); });
    box->newSubButtonEnd();
    box->newSubButton("清除复位标识", [this, boardid](int argn, const char **args) { CAN_MASTER->clearResetFlag(boardid); });
    // enableReport
    box->newSubButtonEnd();
    box->newSubButton("使能上报", [this, boardid](int argn, const char **args) { CAN_MASTER->enableReport(boardid, 1); });
    box->newSubButton("失能上报", [this, boardid](int argn, const char **args) { CAN_MASTER->enableReport(boardid, 0); });
    box->newSubButtonEnd();
    box->newSubButton("复位板卡", [this, boardid](int argn, const char **args) { CAN_MASTER->resetBoard(boardid); });

  } else {
    box->newFunc("读取板卡信息", {"boardid"}, [this](int argn, const char **args) { readBoardInfo(atoi(args[0])); });
    box->newFunc("读取系统信息", {"boardid"}, [this](int argn, const char **args) { readSysInfo(atoi(args[0])); });
    box->newFunc("清除复位标识", {"boardid"}, [this](int argn, const char **args) { CAN_MASTER->clearResetFlag(atoi(args[0])); });
    box->newFunc("使能上报", {"boardid"}, [this](int argn, const char **args) { CAN_MASTER->enableReport(atoi(args[0]), 1); });
    box->newFunc("失能上报", {"boardid"}, [this](int argn, const char **args) { CAN_MASTER->enableReport(atoi(args[0]), 0); });
    box->newFunc("复位板卡", {"boardid"}, [this](int argn, const char **args) { CAN_MASTER->resetBoard(atoi(args[0])); });
  }
}
void TabBuilder::buildFnPumpCtrl(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "泵机控制(0:加液泵, 1:喷液泵)", 6);
  box->newFunc("pumpRotate", {"subid", "rpm"}, [](int argn, const char **args) {  //
    CAN_MASTER->pumpRotate(kFixBoardId_LiquidCtrl, atoi(args[0]), atoi(args[1]));
  });
  box->newFunc("pumpStop", {"subid"}, [](int argn, const char **args) {  //
    CAN_MASTER->pumpStop(kFixBoardId_LiquidCtrl, atoi(args[0]));
  });

  box->newFunc("pumpSetIholdIrunIdelay", {"subid", "ihold", "irun", "idelay"}, [](int argn, const char **args) {  //
    CAN_MASTER->pumpSetIholdIrunIdelay(kFixBoardId_LiquidCtrl, atoi(args[0]), atoi(args[1]), atoi(args[2]), atoi(args[3]));
  });
  // pumpSetTzw
  box->newFunc("pumpSetTzw", {"subid", "tzw"}, [](int argn, const char **args) {  //
    CAN_MASTER->pumpSetTzw(kFixBoardId_LiquidCtrl, atoi(args[0]), atoi(args[1]));
  });

  box->newFunc("pumpSetRamp", {"subid", "vs", "a1", "amx", "v1"}, [](int argn, const char **args) {  //
    CAN_MASTER->pumpSetRamp(kFixBoardId_LiquidCtrl, atoi(args[0]), atoi(args[1]), atoi(args[2]), atoi(args[3]), atoi(args[4]));
  });

  box->newFunc("pumpSetSubicReg", {"subid", "regadd", "val"}, [](int argn, const char **args) {  //
    CAN_MASTER->pumpSetSubicReg(kFixBoardId_LiquidCtrl, atoi(args[0]), atoi(args[1]), atoi(args[2]));
  });

  box->newFunc("pumpGetSubicReg", {"subid", "regadd"}, [](int argn, const char **args) {  //
    int val = CAN_MASTER->pumpGetSubicReg(kFixBoardId_LiquidCtrl, atoi(args[0]), atoi(args[1]));
    ISHOW("val:%x", val);
  });

  box->newFunc("pumpIsRun", {"subid"}, [](int argn, const char **args) {  //
    int val = CAN_MASTER->pumpIsRun(kFixBoardId_LiquidCtrl, atoi(args[0]));
    ISHOW("val:%d", val);
  });
}

void TabBuilder::buildHearterTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "加热器", 4);

  box->newSubButton("加热打开", [this, boardid](int argn, const char **args) { CAN_MASTER->heaterCtrl(boardid, 1); });
  box->newSubButton("加热关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->heaterCtrl(boardid, 0); });

