From 7b8f043c56f9ae977bbadf1e6740fe53d9fe3650 Mon Sep 17 00:00:00 2001
From: zwsd <zwsdtjl@zwsd.com>
Date: Wed, 3 Aug 2022 19:07:35 +0800
Subject: [PATCH] =?UTF-8?q?update(=E4=BD=BF=E7=94=A8if=20endif=E6=9D=A1?=
 =?UTF-8?q?=E4=BB=B6=E7=BC=96=E8=AF=91)?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

---
 main/main.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 57 insertions(+), 2 deletions(-)

diff --git a/main/main.c b/main/main.c
index 606c0f4..a2ac877 100644
--- a/main/main.c
+++ b/main/main.c
@@ -16,13 +16,40 @@
 #include "port.h"
 
 #define MAIN_LOG_TAG "MAIN"
+
+#define SUPPORT_KEY_INT 0
+#define SUPPORT_ELECTRIC_RELAY 0
+#define SUPPORT_DEBUG_LIGHT 1
+
 #define ble_uart_tx_size 128
 #define ble_uart_rx_size 128
+
+#if SUPPORT_DEBUG_LIGHT
+#define DEBUG_LIGHT 12
+#define GPIO_DEBUG_LIGHT_OUTPUT_PIN_SEL ((1ULL << DEBUG_LIGHT))
+
+#endif
+
+#if SUPPORT_KEY_INT
 #define KEY_INT1 27
 #define KEY_INT2 14
-#define DEBUG_LIGHT 12
 #define GPIO_KEY_INPUT_PIN_SEL ((1ULL << KEY_INT1) | (1ULL << KEY_INT2))
-#define GPIO_DEBUG_LIGHT_OUTPUT_PIN_SEL ((1ULL << DEBUG_LIGHT))
+
+#endif
+
+#if 0                   //预留
+#define TEMPER_LINE 18  //单总线温度传感器
+#define FAN 19          //风扇控制
+
+#endif
+
+#if SUPPORT_ELECTRIC_RELAY
+#define ELECTRIC_RELAY1 25
+#define ELECTRIC_RELAY2 26
+#define GPIO_ELECTRIC_RELAY_OUTPUT_PIN_SEL ((1ULL << ELECTRIC_RELAY1) | (1ULL << ELECTRIC_RELAY2))
+
+#endif
+
 static uint8_t bluetooth_tx_buffer[ble_uart_tx_size] = {0};
 static uint8_t bluetooth_rx_buffer[ble_uart_rx_size] = {0};
 
@@ -99,6 +126,7 @@ void motor_on_event(motor_event_t event) {
   }
 }
 
+#if SUPPORT_KEY_INT
 void gpio_input_key_init() {
   gpio_config_t gpio_grb_led_structer;
 
@@ -111,6 +139,24 @@ void gpio_input_key_init() {
   gpio_config(&gpio_grb_led_structer);
 }
 
+#endif
+
+#if SUPPORT_ELECTRIC_RELAY
+void gpio_electric_relay_init() {
+  gpio_config_t gpio_grb_led_structer;
+
+  gpio_grb_led_structer.intr_type = GPIO_INTR_DISABLE;
+  gpio_grb_led_structer.mode = GPIO_MODE_OUTPUT;
+  gpio_grb_led_structer.pin_bit_mask = GPIO_ELECTRIC_RELAY_OUTPUT_PIN_SEL;
+  gpio_grb_led_structer.pull_down_en = 0;
+  gpio_grb_led_structer.pull_up_en = 0;
+
+  gpio_config(&gpio_grb_led_structer);
+}
+
+#endif
+
+#if SUPPORT_DEBUG_LIGHT
 void gpio_output_debug_light_init() {
   gpio_config_t gpio_grb_led_structer;
 
@@ -131,6 +177,8 @@ void port_do_debug_light_state() {
   }
 }
 
+#endif
+
 void app_main(void) {
   bleuart_init(&ble_uart_init_struct);
   bleuart_reg_cb(blerxcb);
@@ -138,9 +186,16 @@ void app_main(void) {
   motor_init(&ble_uart_motor_structer);
   motor_reg_event_cb(motor_on_event);
 
+#if SUPPORT_DEBUG_LIGHT
   gpio_output_debug_light_init();
+
+#endif
+  
   while (true) {
+#if SUPPORT_DEBUG_LIGHT
     port_do_debug_light_state();
+#endif
+
     bleuart_schedule();
     motor_module_schedule();
   }