|
|
#pragma once
#include <stdint.h>
namespace iflytop {namespace zcr {typedef enum {#if 0
virtual int32_t board_reset() = 0;#endif
kboard_reset = 0x0000, //{} {}
kevent_bus_reg_change_report = 0x0064, //{regindex,oldval,toval}
kmodule_ping = 0x0101, kmodule_stop = 0x0102,
kmodule_get_error = 0x0110, kmodule_get_detail_errorcode = 0x0111, kmodule_clear_error = 0x0112,
kmodule_set_reg = 0x0120, kmodule_get_reg = 0x0121, kmodule_reset_reg = 0x0123,
kmodule_get_version = 0x0130, kmodule_get_type = 0x0131, kmodule_get_status = 0x0132,
// kmodule_ping = 0x0100, //
// kmodule_stop = 0x0101, //
// kmodule_enable = 0x0102, //
// kmodule_clear_error = 0x0103, //
// kmodule_active_cfg = 0x0104, //
// kmodule_reset_reg = 0x0105, //
// kmodule_set_reg = 0x0106, //(int32_t index,int32_t val)->()
// kmodule_get_reg = 0x0107, //(int32_t index)->(int32_t val)
// kmodule_get_version = 0x0150, //()->int32_t
// kmodule_get_type = 0x0151, //()->int32_t
// kmodule_get_status = 0x0153, //{}{int32_t}
// kmodule_get_error = 0x0154, //
// kmodule_get_detail_errorcode = 0x0155, //()->int32_t
//
kxymotor_enable = 0x0301, //
kxymotor_move_by = 0x0302, //
kxymotor_move_to = 0x0303, //
kxymotor_move_to_zero = 0x0304, //
kxymotor_read_pos = 0x0306, //
kxymotor_read_inio_index_in_stm32 = 0x0307, //
kxymotor_read_inio = 0x0308, //
kxymotor_set_pos = 0x0309, //
kxymotor_motor_move_by_direct = 0x030a, //
kxymotor_read_enc_direct = 0x030b, //
ka8000_optical_read_raw = 0x0609, //
ka8k_opt_v2_t_start_scan = 0x0700, //(int32_t scanDirection, int32_t lasterGain,int32_t scanGain)
ka8k_opt_v2_f_start_scan = 0x0701, //(int32_t scanDirection, int32_t lasterGain,int32_t scanGain)
ka8k_opt_v2_t_open_laster = 0x070a, //(int32_t lasterGain,int32_t scanGain) for_debug
ka8k_opt_v2_t_close_laster = 0x070b, //() for_debug
ka8k_opt_v2_t_readVal = 0x070c, //(int32_t *val0,int32_t *val1) for_debug
ka8k_opt_v2_f_open_laster = 0x070d, //(int32_t lasterGain,int32_t scanGain) for_debug
ka8k_opt_v2_f_close_laster = 0x070e, //() for_debug
ka8k_opt_v2_f_readVal = 0x070f, //(int32_t *val0,int32_t *val1) for_debug
ka8k_opt_v2_barcode_start_scan = 0x0702, //(int32_t lasterGain,int32_t scanGain,int32_t startpos,int32_t intervalstep)
kstep_motor_enable = 0x0201, //
kstep_motor_read_pos = 0x020b, //
kstep_motor_read_enc_pos = 0x020c, //
kstep_motor_easy_rotate = 0x0211, //
kstep_motor_easy_move_by = 0x0212, //
kstep_motor_easy_move_to = 0x0213, //
kstep_motor_easy_move_to_zero = 0x0214, //
kstep_motor_easy_set_current_pos = 0x0215, //
kstep_motor_easy_move_to_io = 0x0216, //
kstep_motor_stop = 0x0228, //
kstep_motor_active_cfg = 0x0229, //
kstep_motor_read_io_state = 0x022a, //
kstep_motor_easy_move_to_end_point = 0x022c, //
kstep_motor_read_tmc5130_status = 0x0232, //
kstep_motor_read_tmc5130_state = 0x0233, //
kstep_motor_read_io_index_in_stm32 = 0x0238, //
kstep_motor_set_subdevice_reg = 0x0239, //
kstep_motor_get_subdevice_reg = 0x023a, //
kstep_motor_easy_reciprocating_motion = 0x022d, //
kstep_motor_easy_move_to_zero_point_quick = 0x022e, //
kmini_servo_enable = 0x6601, //
kmini_servo_read_pos = 0x6602, //
kmini_servo_active_cfg = 0x6603, //
kmini_servo_stop = 0x6604, //
kmini_servo_set_mid_point = 0x6607, //