  box->newSubButtonEnd();
  box->newSubButton("加热安全阀打开", [this, boardid](int argn, const char **args) { CAN_MASTER->heaterCtrlSafeValve(boardid, 1); });
  box->newSubButton("加热安全阀关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->heaterCtrlSafeValve(boardid, 0); });
  box->newSubButtonEnd();
  box->newSubButton("读取电流", [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->heaterReadEI(boardid);
    ISHOW("val:%d", val);
  });
  box->newSubButton("读取温度", [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->heaterReadTemperature(boardid);
    ISHOW("val:%d", val);
  });
  box->newSubButton("读取电流ADC", [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->heaterReadEIAdcRaw(boardid);
    ISHOW("val:%d", val);
  });

  box->newSubButton("读取温度Adc", [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->heaterReadTemperatureAdcRaw(boardid);
    ISHOW("val:%d", val);
  });
  box->newSubButton("是否运行", [this, boardid](int argn, const char **args) {
    bool val = CAN_MASTER->heaterIsOpen(boardid);
    ISHOW("val:%d", val);
  });
}
void TabBuilder::buildH2O2SensorTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "H2O2", 4);

  if (boardid >= 0) {
    box->newFunc("H2O2传感器读取校准日期", {}, [boardid](int argn, const char **args) {
      int32_t year, month, day;
      CAN_MASTER->h2o2SensorReadCalibrationDate(boardid, &year, &month, &day);
      ISHOW("year:%d,month:%d,day:%d", year, month, day);
    });
    box->newFunc("H2O2传感器读取IC错误码", {}, [boardid](int argn, const char **args) {
      int val = CAN_MASTER->h2o2SensorReadSubIcErrorcode(boardid);
      ISHOW("val:%d", val);
    });
    box->newFunc("H2O2传感器读取IC寄存器", {"reg", "num"}, [boardid](int argn, const char **args) {
      uint8_t *val = CAN_MASTER->h2o2SensorReadSubIcReg(boardid, atoi(args[0]), atoi(args[1]));
      ISHOW("val:%s", zhex2str(val, atoi(args[1]) * 2).c_str());
    });
  } else {
    box->newFunc("H2O2传感器读取校准日期", {"boardid"}, [this](int argn, const char **args) {
      int32_t year, month, day;
      CAN_MASTER->h2o2SensorReadCalibrationDate(atoi(args[0]), &year, &month, &day);
      ISHOW("year:%d,month:%d,day:%d", year, month, day);
    });
    box->newFunc("H2O2传感器读取IC错误码", {"boardid"}, [this](int argn, const char **args) {
      int val = CAN_MASTER->h2o2SensorReadSubIcErrorcode(atoi(args[0]));
      ISHOW("val:%d", val);
    });
    box->newFunc("H2O2传感器读取IC寄存器", {"boardid", "reg", "num"}, [this](int argn, const char **args) {
      uint8_t *val = CAN_MASTER->h2o2SensorReadSubIcReg(atoi(args[0]), atoi(args[1]), atoi(args[2]));
      ISHOW("val:%s", zhex2str(val, atoi(args[2]) * 2).c_str());
    });
  }
}

void TabBuilder::buildTripleWarningLightTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "三色警报灯", 4);
  box->newFunc("三色指示灯控制", {"r", "g", "b", "warning"}, [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->warningLightSetState(boardid, atoi(args[0]), atoi(args[1]), atoi(args[2]), atoi(args[3]));
  });
  box->newFunc("读取三色指示灯状态", {}, [this, boardid](int argn, const char **args) {
    int r, g, b, warning;
    CAN_MASTER->warningLightReadState(boardid, &r, &g, &b, &warning);
    ISHOW("r:%d,g:%d,b:%d,warning:%d", r, g, b, warning);
  });
}
void TabBuilder::buildWaterSensorTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "水浸", 4);
  box->newSubButton("读取-蒸发桶水浸传感器-状态", [this, boardid](int argn, const char **args) {
    int state = CAN_MASTER->evaporationTankWSReadState(boardid);
    ISHOW("state:%d", state);
  });
  box->newSubButton("读取-设备底部水浸传感器-状态", [this, boardid](int argn, const char **args) {
    int state = CAN_MASTER->bottomWSReadState(boardid);
    ISHOW("state:%d", state);
  });
}
void TabBuilder::buildBlowerTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "风机", 4);
  box->newSubButton("风机打开", [this, boardid](int argn, const char **args) { CAN_MASTER->blowerCtrl(boardid, 1); });
  box->newSubButton("风机关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->blowerCtrl(boardid, 0); });
  box->newSubButtonEnd();
  box->newSubButton("风机安全阀打开", [this, boardid](int argn, const char **args) { CAN_MASTER->blowerCtrlSafeValve(boardid, 1); });
  box->newSubButton("风机安全阀关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->blowerCtrlSafeValve(boardid, 0); });
  box->newSubButtonEnd();
  box->newSubButton("风机读取电流", [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->blowerReadEI(boardid);
    ISHOW("val:%d", val);
  });
  box->newSubButton("风机读取电流ADC", [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->blowerReadEIAdcRaw(boardid);
    ISHOW("val:%d", val);
  });
  box->newSubButtonEnd();
  box->newSubButton("风机是否错误", [this, boardid](int argn, const char **args) {
    bool val = CAN_MASTER->blowerReadElectricIsError(boardid);
    ISHOW("val:%d", val);
  });
  box->newSubButton("风机是否打开", [this, boardid](int argn, const char **args) {
    bool val = CAN_MASTER->blowserIsOpen(boardid);
    ISHOW("val:%d", val);
  });
}

