|
|
|
@ -31,6 +31,8 @@ |
|
|
|
} \ |
|
|
|
} |
|
|
|
|
|
|
|
#define THREAD_START_WORK(...) thread_start_work(__FUNCTION__, __VA_ARGS__)
|
|
|
|
|
|
|
|
#define PIPETTE_PREPARE_POS 800
|
|
|
|
#define LLD_PREPARE_DISTRIBUT_POS 100
|
|
|
|
#define LLF_DPOS 1000
|
|
|
|
@ -57,33 +59,34 @@ void PipetteModuleV2::initialize(int32_t id, config_t *config, hardward_config_t |
|
|
|
|
|
|
|
m_zm = hardwaredcfg->zmotor; |
|
|
|
m_zm0p = hardwaredcfg->zmotor_0point; |
|
|
|
|
|
|
|
m_zm->getGState(); // 读取状态，清空下复位标识
|
|
|
|
module_active_cfg(); |
|
|
|
} |
|
|
|
|
|
|
|
void PipetteModuleV2::create_default_cfg(config_t *defaultcfg) { |
|
|
|
static config_t cfg; |
|
|
|
|
|
|
|
cfg.limit_ul = 200; |
|
|
|
cfg.pump_acc = 14; |
|
|
|
cfg.pump_dec = 14; |
|
|
|
cfg.pump_vstart = 0; |
|
|
|
cfg.pump_vstop = 900; |
|
|
|
cfg.aspirate_pump_vel = 500; //
|
|
|
|
cfg.pump_vmax = 1000; |
|
|
|
cfg.aspirate_zmotor_max_move_by = 400; // 50mm,tip头的长度
|
|
|
|
cfg.lld_pump_vel = 100; // lld推荐使用速度为50->200,这里
|
|
|
|
cfg.lld_motor_vel_rpm = 200; |
|
|
|
cfg.lld_detect_period_ms = 10; // 100ms
|
|
|
|
cfg.lld_prepare_pos = PIPETTE_PREPARE_POS; |
|
|
|
cfg.lld_prepare_pre_distribut_ul = LLD_PREPARE_DISTRIBUT_POS; |
|
|
|
|
|
|
|
cfg.zm_one_circle_pulse = 10000; |
|
|
|
cfg.zm_one_circle_pulse_denominator = 1; |
|
|
|
cfg.zm_ihold = 1; |
|
|
|
cfg.zm_irun = 3; |
|
|
|
cfg.zm_iholddelay = 100; |
|
|
|
cfg.zm_default_velocity = 500; |
|
|
|
cfg.zm_run_to_zero_speed = 100; |
|
|
|
cfg.zm_look_zero_edge_speed = 100; |
|
|
|
defaultcfg->limit_ul = 200; |
|
|
|
defaultcfg->pump_acc = 14; |
|
|
|
defaultcfg->pump_dec = 14; |
|
|
|
defaultcfg->pump_vstart = 0; |
|
|
|
defaultcfg->pump_vstop = 900; |
|
|
|
defaultcfg->aspirate_pump_vel = 500; //
|
|
|
|
defaultcfg->pump_vmax = 1000; |
|
|
|
defaultcfg->aspirate_zmotor_max_move_by = 400; // 50mm,tip头的长度
|
|
|
|
defaultcfg->lld_pump_vel = 100; // lld推荐使用速度为50->200,这里
|
|
|
|
defaultcfg->lld_motor_vel_rpm = 200; |
|
|
|
defaultcfg->lld_detect_period_ms = 10; // 100ms
|
|
|
|
defaultcfg->lld_prepare_pos = PIPETTE_PREPARE_POS; |
|
|
|
defaultcfg->lld_prepare_pre_distribut_ul = LLD_PREPARE_DISTRIBUT_POS; |
|
|
|
|
|
|
|
defaultcfg->zm_one_circle_pulse = 10000; |
|
|
|
defaultcfg->zm_one_circle_pulse_denominator = 1; |
|
|
|
defaultcfg->zm_ihold = 1; |
|
|
|
defaultcfg->zm_irun = 3; |
|
|
|
defaultcfg->zm_iholddelay = 100; |
|
|
|
defaultcfg->zm_default_velocity = 500; |
|
|
|
defaultcfg->zm_run_to_zero_speed = 100; |
|
|
|
defaultcfg->zm_look_zero_edge_speed = 100; |
|
|
|
} |
|
|
|
int32_t PipetteModuleV2::getid(int32_t *id) { |
|
|
|
*id = m_id; |
|
|
|
@ -94,9 +97,9 @@ int32_t PipetteModuleV2::module_stop() { |
|
|
|
return 0; |
|
|
|
} |
|
|
|
