#pragma once
#include "iflytop_canbus_protocol/iflytop_canbus_protocol.hpp"

/***********************************************************************************************************************
 *                                                     SDK_CONFIG                                                      *
 ***********************************************************************************************************************/
#define SDK_DELAY_US_TIMER              htim6       //  微秒延迟定时器，注意该延时定时器需要按照以下文档进行配置 http://192.168.1.3:3000/zwikipedia/iflytop_wikipedia/src/branch/master/doc/stm32cubemx_us_timer.md
#define SDK_IRQ_PREEMPTPRIORITY_DEFAULT 5           // IO中断默认中断等级
#define SDK_CFG__CFG_FLASH_ADDR         0x080C0000  //
#define SDK_CFG__SN_FLASH_ADDR          0x080E0000  //
#define SDK_MAX_TASK                    10

/***********************************************************************************************************************
 *                                                   PROJECT_CONFIG                                                    *
 ***********************************************************************************************************************/

/**
 * @brief 基础配置
 *
 */
#define SOFTWARE_VERSION 1                                                // 软件版本
#define HARDWARE_VERSION 1                                                // 硬件版本
#define PROJECT          "large_space_disinfection__power_control_board"  // 工程名称
#define SN_HEADER        "SN"                                             // SN号前缀
#define DEVICE_ID        (kFixBoardId_PowerControl)                       // 设备ID
#define PROJECT_ID       klarge_space_disinfection_machine                // 项目ID
#define BOARD_TYPE       kBoardType_PowerControl                          // 板子类型
#define DEBUG_UART       huart1                                           // 调试串口
#define DEBUG_LIGHT_GPIO PE8                                              // 调试指示灯

#define HEATER_CTRL_GPIO               PC6
#define HEATER_SAFE_CTRL_GPIO          PC7
#define HEATER_ELECTRIC_CURRENT_ADC_CH ADC_CHANNEL_0
#define HEATER_TEMPERATURE_ADC_CH      ADC_CHANNEL_8

#define BLOWER_CTRL_GPIO               PC4
#define BLOWER_SAFE_CTRL_GPIO          PC5
#define BLOWER_ELECTRIC_CURRENT_ADC_CH ADC_CHANNEL_1

#define AIRCOMPRESSOR_CTRL_GPIO               PC2
#define AIRCOMPRESSOR_SAFE_CTRL_GPIO          PC3
#define AIRCOMPRESSOR_ELECTRIC_CURRENT_ADC_CH ADC_CHANNEL_2

#define H2O2_SENSOR_TYPE_HPP272
// #define H2O2_SENSOR_TYPE_HMP110