#pragma once
#include <stdbool.h>
#include <stdint.h>
typedef enum {
  klevel1 = 0,
  klevel2,
} level_t;

typedef enum {
  knormal,
  ktimingMode,
  kintermittentMode,
} mode_t;

typedef enum {
  knone_active,
  kchange_level_input,
  kchange_countdonw_time_input,
  kchange_intermittentmode_time_input,
} active_input_t;

typedef enum {
  knoneException,
  kOzonePrimaryCircuitAnomaly,    //臭氧一级回路异常,MOS断路,或者变压器断路,如果MOS短路，设备会直接无法启动
  kOzoneSecondaryCircuitAnomaly,  //臭氧二级回路异常,臭氧发生棒无法击穿产生臭氧，可能是焊接问题，或者接触不良
  kfanIsBroken,                   //风扇故障
  kPowerOutOfControl,             //功率控制失控
} error_t;

typedef struct {
  bool poweron;
  mode_t mode;
  level_t level;

  active_input_t active_input;   //由human_computer_interaction_service维护
  uint32_t active_start_ticket;  //由human_computer_interaction_service维护

  int countdonwnum;
  int countdonwnum_s;

  int countdonw_setting_num;
  uint32_t countdonw_start_ticket;

  // bool intermittentMode_idle;
  bool working;

  error_t error;
} ThisDevice_t;

#define kconst_flash_auto_close_time (1500)                //按键输入状态有效时间
#define kconst_countdown_step_s (15*60)                       //倒计时每按一次按键，倒计时增加时间
#define kconst_active_input_light_flick_interval_ms (150)  //按键输入状态闪烁间隔时间
// #define INTERMITTENTMODE_PERIOD_S 55                       //间歇工作模式的时间间隔,至少大于四倍的kconst_countdown_step_s
#define KEY_PERIOD 20                //
#define EXCEPTION_CHECK_PERIOD 50    //
#define kconst_pwm_work_dutyns 5000  //臭氧模块工作时候高电平时间

#define EXPECT_POWER_WINDONWS ((float)(0.3))  //允许设备工作在 [level1_expect_power-windows,level1_expect_power+windows]之间
#define LEVEL1_EXPECT_POWER ((float)(3.0))    //
#define LEVEL2_EXPECT_POWER ((float)(5.0))    //
#define MAX_FREQ ((float)(38000))             //设备可提供调整频率的最大频率

//卡尔曼滤波器参数
#define KALMAN_FILTER_PARA \
  { 0.02, 0, 0, 0, 0.05, 0.543 }

extern ThisDevice_t thisDevice;