int32_t PipetteModuleV2::module_active_cfg() { |
|
|
|
DO(m_smtp2.pump_set_acc_and_dec(m_cfg.pump_acc, m_cfg.pump_dec)); |
|
|
|
DO(m_smtp2.pump_set_vstart(m_cfg.pump_vstart)); |
|
|
|
DO(m_smtp2.pump_set_vstop(m_cfg.pump_vstop)); |
|
|
|
m_smtp2.pump_set_acc_and_dec(m_cfg.pump_acc, m_cfg.pump_dec); |
|
|
|
m_smtp2.pump_set_vstart(m_cfg.pump_vstart); |
|
|
|
m_smtp2.pump_set_vstop(m_cfg.pump_vstop); |
|
|
|
|
|
|
|
m_zm->enable(false); |
|
|
|
m_zm->setIHOLD_IRUN(m_cfg.zm_ihold, m_cfg.zm_irun, m_cfg.zm_iholddelay); |
|
|
|
@ -133,7 +136,7 @@ int32_t PipetteModuleV2::module_active_cfg() { |
|
|
|
} break; |
|
|
|
|
|
|
|
#define XXX_STATE_REG(statekey, action) PROCESS_REG(statekey, action, ACTION_NONE)
|
|
|
|
int32_t PipetteModuleV2::_module_xxx_reg(int32_t param_id, bool read, int32_t &val) { |
|
|
|
int32_t PipetteModuleV2::module_xxx_reg_impl(int32_t param_id, bool read, int32_t &val) { |
|
|
|
switch (param_id) { |
|
|
|
/***********************************************************************************************************************
|
|
|
|
* STATE * |
|
|
|
@ -196,7 +199,7 @@ int32_t PipetteModuleV2::_module_xxx_reg(int32_t param_id, bool read, int32_t &v |
|
|
|
} |
|
|
|
|
|
|
|
int32_t PipetteModuleV2::module_xxx_reg(int32_t param_id, bool read, int32_t &val) { |
|
|
|
int32_t retval = _module_xxx_reg(param_id, read, val); |
|
|
|
int32_t retval = module_xxx_reg_impl(param_id, read, val); |
|
|
|
if (retval == 0 && m_config_update) { |
|
|
|
module_active_cfg(); |
|
|
|
} |
|
|
|
@ -209,7 +212,7 @@ int32_t PipetteModuleV2::module_xxx_reg(int32_t param_id, bool read, int32_t &va |
|
|
|
***********************************************************************************************************************/ |
|
|
|
|
|
|
|
int32_t PipetteModuleV2::pipette_zmotor_enable(int32_t enable) { |
|
|
|
ZLOGI(TAG, "m%d pipette_zmotor_enable %ld", m_id, enable); |
|
|
|
// ZLOGI(TAG, "m%d pipette_zmotor_enable %ld", m_id, enable);
|
|
|
|
m_thread.stop(); |
|
|
|
m_zm->enable(enable); |
|
|
|
m_state.enable = enable; |
|
|
|
@ -225,12 +228,10 @@ int32_t PipetteModuleV2::pipette_zmotor_enable(int32_t enable) { |
|
|
|
* @return int32_t |
|
|
|
*/ |
|
|
|
int32_t PipetteModuleV2::pipette_zmotor_move_zero() { //
|
|
|
|
thread_start_work([this]() { |
|
|
|
THREAD_START_WORK([this]() { |
|
|
|
do_zm_move_0p(); // 移动到零点
|
|
|
|
if (creg.module_errorcode != 0) { // 计算并更新零点坐标
|
|
|
|
zm_set_now_pos(0 + m_cfg.zm_dzero - m_cfg.zm_io_trigger_append_distance); |
|
|
|
m_state.has_move_to_zero = 1; |
|
|
|
} |
|
|
|
}); |
|
|
|
return 0; |
|
|
|
} |
|
|
|
@ -241,14 +242,14 @@ int32_t PipetteModuleV2::pipette_zmotor_move_zero() { // |
|
|
|
* @return int32_t |
|
|
|
*/ |
|
|
|
