libxsync/xsync_regs.hpp

#pragma once
#include <fstream>
#include <functional>
#include <iostream>
#include <list>
#include <map>
#include <memory>
#include <set>
#include <sstream>
#include <string>
#include <vector>
namespace xsync {
namespace reg {
using namespace std;

#define REG_ADD_OFF_STM32     (0x0000)
#define REG_ADD_OFF_FPGA_TEST (0x00020)
// 控制中心寄存器地址
#define REG_ADD_OFF_SIG_GENERATOR (0x00030)
// 输入组件
#define REG_ADD_OFF_TTLIN1      (0x0100)
#define REG_ADD_OFF_TTLIN2      (0x0110)
#define REG_ADD_OFF_TTLIN3      (0x0120)
#define REG_ADD_OFF_TTLIN4      (0x0130)
#define REG_ADD_OFF_TIMECODE_IN (0x0140)
#define REG_ADD_OFF_GENLOCK_IN  (0x0150)
// 输出组件
#define REG_ADD_OFF_TTLOUT1      (0x0200)
#define REG_ADD_OFF_TTLOUT2      (0x0210)
#define REG_ADD_OFF_TTLOUT3      (0x0220)
#define REG_ADD_OFF_TTLOUT4      (0x0230)
#define REG_ADD_OFF_TIMECODE_OUT (0x0240)
#define REG_ADD_OFF_GENLOCK_OUT  (0x0250)
#define REG_ADD_OFF_STM32_IF     (0x0260)
// 调试组件
#define REG_ADD_OFF_DEBUGER (0x0300)
typedef enum {
  /**
   * @brief
   *  REG 0(16)  设备信息基础寄存器
   */
  ksoftware_version = 0,
  kmanufacturer0    = 1,
  kmanufacturer1    = 2,
  kproduct_type_id  = 3,
  ksn_id0           = 4,
  ksn_id1           = 5,
  ksn_id2           = 6,
  kmac0             = 7,
  kmac1             = 8,

  /**
   * @brief
   *  REG 16(32)  STM32配置寄存器0
   */
  kstm32_obtaining_ip_mode        = REG_ADD_OFF_STM32 + 0,
  kstm32_ip                       = REG_ADD_OFF_STM32 + 1,
  kstm32_gw                       = REG_ADD_OFF_STM32 + 2,
  kstm32_netmask                  = REG_ADD_OFF_STM32 + 3,
  kstm32_camera_sync_signal_count = REG_ADD_OFF_STM32 + 4,  // 写任意数值之后清零
  kstm32_config0                  = REG_ADD_OFF_STM32 + 5,  // bit0: timecode report enable, bit1: camera sync report enable

  kstm32_action0     = REG_ADD_OFF_STM32 + 14,  // action reg
  kstm32_action_val0 = REG_ADD_OFF_STM32 + 15,  // action val reg