kmini_servo_read_io_state = 0x6608, //
kmini_servo_move_to = 0x6609, //
kmini_servo_rotate = 0x660a, //
kmini_servo_rotate_with_torque = 0x660b, //
kmini_servo_set_cur_pos = 0x660c, //
kextboard_read_inio = 0x6701, // para:{index}, ack:{state}
kextboard_write_outio = 0x6702, // para:{index,state}, ack:{}
kextboard_read_muti_inio = 0x6703, // para:{}, ack:{states}
kextboard_read_inio_index_in_stm32 = 0x6704, // para:{index}, ack:{index_in_stm32}
kextboard_read_outio_index_in_stm32 = 0x6705, // para:{index}, ack:{index_in_stm32}
kextboard_read_outio = 0x6706, // para:{index}, ack:{state}
kcode_scaner_start_scan = 0x6801, // para:{}, ack:{}
kcode_scaner_stop_scan = 0x6802, // para:{}, ack:{}
kcode_scaner_result_is_ready = 0x6803, // para:{}, ack:{}
kcode_scaner_read_scaner_result = 0x6804, // para:{}, ack:{X}
kcode_scaner_get_result_length = 0x6805, // para:{}, ack:{X}
kfan_controler_set_speed = 0x6900, //
ktemp_controler_start_hearting = 0x7000, //
ktemp_controler_stop_hearting = 0x7001, //
ktemp_controler_set_peltier_power_level = 0x7002, //
ktemp_controler_set_pump_level = 0x7003, //
ktemp_controler_set_fan_level = 0x7004, //
ktemp_controler_enable_log = 0x7005, //
ka8000_idcard_reader_read_raw = 0x7100, //
ka8000_idcard_write_raw = 0x7101, //
ka8000_idcard_erase = 0x7102, //
ka8000_idcard_earse_unlock = 0x7103, //
kevent_a8000_idcard_online = 0x71c8, //
kevent_a8000_idcard_offline = 0x71c9, //
kplate_code_scaner_push_card_and_scan = 0x7301, //
kplate_code_scaner_stop_scan = 0x7302, //
kplate_code_scaner_read_result = 0x7303, //
kplate_code_scaner_read_result_point_num = 0x7304, //
kplate_code_scaner_read_code = 0x7305, //
kplate_code_scaner_adc_readraw = 0x7306, //
kplate_code_scaner_open_laser = 0x7307, //
kplate_code_scaner_close_laser = 0x7308, //
/***********************************************************************************************************************
* 移液枪 * ***********************************************************************************************************************/ kpipette_zmotor_enable = 0x7400, kpipette_zmotor_move_zero = 0x7401, kpipette_zmotor_move_to_zero_point_quick = 0x7402, kpipette_zmotor_measure_distance = 0x7403, kpipette_zmotor_read_measure_distance_result = 0x7404, kpipette_zmotor_move_by = 0x7405, kpipette_zmotor_move_to = 0x7406,
kliquid_operation_clear_params = 0x7450, kliquid_operation_set_gun_runparams = 0x7451, kliquid_operation_set_zmotor_runparams = 0x7452, kliquid_operation_enable_lld_record = 0x7453, kliquid_operation_fresh_params = 0x7454,
kpipette_init_device = 0x7501, kpipette_put_tip = 0x7502, kpipette_pump_move_to = 0x7503, kpipette_lld = 0x7504, kpipette_aspirate = 0x7505, kpipette_distribu = 0x7506, kpipette_shake_up = 0x7507, kpipette_clear_hanging_liquid = 0x7508, kpipette_lld_is_detect_liquid = 0x7509,
kpipette_get_sensor_sample_data = 0x7510, kpipette_get_sensor_sample_data_num = 0x7511, kpipette_zmotor_read_zero_point_state = 0x7512, kpipette_zmotor_read_dev_status_cache = 0x7513,
} cmdid_t;
typedef struct { int index; const char* fnname;} cmdinfo_t;
const char* cmdid2str(int32_t code);cmdinfo_t* cmdid_get_table();int cmdid_get_table_size();
} // namespace zcr
} // namespace iflytop
|