int32_t PipetteModuleV2::pipette_zmotor_measure_distance() { |
|
|
|
thread_start_work([this]() { |
|
|
|
THREAD_START_WORK([this]() { |
|
|
|
int32_t startpos = zm_get_now_pos(); |
|
|
|
do_zm_move_0p(); // 移动到零点
|
|
|
|
int32_t dpos = zm_get_now_pos() - startpos; |
|
|
|
if (creg.module_errorcode != 0) { // 计算并更新零点坐标
|
|
|
|
|
|
|
|
zm_set_now_pos(0 + m_cfg.zm_dzero - m_cfg.zm_io_trigger_append_distance); |
|
|
|
m_state.has_move_to_zero = 1; |
|
|
|
} |
|
|
|
|
|
|
|
m_asynchronous_result.result0 = 0 + m_cfg.zm_dzero - m_cfg.zm_io_trigger_append_distance - dpos; |
|
|
|
}); |
|
|
|
return 0; |
|
|
|
@ -271,7 +272,8 @@ int32_t PipetteModuleV2::pipette_zmotor_read_measure_distance_result(int32_t *re |
|
|
|
* @return int32_t |
|
|
|
*/ |
|
|
|
int32_t PipetteModuleV2::pipette_zmotor_move_by(int32_t distance) { |
|
|
|
thread_start_work([this, distance]() { |
|
|
|
THREAD_START_WORK([this, distance]() { |
|
|
|
module_active_cfg(); |
|
|
|
zm_move_by(distance, m_cfg.zm_default_velocity); |
|
|
|
zm_waitfor_stop(); |
|
|
|
}); |
|
|
|
@ -284,11 +286,10 @@ int32_t PipetteModuleV2::pipette_zmotor_move_by(int32_t distance) { |
|
|
|
* @return int32_t |
|
|
|
*/ |
|
|
|
int32_t PipetteModuleV2::pipette_zmotor_move_to(int32_t tox) { |
|
|
|
if (m_state.has_move_to_zero == 0) return err::kstep_motor_not_move_to_zero; |
|
|
|
if (m_cfg.zm_min_d != 0 && tox < m_cfg.zm_min_d) tox = m_cfg.zm_min_d; |
|
|
|
if (m_cfg.zm_max_d != 0 && tox > m_cfg.zm_max_d) tox = m_cfg.zm_max_d; |
|
|
|
|
|
|
|
thread_start_work([this, tox]() { |
|
|
|
THREAD_START_WORK([this, tox]() { |
|
|
|
zm_move_to(tox, m_cfg.zm_default_velocity); |
|
|
|
zm_waitfor_stop(); |
|
|
|
}); |
|
|
|
@ -301,13 +302,12 @@ int32_t PipetteModuleV2::pipette_zmotor_move_to(int32_t tox) { |
|
|
|
* @return int32_t |
|
|
|
*/ |
|
|
|
int32_t PipetteModuleV2::pipette_zmotor_move_to_zero_point_quick() { |
|
|
|
if (m_state.has_move_to_zero == 0) return err::kstep_motor_not_move_to_zero; |
|
|
|
thread_start_work([this]() { do_pipette_zmotor_move_to_zero_point_quick(); }); |
|
|
|
THREAD_START_WORK([this]() { do_pipette_zmotor_move_to_zero_point_quick(); }); |
|
|
|
return 0; |
|
|
|
} |
|
|
|
|
|
|
|
int32_t PipetteModuleV2::pipette_init_device() { |
|
|
|
thread_start_work([this]() { |
|
|
|
THREAD_START_WORK([this]() { |
|
|
|
DO_IN_THREAD(m_smtp2.pump_init(m_cfg.pump_vmax)); |
|
|
|
pump_waitfor_stop(); |
|
|
|
//
|
|
|
|
@ -319,14 +319,14 @@ int32_t PipetteModuleV2::pipette_init_device() { |
|
|
|
} |
|
|
|
|
|
|
|
int32_t PipetteModuleV2::pipette_put_tip() { |
|
|
|
thread_start_work([this]() { DO_IN_THREAD(m_smtp2.pump_put_tip()); }); |
|
|
|
THREAD_START_WORK([this]() { DO_IN_THREAD(m_smtp2.pump_put_tip()); }); |
|
|
|
return 0; |
|
|
|
} |
|
|
|
