zhaohe
3 years ago
23 changed files with 862 additions and 1517 deletions
-
21APP/board.h
-
0APP/irqhandler.c
-
0APP/irqhandler.h
-
31APP/light.h
-
30APP/main.c
-
47APP/main.h
-
26APP/ozone_pwm_control.h
-
1APP/port.c
-
167APP/pwm.c
-
19APP/pwm.h
-
3APP/service/light_control_service.c
-
0APP/service/light_control_service.h
-
0APP/service/ozone_control_service.c
-
0APP/service/ozone_control_service.h
-
218MDK_StartUp/startup_ES8P5066.s
-
1068project_ozone/Listings/project_o.map
-
46project_ozone/project_o.uvgui.zel
-
100project_ozone/project_o.uvopt
-
42project_ozone/project_o.uvproj
@ -1,31 +0,0 @@ |
|||||
#ifndef _LIGHT_H_ |
|
||||
#define _LIGHT_H_ |
|
||||
|
|
||||
// #include "board.h" |
|
||||
// #include "lib_config.h" |
|
||||
// #include "port.h" |
|
||||
// #include "system_ES8P5066.h" |
|
||||
// #include "systick.h" |
|
||||
|
|
||||
// typedef enum { |
|
||||
// krgb_close = 0, /*关闭灯*/ |
|
||||
// krgb_color_green = 1, /*打开绿灯*/ |
|
||||
// krgb_color_blue = 2, /*打开蓝灯*/ |
|
||||
// krgb_color_red = 3, /*打开红灯*/ |
|
||||
|
|
||||
// } rgb_light_mode_t; |
|
||||
|
|
||||
// void light_module_set_rgb_mode(rgb_light_mode_t mode); |
|
||||
// void light_module_set_error_light_mode(bool open, uint8_t error_mode); |
|
||||
// void light_module_set_autoshutdown_indicator_light(bool light); |
|
||||
// void light_module_set_rgb_in_interval_working_mode(bool state); |
|
||||
// void light_module_close_all_light(void); |
|
||||
|
|
||||
// void light_module_schedule(void); |
|
||||
|
|
||||
// //外部实现 |
|
||||
// int hook_get_autoshutdown_timecount(); |
|
||||
// //臭氧发生器是否工作 |
|
||||
// bool hook_get_ozone_generator_working_flag(); |
|
||||
|
|
||||
#endif |
|
||||
@ -1,47 +0,0 @@ |
|||||
#ifndef __MAIN_H__ |
|
||||
#define __MAIN_H__ |
|
||||
#if 0 |
|
||||
#include "irqhandler.h" |
|
||||
#include "lib_config.h" |
|
||||
#include "light.h" |
|
||||
#include "ozone_pwm_control.h" |
|
||||
#include "port.h" |
|
||||
#include "pwm.h" |
|
||||
#include "system_ES8P5066.h" |
|
||||
#include "systick.h" |
|
||||
#include "uart0.h" |
|
||||
typedef enum { |
|
||||
kwork_level_close = 0, /*关闭PWM输出，关闭RGB*/ |
|
||||
kwork_level_low = 1, /*低档*/ |
|
||||
kwork_level_hight = 2, /*高档*/ |
|
||||
} work_level_t; |
|
||||
|
|
||||
typedef struct { |
|
||||
bool fan_error_status; /*风扇电压异常*/ |
|
||||
bool way_circuit_error_status; /*总电压异常*/ |
|
||||
} error_state_t; |
|
||||
|
|
||||
// void Uart0Init(void); |
|
||||
// void Uart0SendBuff(uint8_t *buff); |
|
||||
// void port_do_debug_light_state(void); |
|
||||
// void LedInit(void); |
|
||||
|
|
||||