void TabBuilder::buildAirCompressorTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "空压机", 4);
  box->newSubButton("空压机打开", [this, boardid](int argn, const char **args) { CAN_MASTER->airCompressorCtrl(boardid, 1); });
  box->newSubButton("空压机关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->airCompressorCtrl(boardid, 0); });
  box->newSubButtonEnd();
  // box->newFunc("空压机安全阀控制", {"valve_state"}, [this, boardid](int argn, const char **args) { CAN_MASTER->airCompressorCtrlSafeValve(boardid, atoi(args[0])); });
  box->newSubButton("空压机安全阀打开", [this, boardid](int argn, const char **args) { CAN_MASTER->airCompressorCtrlSafeValve(boardid, 1); });
  box->newSubButton("空压机安全阀关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->airCompressorCtrlSafeValve(boardid, 0); });
  box->newSubButtonEnd();
  box->newFunc("空压机读取电流", {}, [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->airCompressorReadEI(boardid);
    ISHOW("val:%d", val);
  });
  box->newFunc("空压机读取电流ADC", {}, [this, boardid](int argn, const char **args) {
    int val = CAN_MASTER->airCompressorReadEIAdcRaw(boardid);
    ISHOW("val:%d", val);
  });
  box->newFunc("空压机是否打开", {}, [this, boardid](int argn, const char **args) {
    bool val = CAN_MASTER->airCompressorIsOpen(boardid);
    ISHOW("val:%d", val);
  });
}

void TabBuilder::buildAirTightnessTestACTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "气密性测试空压机", 4);
  box->newSubButton("打开", [this, boardid](int argn, const char **args) { CAN_MASTER->airTightnessTestACCtrl(boardid, 1); });
  box->newSubButton("关闭", [this, boardid](int argn, const char **args) { CAN_MASTER->airTightnessTestACCtrl(boardid, 0); });
  box->newSubButtonEnd();
  box->newSubButton("是否打开", [this, boardid](int argn, const char **args) {
    bool val = CAN_MASTER->airTightnessTestACIsOpen(boardid);
    ISHOW("val:%d", val);
  });
}
void TabBuilder::buildPSBusTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "PSBus", 4);
  box->newFunc("读数据", {"subid"}, [this, boardid](int argn, const char **args) {
    int32_t val = CAN_MASTER->psBusReadData(boardid, atoi(args[0]));
    ISHOW("val:%d", val);
  });

  box->newSubButton("读取扫描结果", [this, boardid](int argn, const char **args) {
    auto result = CAN_MASTER->psBusScan(boardid);
    for (int i = 0; i < 10; i++) {
      if (result.sensor[i].isOnline) {
        ISHOW("id %d, subid %d, ptype %s, uint %s, precision %d, zero %d, full %d",  //
              i, result.sensor[i].subid, PSType2Str(result.sensor[i].ptype), p100uint2Str(result.sensor[i].uint), result.sensor[i].precision, result.sensor[i].zero, result.sensor[i].full);
      } else {
        ISHOW("id %d, offline", i);
      }
    }
  });

  box->newSubButtonEnd();
  box->newSubButton("开始上报", [this, boardid](int argn, const char **args) { CAN_MASTER->psBusStartReport(boardid, 1000); });
  box->newSubButton("停止上报", [this, boardid](int argn, const char **args) { CAN_MASTER->psBusStopReport(boardid); });
}