|
|
|
|
int32_t PipetteModuleV2::pipette_lld_prepare() { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
thread_start_work([this]() { |
|
|
|
THREAD_START_WORK([this]() { |
|
|
|
DO_IN_THREAD(m_smtp2.pump_move_to_ul(m_cfg.pump_vmax, m_cfg.lld_prepare_pos)); // 移动到中点
|
|
|
|
pump_waitfor_stop(); |
|
|
|
m_state.lld_prepared = 1; |
|
|
|
@ -342,7 +342,7 @@ int32_t PipetteModuleV2::pipette_lld(int32_t lldtype, int32_t zdpos, int32_t c_t |
|
|
|
DO(m_smtp2.pump_get_tip_state(&tipstate)); |
|
|
|
if (tipstate != 0) return err::kpipette_error_tipisload_when_lld_prepare; |
|
|
|
|
|
|
|
thread_start_work([this, lldtype, zdpos, c_threshold, p_threshold]() { //
|
|
|
|
THREAD_START_WORK([this, lldtype, zdpos, c_threshold, p_threshold]() { //
|
|
|
|
m_state.lld_prepared = 0; // 失效m_state.lld_prepared
|
|
|
|
|
|
|
|
int32_t start_capacitance = 0; // 启动时电容数值
|
|
|
|
@ -434,7 +434,7 @@ int32_t PipetteModuleV2::pipette_lld(int32_t lldtype, int32_t zdpos, int32_t c_t |
|
|
|
int32_t PipetteModuleV2::pipette_aspirate_prepare() { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
thread_start_work([this]() { //
|
|
|
|
THREAD_START_WORK([this]() { //
|
|
|
|
ZLOGI(TAG, "pipette_aspirate_prepare"); |
|
|
|
m_state.aspirate_cfg_eigen_time = 0; |
|
|
|
m_state.aspirate_cfg_p_thre = 0; |
|
|
|
@ -471,7 +471,7 @@ int32_t PipetteModuleV2::pipette_aspirate_set_operation_verifi_tolerance(int32_t |
|
|
|
int32_t PipetteModuleV2::pipette_aspirate(int32_t ul) { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
thread_start_work([this, ul]() { |
|
|
|
THREAD_START_WORK([this, ul]() { |
|
|
|
m_state.lld_prepared = 0; |
|
|
|
|
|
|
|
DO_IN_THREAD(m_smtp2.pump_move_to_ul(m_cfg.pump_vmax, ASPIRATE_POS)); |
|
|
|
@ -499,7 +499,7 @@ int32_t PipetteModuleV2::pipette_aspirate(int32_t ul) { |
|
|
|
int32_t PipetteModuleV2::pipette_aspirate_and_verify(int32_t ul) { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
thread_start_work([this, ul]() { |
|
|
|
THREAD_START_WORK([this, ul]() { |
|
|
|
m_state.lld_prepared = 0; |
|
|
|
|
|
|
|
// zmotor and pump move
|
|
|
|
@ -523,7 +523,7 @@ int32_t PipetteModuleV2::pipette_aspirate_and_verify(int32_t ul) { |
|
|
|
int32_t PipetteModuleV2::pipette_shake_up(int32_t ul, int32_t times) { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
thread_start_work([this, ul, times]() { |
|
|
|
THREAD_START_WORK([this, ul, times]() { |
|
|
|
//
|
|
|
|
int32_t dpos = 0; |
|
|
|
|
|
|
|
@ -564,7 +564,7 @@ int32_t PipetteModuleV2::pipette_shake_up(int32_t ul, int32_t times) { |
|
|
|
int32_t PipetteModuleV2::pipette_aspirate_infer_pressure(int32_t ul) { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
thread_start_work([this, ul]() { |
|
|
|
THREAD_START_WORK([this, ul]() { |