void process_intervalkey_press_even(void); |
|
||||
void update_interval_period_duty(uint8_t interval_duty); |
|
||||
void restore_the_mode_before_intermittent_work(void); |
|
||||
void process_rgb_flicker(void); |
|
||||
void power_on_ozone_working_status(void); |
|
||||
void update_ozone_work_level(work_level_t level); |
|
||||
void process_levelkey_press_even(void); |
|
||||
void shutdown(void); |
|
||||
void starting_up(void); |
|
||||
void process_powerkey(void); |
|
||||
void updae_timing_light_state(void); |
|
||||
void update_timing_time(void); |
|
||||
void try_shutdown(void); |
|
||||
bool timing_function_is_enable(void); |
|
||||
void iwdt_init(void); |
|
||||
void feed_iwdt(void); |
|
||||
void process_error_even(void); |
|
||||
#endif |
|
||||
#endif |
|
||||
@ -1,26 +0,0 @@ |
|||||
#if 0 |
|
||||
#ifndef _OZONE_PWM_CONTROL_H_ |
|
||||
#define _OZONE_PWM_CONTROL_H_ |
|
||||
|
|
||||
#include <stdbool.h> |
|
||||
#include <stdint.h> |
|
||||
|
|
||||
#include "lib_config.h" |
|
||||
#include "light.h" |
|
||||
#include "port.h" |
|
||||
#include "system_ES8P5066.h" |
|
||||
|
|
||||
void ozone_pwm_control_module_set_pwm_output_1(uint32_t hardware_period, uint8_t hardware_duty); |
|
||||
void ozone_pwm_control_module_set_pwm_output_2(uint32_t hardware_period, uint8_t hardware_duty, uint32_t large_period, uint8_t large_duty); |
|
||||
|
|
||||
void ozone_pwm_control_module_stop_pwm(void); |
|
||||
void ozone_pwm_control_module_loop(void); |
|
||||
|
|
||||
void ozone_pwm_control_enable(void); |
|
||||
void ozone_pwm_control_disable(void); |
|
||||
bool ozone_pwm_control_is_enable(void); |
|
||||
|
|
||||
bool ozone_pwm_control_hardware_is_enable(void); |
|
||||
|
|
||||
#endif |
|
||||
#endif |
|
||||
@ -1,167 +0,0 @@ |
|||||
#if 1 |
|
||||
#include "pwm.h" |
|
||||
|
|
||||
#include "board.h" |
|
||||
#define CLCK 48.0 |
|
||||
#define PRE_CLK 1.0 |
|
||||
uint32_t target_frequencyhz; |
|
||||
uint32_t target_duty; |
|
||||
|
|
||||
static uint32_t s_mat2; |
|
||||
static uint32_t s_top; |
|
||||
|
|
||||
static double calculate_top(double target_frequency_hz) { |
|
||||
int clck = 0; |
|
||||
int top = 0; |
|
||||
clck = CLCK * 1000 * 1000 / PRE_CLK; |
|
||||
top = clck / target_frequency_hz; |
|
||||
return top; |
|
||||
} |
|
||||
|
|
||||
void t16_pa4_init(void) { |
|
||||
T16Nx_Disable(T16N0); |
|
||||
// PA4 T16N0_1 |
|
||||
T16Nx_BaseInitStruType x; |
|
||||
T16Nx_PWMInitStruType y; |
|
||||
/* 初始化T16Nx定时器*/ |
|
||||
x.T16Nx_ClkS = T16Nx_ClkS_PCLK; //时钟源48M |
|
||||
x.T16Nx_SYNC = Disable; //不同步 |
|
||||