  /**
   * @brief
   *  REG 48(32)  FPGA配置寄存器0
   */
  kfpga_test_reg0 = REG_ADD_OFF_FPGA_TEST + 0,
  kfpga_test_reg1 = REG_ADD_OFF_FPGA_TEST + 1,
  kfpga_test_reg2 = REG_ADD_OFF_FPGA_TEST + 2,
  kfpga_test_reg3 = REG_ADD_OFF_FPGA_TEST + 3,
  kfpga_test_reg4 = REG_ADD_OFF_FPGA_TEST + 4,
  kfpga_test_reg5 = REG_ADD_OFF_FPGA_TEST + 5,
  kfpga_test_reg6 = REG_ADD_OFF_FPGA_TEST + 6,
  kfpga_test_reg7 = REG_ADD_OFF_FPGA_TEST + 7,
  kfpga_test_reg8 = REG_ADD_OFF_FPGA_TEST + 8,
  kfpga_test_reg9 = REG_ADD_OFF_FPGA_TEST + 9,
  kfpga_test_rega = REG_ADD_OFF_FPGA_TEST + 10,
  kfpga_test_regb = REG_ADD_OFF_FPGA_TEST + 11,
  kfpga_test_regc = REG_ADD_OFF_FPGA_TEST + 12,
  kfpga_test_regd = REG_ADD_OFF_FPGA_TEST + 13,
  kfpga_test_rege = REG_ADD_OFF_FPGA_TEST + 14,
  kfpga_test_regf = REG_ADD_OFF_FPGA_TEST + 15,
  /**
   * @brief TTL输出模块
   */
  kttlout1_input_sig_slt       = REG_ADD_OFF_TTLOUT1 + 0,
  kttlout1_output_sig_slt      = REG_ADD_OFF_TTLOUT1 + 1,
  kttlout1_config              = REG_ADD_OFF_TTLOUT1 + 2,
  kttlout1_pulse_mode_duration = REG_ADD_OFF_TTLOUT1 + 3,
  kttlout1_pulse_mode_delay    = REG_ADD_OFF_TTLOUT1 + 4,

  kttlout2_input_sig_slt       = REG_ADD_OFF_TTLOUT2 + 0,
  kttlout2_output_sig_slt      = REG_ADD_OFF_TTLOUT2 + 1,
  kttlout2_config              = REG_ADD_OFF_TTLOUT2 + 2,
  kttlout2_pulse_mode_duration = REG_ADD_OFF_TTLOUT2 + 3,
  kttlout2_pulse_mode_delay    = REG_ADD_OFF_TTLOUT2 + 4,

  kttlout3_input_sig_slt       = REG_ADD_OFF_TTLOUT3 + 0,
  kttlout3_output_sig_slt      = REG_ADD_OFF_TTLOUT3 + 1,
  kttlout3_config              = REG_ADD_OFF_TTLOUT3 + 2,
  kttlout3_pulse_mode_duration = REG_ADD_OFF_TTLOUT3 + 3,
  kttlout3_pulse_mode_delay    = REG_ADD_OFF_TTLOUT3 + 4,

  kttlout4_input_sig_slt       = REG_ADD_OFF_TTLOUT4 + 0,
  kttlout4_output_sig_slt      = REG_ADD_OFF_TTLOUT4 + 1,
  kttlout4_config              = REG_ADD_OFF_TTLOUT4 + 2,
  kttlout4_pulse_mode_duration = REG_ADD_OFF_TTLOUT4 + 3,
  kttlout4_pulse_mode_delay    = REG_ADD_OFF_TTLOUT4 + 4,

  /**
   * @brief 信号发生器模块
   */
  kSigGenerator_ctl                 = REG_ADD_OFF_SIG_GENERATOR + 0,   // 控制模式选择寄存器
  kSigGenerator_genlock_format      = REG_ADD_OFF_SIG_GENERATOR + 2,   // genlock格式寄存器
  kSigGenerator_timecode_format     = REG_ADD_OFF_SIG_GENERATOR + 3,   // timecode格式寄存器
  kSigGenerator_control_trigger_reg = REG_ADD_OFF_SIG_GENERATOR + 4,   // StartSigCtrl[0]
  kSigGenerator_timecode0           = REG_ADD_OFF_SIG_GENERATOR + 6,   // timecode0 
  kSigGenerator_timecode1           = REG_ADD_OFF_SIG_GENERATOR + 7,   // timecode1 
  kSigGenerator_timecode_start0     = REG_ADD_OFF_SIG_GENERATOR + 8,   // 时码启动寄存器0
  kSigGenerator_timecode_start1     = REG_ADD_OFF_SIG_GENERATOR + 9,   // 时码启动寄存器1
  kSigGenerator_work_state          = REG_ADD_OFF_SIG_GENERATOR + 12,  // 工作状态 read only

} RegAdd_t;

}  // namespace reg
}  // namespace xsync