|
|
|
//
|
|
|
|
ZLOGI(TAG, "pipette_aspirate_infer_pressure %d", ul); |
|
|
|
m_asynchronous_result.result0 = 0; |
|
|
|
@ -583,7 +583,7 @@ int32_t PipetteModuleV2::pipette_aspirate_infer_eigen_time(int32_t ul) { |
|
|
|
if (m_state.pipette_is_inited == 0) return err::kpipette_error_uninited; |
|
|
|
|
|
|
|
//
|
|
|
|
thread_start_work([this, ul]() { |
|
|
|
THREAD_START_WORK([this, ul]() { |
|
|
|
//
|
|
|
|
ZLOGI(TAG, "pipette_aspirate_infer_eigen_time %d", ul); |
|
|
|
m_asynchronous_result.result0 = 0; |
|
|
|
@ -684,12 +684,14 @@ void PipetteModuleV2::zm_set_now_pos(int32_t x) { |
|
|
|
m_zm->set_enc_val(x); |
|
|
|
} |
|
|
|
void PipetteModuleV2::zm_move_to(int32_t x, int32_t v) { |
|
|
|
ZLOGI(TAG, "zm_move_to %d %d", x, v); |
|
|
|
if (m_cfg.zm_enable_enc != 0) { |
|
|
|
m_zm->setXACTUAL(m_zm->read_enc_val()); |
|
|
|
} |
|
|
|
m_zm->moveTo(x, v); |
|
|
|
} |
|
|
|
void PipetteModuleV2::zm_move_by(int32_t dx, int32_t v) { |
|
|
|
ZLOGI(TAG, "zm_move_by %d %d", dx, v); |
|
|
|
if (m_cfg.zm_enable_enc != 0) { |
|
|
|
m_zm->setXACTUAL(m_zm->read_enc_val()); |
|
|
|
} |
|
|
|
@ -787,14 +789,22 @@ int32_t PipetteModuleV2::pipette_get_sensor_sample_data_num(int32_t *num) { |
|
|
|
* @brief 参数检查 |
|
|
|
*/ |
|
|
|
int32_t PipetteModuleV2::bfcall(int32_t cmdid, uint8_t *param, int32_t len) { |
|
|
|
ZLOGI(TAG, "bfcall %s", cmdid2str(cmdid)); |
|
|
|
if (cmdid == kmodule_get_status) return 0; |
|
|
|
|
|
|
|
ZLOGI(TAG, "m%d bfcall %s ->", m_id, cmdid2str(cmdid)); |
|
|
|
|
|
|
|
if (cmdid == kpipette_zmotor_move_zero) goto check; |
|
|
|
if (cmdid == kpipette_zmotor_move_to_zero_point_quick) goto check; |
|
|
|
if (cmdid == kpipette_zmotor_move_to_zero_point_quick) { |
|
|
|
if (m_state.has_move_to_zero == 0) return err::kstep_motor_not_move_to_zero; |
|
|
|
goto check; |
|
|
|
} |
|
|
|
if (cmdid == kpipette_zmotor_measure_distance) goto check; |
|
|
|
if (cmdid == kpipette_zmotor_read_measure_distance_result) goto check; |
|
|
|
if (cmdid == kpipette_zmotor_move_by) goto check; |
|
|
|
if (cmdid == kpipette_zmotor_move_to) goto check; |
|
|
|
if (cmdid == kpipette_zmotor_move_to) { |
|
|
|
if (m_state.has_move_to_zero == 0) return err::kstep_motor_not_move_to_zero; |
|
|
|
goto check; |
|
|
|
} |
|
|
|
if (cmdid == kpipette_init_device) goto check; |
|
|
|
if (cmdid == kpipette_put_tip) goto check; |
|
|
|
if (cmdid == kpipette_lld_prepare) goto check; |
|
|
|
@ -831,11 +841,13 @@ check: |
|
|
|
|
|
|
|
return 0; |
|
|
|
} |
|
|
|
void PipetteModuleV2::aftercall(int32_t val) { |
|
|
|
if (val == 0) { |
|
|
|
ZLOGI(TAG, "call success"); |
|
|
|
void PipetteModuleV2::aftercall(int32_t cmdid, uint8_t *param, int32_t len, uint8_t *ack, int32_t acklen, int32_t ret) { |