x.T16Nx_EDGE = T16Nx_EDGE_Rise; //上升沿触发 |
|
||||
x.T16Nx_Mode = T16Nx_Mode_PWM; // 选用PWM模式 |
|
||||
x.T16Nx_PREMAT = PRE_CLK; /* 预分频比1:1 */ |
|
||||
T16Nx_BaseInit(T16N0, &x); |
|
||||
/* 配置T16N0通道1输出 */ |
|
||||
y.T16Nx_MOE0 = Disable; |
|
||||
y.T16Nx_MOE1 = Enable; |
|
||||
y.T16Nx_POL0 = POSITIVE; //在串口发送的时候，正极性代表发送的数据与接受的数据相同，负极性代表与发送的数据相反，在这么不知道有没有作用 |
|
||||
y.T16Nx_POL1 = POSITIVE; |
|
||||
y.T16Nx_PWMMODE = T16Nx_PWMMode_INDEP; //选择独立模式 |
|
||||
y.PWMDZE = Disable; // PWM互补模式死区使能 |
|
||||
y.REGBUFEN = Enable; //缓冲寄存器使能 (REGBUFEN目前不知道干什么用的) |
|
||||
T16Nx_PMWOutInit(T16N0, &y); |
|
||||
/* 配置T16N0 通道1输出 */ |
|
||||
/*MAT2 MAT3 通道的中断配置*/ |
|
||||
//匹配寄存器值匹配后的工作模式，计数到以后： 继续计数不产生中断 |
|
||||
T16Nx_MAT2ITConfig(T16N0, T16Nx_Go_No); |
|
||||
//匹配寄存器值匹配后的工作模式,清零并重新计数，产生中断 |
|
||||
T16Nx_MAT3ITConfig(T16N0, T16Nx_Clr_Int); |
|
||||
|
|
||||
/*MAT2 MAT3 匹配后的输出电平高低*/ |
|
||||
T16Nx_MAT2Out1Config(T16N0, |
|
||||
T16Nx_Out_Low); //匹配后输出端口的模式，输出高还是低 |
|
||||
T16Nx_MAT3Out1Config(T16N0, |
|
||||
T16Nx_Out_High); //匹配后输出端口的模式，输出高还是低 |
|
||||
//以上是设置模式，输出高低电平 |
|
||||
T16Nx_SetCNT1(T16N0, 0); //设定计数器的初始值 |
|
||||
T16Nx_SetMAT2(T16N0, 0); //设置匹配寄存器的数值 |
|
||||
T16Nx_SetMAT3(T16N0, 0); //设置匹配寄存器的数值 |
|
||||
//设置计数器峰值//根据这个得到定时的时钟48M/48000=1khZ(在独立模式下PWM的周期由TOP1决定为TOP+1，周期算出来是1ms) |
|
||||
T16Nx_SetTOP1(T16N0, 0); |
|
||||
//以上是设置占空比 |
|
||||
/* 配置输出管脚 */ |
|
||||
GPIO_InitSettingType initset; |
|
||||
|
|
||||
initset.Signal = GPIO_Pin_Signal_Digital; //数字 |
|
||||
initset.Dir = GPIO_Direction_Output; //输出模式 |
|
||||
initset.Func = GPIO_Reuse_Func2; //复用到T16N0_1功能 |
|
||||
initset.ODE = GPIO_ODE_Output_Disable; //开漏使能 |
|
||||
initset.DS = GPIO_DS_Output_Normal; //普通电流模式 |
|
||||
initset.PUE = GPIO_PUE_Input_Enable; //弱上拉使能 |
|
||||
initset.PDE = GPIO_PDE_Input_Disable; //弱下拉禁止 |
|
||||
/* 配置PA4为T16N0输出通道1 */ |
|
||||
GPIO_Init(GPIO_Pin_A4, &initset); |
|
||||
T16Nx_Enable(T16N0); |
|
||||
return; |
|
||||
} |
|
||||
|
|
||||
void set_pwm_t16_pa4_2(uint16_t mat2, uint16_t top) { |
|
||||
uint16_t Mat2 = mat2; |
|
||||
uint16_t Mat3 = top; |
|
||||
|
|
||||
s_mat2 = mat2; |
|
||||
s_top = top; |
|
||||
|
|
||||
// printf("set_pwm_t16_pa4 mat2:%d mat3:%d top:%d\n", mat2, Mat3, top); |
|
||||
T16Nx_SetCNT1(T16N0, 0); //设定计数器的初始值 |
|
||||
T16Nx_SetMAT2(T16N0, Mat2); //设置匹配寄存器的数值 |
|
||||
T16Nx_SetMAT3(T16N0, Mat3); //设置匹配寄存器的数值 |
|
||||
//设置计数器峰值//根据这个得到定时的时钟48M/48000=1khZ(在独立模式下PWM的周期由TOP1决定为TOP+1，周期算出来是1ms) |
|
||||
T16Nx_SetTOP1(T16N0, top); |
|
||||
//以上是设置占空比 |
|
||||
} |
|
||||
|
|
||||
uint32_t getCNT() { return T16Nx_GetCNT1(T16N0); } |
|
||||