void TabBuilder::buildProportionalTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "比例阀", 4);
  box->newFunc("设置比例阀", {"valveId(1->255)", "valveValue(0->255)"}, [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->proportionalSetValve(boardid, atoi(args[0]), atoi(args[1]));
  });
  box->newFunc("读取比例阀位置", {}, [this, boardid](int argn, const char **args) {  //
    int32_t val = CAN_MASTER->proportionalReadPos(boardid);
    ISHOW("val:%d", val);
  });
  box->newFunc("比例阀是否忙", {}, [this, boardid](int argn, const char **args) {  //
    int32_t val = CAN_MASTER->proportionalIsBusy(boardid);
    ISHOW("val:%d", val);
  });
}
void TabBuilder::buildAirTightnessTestTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "气密性测试", 4);
  box->newSubButton("消毒模式", [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->getCanProtocolCom()->callcmd1(boardid, kfn_air_leak_test_set_mode, 0, DEFUALT_OVERTIME);
  });
  box->newSubButton("打气模式", [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->getCanProtocolCom()->callcmd1(boardid, kfn_air_leak_test_set_mode, 1, DEFUALT_OVERTIME);
  });
  box->newSubButton("气压测试模式", [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->getCanProtocolCom()->callcmd1(boardid, kfn_air_leak_test_set_mode, 2, DEFUALT_OVERTIME);
  });
  box->newSubButtonEnd();
  box->newSubButton("读取模式(0:消毒,1:打气,2:气压测试)", [this, boardid](int argn, const char **args) {  //
    shared_ptr<Receipt> receipt = CAN_MASTER->getCanProtocolCom()->callcmd0(boardid, kfn_air_leak_test_get_mode, DEFUALT_OVERTIME);
    ISHOW("val:%d", receipt->getContent(0));
  });
}

void TabBuilder::buildExtChSelectorTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "外部通道选择", 4);
  box->newFunc("设置外部通道(0:消毒 1:降解 2:除湿)", {"ch"}, [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->extChSelectorSetCh(boardid, atoi(args[0]));
  });
  box->newFunc("读取外部通道", {}, [this, boardid](int argn, const char **args) {  //
    int val = CAN_MASTER->extChSelectorGetCh(boardid);
    ISHOW("val:%d", val);
  });
}

void TabBuilder::buildValveCtrlTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "电磁阀", 4);
  box->newFunc("加液进气电磁阀(打开，可以正常加液排液，关闭后加液泵倒转可以排空管路)", {"open(1)/cloce(0)"}, [this, boardid](int argn, const char **args) {  //
    CAN_MASTER->getCanProtocolCom()->callcmd1(boardid, kfn_set_add_fluid_channel_selector_valve, atoi(args[0]), DEFUALT_OVERTIME);
  });
}

// void TabBuilder::buildValveCtrlTab(const char *tabname, int boardid) {
//   ZQVTabPage        *tab = getTab(tabname);
//   ZQFunctionListBox *box = new ZQFunctionListBox(tab, "电磁阀", 4);
//   box->newFunc("加液进气电磁阀(打开，可以正常加液排液，关闭后加液泵倒转可以排空管路)", {"open(1)/cloce(0)"}, [this, boardid](int argn, const char **args) {  //
//     CAN_MASTER->getCanProtocolCom()->callcmd1(boardid, kfn_set_add_fluid_channel_selector_valve, atoi(args[0]), DEFUALT_OVERTIME);
//   });
// }


void TabBuilder::buildLiquidLevelStateReaderTab(const char *tabname, int boardid) {
  ZQVTabPage        *tab = getTab(tabname);
  ZQFunctionListBox *box = new ZQFunctionListBox(tab, "液位(IO版)状态读取", 4);
  box->newFunc("读取状态(如果是IO0:低液位,IO1:中液位,IO2:高液位)", {}, [this, boardid](int argn, const char **args) {  //
    shared_ptr<Receipt> receipt = CAN_MASTER->getCanProtocolCom()->callcmd0(boardid, kfn_liquid_level_read_io_state,  DEFUALT_OVERTIME);
    ISHOW("IO0:%d", receipt->getContent(0) & 0x01);
    ISHOW("IO1:%d", (receipt->getContent(0) >> 1) & 0x01);
    ISHOW("IO2:%d", (receipt->getContent(0) >> 2) & 0x01);
  });
}

void TabBuilder::buildEnd() {
  for (auto &it : tabMap) {
    it.second->addSpacer();
  }
}