|
|
|
if (cmdid == kmodule_get_status) return; |
|
|
|
|
|
|
|
if (ret == 0) { |
|
|
|
ZLOGI(TAG, "<- call success", m_id); |
|
|
|
} else { |
|
|
|
ZLOGI(TAG, "call fail,%s(%d)", err::error2str(val), val); |
|
|
|
ZLOGI(TAG, "<- call fail,%s(%d)", err::error2str(ret), ret); |
|
|
|
} |
|
|
|
} |
|
|
|
void PipetteModuleV2::runingcheck() { |
|
|
|
@ -860,17 +872,17 @@ void PipetteModuleV2::runingcheck() { |
|
|
|
|
|
|
|
// 检查电机状态
|
|
|
|
{ |
|
|
|
auto state = m_zm->getGState(); |
|
|
|
if (state.reset) { |
|
|
|
ZLOGE(TAG, "motor reset when run"); |
|
|
|
throw zapp_exception(err::kstep_motor_subic_reset); |
|
|
|
} else if (state.uv_cp) { |
|
|
|
ZLOGE(TAG, "motor uv_cp when run"); |
|
|
|
throw zapp_exception(err::kstep_motor_uv_cp); |
|
|
|
} else if (state.drv_err) { |
|
|
|
ZLOGE(TAG, "motor drv_err when run"); |
|
|
|
throw zapp_exception(err::kstep_motor_drv_err); |
|
|
|
} |
|
|
|
// auto state = m_zm->getGState();
|
|
|
|
// if (state.reset) {
|
|
|
|
// ZLOGE(TAG, "motor reset when run");
|
|
|
|
// throw zapp_exception(err::kstep_motor_subic_reset);
|
|
|
|
// } else if (state.uv_cp) {
|
|
|
|
// ZLOGE(TAG, "motor uv_cp when run");
|
|
|
|
// throw zapp_exception(err::kstep_motor_uv_cp);
|
|
|
|
// } else if (state.drv_err) {
|
|
|
|
// ZLOGE(TAG, "motor drv_err when run");
|
|
|
|
// throw zapp_exception(err::kstep_motor_drv_err);
|
|
|
|
// }
|
|
|
|
} |
|
|
|
} |
|
|
|
|
|
|
|
@ -881,12 +893,14 @@ void PipetteModuleV2::thread_delay(int32_t delayms) { // |
|
|
|
throw zapp_thread_stoped_exception(); |
|
|
|
} |
|
|
|
} |
|
|
|
void PipetteModuleV2::thread_start_work(function<void()> fn) { |
|
|
|
void PipetteModuleV2::thread_start_work(const char *fnname, function<void()> fn) { |
|
|
|
m_thread.stop(); |
|
|
|
creg.module_status = 1; |
|
|
|
creg.module_errorcode = 0; |
|
|
|
|
|
|
|
m_thread.start([this, fn]() { |
|
|
|
m_thread.start([this, fnname, fn]() { |
|
|
|
osDelay(1); |
|
|
|
ZLOGI(TAG, "start work -> %s", fnname); |
|
|
|
int32_t pump_before_pos_ul; |
|
|
|
int32_t pump_after_pos_ul; |
|
|
|
|
|
|
|
@ -908,12 +922,17 @@ void PipetteModuleV2::thread_start_work(function<void()> fn) { |
|
|
|
m_state.dul = pump_after_pos_ul - pump_before_pos_ul; |
|
|
|
m_state.dpos = endpos - startpos; |
|
|
|
} catch (const zapp_thread_stoped_exception &e) { // break by usr
|
|
|
|
ZLOGI(TAG, "break by usr"); |
|
|
|
m_zm->stop(); |
|
|
|
m_smtp2.pump_stop(); |
|
|
|
} catch (const zapp_exception &e) { |
|
|
|
ZLOGI(TAG, "catch exception %d", e.ecode()); |
|
|
|
m_zm->stop(); |
|
|
|
m_smtp2.pump_stop(); |
|
|
|
creg.module_errorcode = e.ecode(); |
|
|
|
} |
|
|
|
|
|
|
|
creg.module_status = 0; |
|
|
|
ZLOGI(TAG, "<- end work"); |
|
|
|
}); |
|
|
|
} |