uint32_t getTOP() { return T16Nx_GetTOP1(T16N0); } |
|
||||
|
|
||||
void set_pwm_mat2(uint16_t mat2) { set_pwm_t16_pa4_2(mat2, s_top); } |
|
||||
|
|
||||
void set_pwm_t16_pa4(uint32_t freqhz, double duty) { |
|
||||
// printf("set_pwm_t16_pa4 %d %f\n", freqhz, duty); |
|
||||
double top_double = calculate_top(freqhz); //根据需要的频率计算出TOP（自动重装载值） |
|
||||
uint16_t top = (uint16_t)top_double; |
|
||||
uint16_t Mat2 = (uint16_t)top_double * (duty / 100.0); |
|
||||
if (Mat2 >= top) Mat2 = top - 1; |
|
||||
set_pwm_t16_pa4_2(Mat2, top); |
|
||||
} |
|
||||
|
|
||||
//###################################################### |
|
||||
/** |
|
||||
* @brief 设置pwm的周期占空比 |
|
||||
* |
|
||||
* @param frequency |
|
||||
* @param duty |
|
||||
*/ |
|
||||
|
|
||||
/** |
|
||||
* |
|
||||
* 频率变化: |
|
||||
* |
|
||||
* |
|
||||
* |
|
||||
* 占空比变化: |
|
||||
* 20->0 |
|
||||
* 0->20 |
|
||||
* 0->10 |
|
||||
* |
|
||||
* 有效时间逐渐增加，周期最大,有效时间不变，周期变小，频率变大 |
|
||||
* |
|
||||
* |
|
||||
* |
|
||||
* 周期变大，有效时间不变，周期变到最大，有效时间逐渐减小 |
|
||||
* |
|
||||
* |
|
||||
* 1. 先变化到周期,如果周期时间大于占空比，则先变化到占空比 |
|
||||
* 2. 再变化频率 |
|
||||
* |
|
||||
*/ |
|
||||
|
|
||||
uint32_t s_target_frequencyhz; |
|
||||
uint32_t s_now_frequencyhz; |
|
||||
|
|
||||
uint32_t s_target_duty; |
|
||||
uint32_t s_now_duty; |
|
||||
|
|
||||
void set_pwm_modbul_freq_duty(uint32_t frequencyhz, uint32_t duty) { |
|
||||
// s_target_frequencyhz = frequencyhz; |
|
||||
|
|
||||
// if (s_target_frequencyhz <= MIN_PWM_FREQ) { |
|
||||
// s_target_frequencyhz = MIN_PWM_FREQ; |
|
||||
// } |
|
||||
// s_target_duty = duty; |
|
||||
if (frequencyhz < 50) frequencyhz = 50; |
|
||||
set_pwm_t16_pa4(frequencyhz, duty); |
|
||||
} |
|
||||
|
|
||||
void set_pwm_modbul_freq_duty2(uint32_t frequencyhz, double duty) { |
|
||||
// s_target_frequencyhz = frequencyhz; |
|
||||
|
|
||||
// if (s_target_frequencyhz <= MIN_PWM_FREQ) { |
|
||||
// s_target_frequencyhz = MIN_PWM_FREQ; |
|
||||
// } |
|
||||
// s_target_duty = duty; |
|
||||
if (frequencyhz < 50) frequencyhz = 50; |
|
||||
set_pwm_t16_pa4(frequencyhz, duty); |
|
||||
} |
|
||||
|
|
||||
void stop_pwm_output() { T16Nx_Disable(T16N0); } |
|
||||
#endif |
|
||||
@ -1,19 +0,0 @@ |
|||||
#ifndef _PWM_MODULE_H_ |
|
||||
#define _PWM_MODULE_H_ |
|
||||
|
|
||||
#include "lib_config.h" |
|
||||
#include "light.h" |
|
||||
#include "port.h" |
|
||||
#include "system_ES8P5066.h" |
|
||||
|
|
||||
void set_pwm_modbul_freq_duty(uint32_t frequencyhz, uint32_t duty); |
|
||||
void set_pwm_mat2(uint16_t mat2); |
|
||||
void set_pwm_modbul_freq_duty2(uint32_t frequencyhz, double duty); |
|
||||
|
|
||||
void stop_pwm_output(); |
|
||||
|
|
||||
void t16_pa4_init(void); |
|
||||
|
|
||||
|
|
||||
|
|
||||
#endif |
|
||||
@ -1,5 +1,6 @@ |
|||||
#include "light.h" |
|
||||
|
|
||||
#if 0 |
#if 0 |
||||
|
#include "light.h" |
||||
static bool s_interval_working_mode; |
static bool s_interval_working_mode; |
||||
static rgb_light_mode_t s_rgb_now_state; |
static rgb_light_mode_t s_rgb_now_state; |
||||
static rgb_light_mode_t s_rgb_light_mode_config; |
static rgb_light_mode_t s_rgb_light_mode_config; |
||||
@ -1,218 +0,0 @@ |
|||||
;******************************************************************************* |
|
||||
|
|
||||
; *author : Eastsoft MCU Software Team |
|
||||
; *version : V0.01 |
|
||||
; *data : 5/28/2021 |
|
||||
; |
|
||||
; *Copyright (C) 2021 Shanghai Eastsoft Microelectronics Co., Ltd. |
|
||||
; * |
|
||||
; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED |
|
||||
; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF |
|
||||
; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. |
|
||||
; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR |
|
||||
; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. |
|
||||
;******************************************************************************* |
|
||||
|
|
||||
|
|
||||
; <h> Stack Configuration |
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> |
|
||||
; </h> |
|
||||
|
|
||||
Stack_Size EQU 0x00000400 |
|
||||
|
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3 |
|
||||
Stack_Mem SPACE Stack_Size |
|
||||
__initial_sp |
|
||||
|
|
||||
|
|
||||
; <h> Heap Configuration |
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> |
|
||||
; </h> |
|
||||
|
|
||||
Heap_Size EQU 0x00000000 |
|
||||
|
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3 |
|
||||
__heap_base |
|
||||
Heap_Mem SPACE Heap_Size |
|
||||
__heap_limit |
|
||||
|
|
||||
PRESERVE8 |
|
||||
THUMB |
|
||||
|
|
||||
; Vector Table Mapped to Address 0 at Reset |
|
||||
|
|
||||
AREA RESET, DATA, READONLY |
|
||||
EXPORT __Vectors |
|
||||
|
|
||||
__Vectors DCD __initial_sp ;0, Top of Stack |
|
||||
DCD Reset_IRQHandler ;1, Reset Handler |
|
||||
DCD NMI_IRQHandler ;2, NMI Handler |
|
||||
DCD HardFault_IRQHandler ;3, HardFault Handler |
|
||||
DCD 0 ;4, Reserved |
|
||||
DCD 0 ;5, Reserved |
|
||||
DCD 0 ;6, Reserved |
|
||||
DCD 0 ;7, Reserved |
|
||||
DCD 0 ;8, Reserved |
|
||||
DCD 0 ;9, Reserved |
|
||||
DCD 0 ;10, Reserved |
|
||||
DCD SVC_IRQHandler ;11, SVCall Handler |
|
||||
DCD 0 ;12, Reserved |
|
||||
DCD 0 ;13, Reserved |
|
||||
DCD PendSV_IRQHandler ;14, PendSV Handler |
|
||||
DCD SysTick_IRQHandler ;15, SysTick Handler |
|
||||
|
|
||||
; External Interrupts |
|
||||
DCD PINT0_IRQHandler ;16, PINT0 IRQHandler |
|
||||
DCD PINT1_IRQHandler ;17, PINT1 IRQHandler |
|
||||
DCD PINT2_IRQHandler ;18, PINT2 IRQHandler |
|
||||
DCD PINT3_IRQHandler ;19, PINT3 IRQHandler |
|
||||
DCD PINT4_IRQHandler ;20, PINT4 IRQHandler |
|
||||
DCD PINT5_IRQHandler ;21, PINT5 IRQHandler |
|
||||
DCD PINT6_IRQHandler ;22, PINT6 IRQHandler |
|
||||
DCD PINT7_IRQHandler ;23, PINT7 IRQHandler |
|
||||
DCD T16N0_IRQHandler ;24, T16N0 IRQHandler |
|
||||
DCD T16N1_IRQHandler ;25, T16N1 IRQHandler |
|
||||
DCD T16N2_IRQHandler ;26, T16N2 IRQHandler |
|
||||
DCD T16N3_IRQHandler ;27, T16N3 IRQHandler |
|
||||
DCD T32N0_IRQHandler ;28, T32N0 IRQHandler |
|
||||
DCD 0 ;29, Reserved |
|
||||
DCD 0 ;30, Reserved |
|
||||
DCD WWDT_IRQHandler ;31, WWDT IRQHandler |
|
||||
DCD IWDT_IRQHandler ;32, IWDT IRQHandler |
|
||||
DCD 0 ;33, Reserved |
|
||||
DCD KINT_IRQHandler ;34, KINT IRQHandler |
|
||||
DCD ADC_IRQHandler ;35, ADC IRQHandler |
|
||||
DCD 0 ;36, Reserved |
|
||||
DCD LVD_IRQHandler ;37, LVD IRQHandler |
|
||||
DCD 0 ;38, Reserved |
|
||||
DCD UART0_IRQHandler ;39, UART0 IRQHandler |
|
||||
DCD UART1_IRQHandler ;40, UART1 IRQHandler |
|
||||
DCD UART2_IRQHandler ;41, UART2 IRQHandler |
|
||||
DCD 0 ;42, Reserved |
|
||||
DCD 0 ;43, Reserved |
|
||||
DCD SPI1_IRQHandler ;44, SPI1 IRQHandler |
|
||||
DCD I2C0_IRQHandler ;45, I2C0 IRQHandler |
|
||||
DCD 0 ;46, Reserved |
|
||||
DCD CCM_IRQHandler ;47, CCM IRQHandler |
|
||||
|
|
||||
AREA |.text|, CODE, READONLY |
|
||||
|
|
||||
; Reset Handler |
|
||||
|
|
||||
Reset_IRQHandler PROC |
|
||||
EXPORT Reset_IRQHandler [WEAK] |
|
||||
IMPORT __main |
|
||||
IMPORT SystemInit |
|
||||
LDR R0, =SystemInit |
|
||||
BLX R0 |
|
||||
LDR R0, =__main |
|
||||
BX R0 |
|
||||
ENDP |
|
||||
|
|
||||
; Dummy Exception IRQHandlers (infinite loops which can be modified) |
|
||||
|
|
||||
NMI_IRQHandler PROC |
|
||||
EXPORT NMI_IRQHandler [WEAK] |
|
||||
B . |
|
||||
ENDP |
|
||||
HardFault_IRQHandler PROC |
|
||||
EXPORT HardFault_IRQHandler [WEAK] |
|
||||
B . |
|
||||
ENDP |
|
||||
SVC_IRQHandler PROC |
|
||||
EXPORT SVC_IRQHandler [WEAK] |
|
||||
B . |
|
||||
ENDP |
|
||||
PendSV_IRQHandler PROC |
|
||||
EXPORT PendSV_IRQHandler [WEAK] |
|
||||
B . |
|
||||
ENDP |
|
||||
SysTick_IRQHandler PROC |
|
||||
EXPORT SysTick_IRQHandler [WEAK] |
|
||||
B . |
|
||||
ENDP |
|
||||
|
|
||||
Default_IRQHandler PROC |
|
||||
EXPORT PINT0_IRQHandler [WEAK] |
|
||||
EXPORT PINT1_IRQHandler [WEAK] |
|
||||
EXPORT PINT2_IRQHandler [WEAK] |
|
||||
EXPORT PINT3_IRQHandler [WEAK] |
|
||||
EXPORT PINT4_IRQHandler [WEAK] |
|
||||
EXPORT PINT5_IRQHandler [WEAK] |
|
||||
EXPORT PINT6_IRQHandler [WEAK] |
|
||||
EXPORT PINT7_IRQHandler [WEAK] |
|
||||
EXPORT T16N0_IRQHandler [WEAK] |
|
||||
EXPORT T16N1_IRQHandler [WEAK] |
|
||||
EXPORT T16N2_IRQHandler [WEAK] |
|
||||
EXPORT T16N3_IRQHandler [WEAK] |
|
||||
EXPORT T32N0_IRQHandler [WEAK] |
|
||||
EXPORT WWDT_IRQHandler [WEAK] |
|
||||
EXPORT IWDT_IRQHandler [WEAK] |
|
||||
EXPORT RTC_IRQHandler [WEAK] |
|
||||
EXPORT KINT_IRQHandler [WEAK] |
|
||||
EXPORT ADC_IRQHandler [WEAK] |
|
||||
EXPORT LVD_IRQHandler [WEAK] |
|
||||
EXPORT UART0_IRQHandler [WEAK] |
|
||||
EXPORT UART1_IRQHandler [WEAK] |
|
||||
EXPORT UART2_IRQHandler [WEAK] |
|
||||
EXPORT SPI1_IRQHandler [WEAK] |
|
||||
EXPORT I2C0_IRQHandler [WEAK] |
|
||||
EXPORT CCM_IRQHandler [WEAK] |
|
||||
|
|
||||
PINT0_IRQHandler |
|
||||
PINT1_IRQHandler |
|
||||
PINT2_IRQHandler |
|
||||
PINT3_IRQHandler |
|
||||
PINT4_IRQHandler |
|
||||
PINT5_IRQHandler |
|
||||
PINT6_IRQHandler |
|
||||
PINT7_IRQHandler |
|
||||
T16N0_IRQHandler |
|
||||
T16N1_IRQHandler |
|
||||
T16N2_IRQHandler |
|
||||
T16N3_IRQHandler |
|
||||
T32N0_IRQHandler |
|
||||
WWDT_IRQHandler |
|
||||
IWDT_IRQHandler |
|
||||
RTC_IRQHandler |
|
||||
KINT_IRQHandler |
|
||||
ADC_IRQHandler |
|
||||
LVD_IRQHandler |
|
||||
UART0_IRQHandler |
|
||||
UART1_IRQHandler |
|
||||
UART2_IRQHandler |
|
||||
SPI1_IRQHandler |
|
||||
I2C0_IRQHandler |
|
||||
CCM_IRQHandler |
|
||||
|
|
||||
B . |
|
||||
|
|
||||
ENDP |
|
||||
|
|
||||
ALIGN |
|
||||
|
|
||||
; User Initial Stack & Heap |
|
||||
|
|
||||
IF :DEF:__MICROLIB |
|
||||
|
|
||||
EXPORT __initial_sp |
|
||||
EXPORT __heap_base |
|
||||
EXPORT __heap_limit |
|
||||
|
|
||||
ELSE |
|
||||
|
|
||||
IMPORT __use_two_region_memory |
|
||||
EXPORT __user_initial_stackheap |
|
||||
__user_initial_stackheap |
|
||||
|
|
||||
LDR R0, = Heap_Mem |
|
||||
LDR R1, =(Stack_Mem + Stack_Size) |
|
||||
LDR R2, = (Heap_Mem + Heap_Size) |
|
||||
LDR R3, = Stack_Mem |
|
||||
BX LR |
|
||||
|
|
||||
ALIGN |
|
||||
|
|
||||
ENDIF |
|
||||
|
|
||||
END |
|
||||
1068
project_ozone/Listings/project_o.map
File diff suppressed because it is too large
View File
File diff suppressed because it is too large
View File
46
project_ozone/project_o.uvgui.zel
File diff suppressed because it is too large
View File
File diff suppressed because it is too large
View File
Write
Preview
Loading…
Cancel
Save
Reference in new issue