#include <stdbool.h>  //定义布尔
#include <string.h>

#include "board.h"
//
#include "zes8p5066lib/basic.h"
#include "zes8p5066lib/gpio.h"
#include "zes8p5066lib/key.h"
#include "zes8p5066lib/systicket.h"
#include "zes8p5066lib/uart0.h"
//
#include "service/device_state.h"
#include "service/light_control_service.h"
#include "test.h"
#include "zsimple_timer/zsimple_timer.h"

/***********************************************************************************************************************
 * =====================================================函数声明====================================================== *
 ***********************************************************************************************************************/
void onkey(zkey_t* key, zkey_state_t key_state);
/***********************************************************************************************************************
 * =====================================================全局变量====================================================== *
 ***********************************************************************************************************************/
static zkey_t s_keys[] = {
    ZKEY_INIT("powerkey", port_gpio_get_power_key_state),        //电源按键
    ZKEY_INIT("levelkey", port_gpio_get_level_key_state),        //左1
    ZKEY_INIT("timerkey", port_gpio_get_timer_key_state),        //左2
    ZKEY_INIT("intervalkey", port_gpio_get_interval_key_state),  //左3
};
zkey_module_t key_module = ZMODULE_INIT(s_keys, onkey);
static zsimple_timer_t zsimple_timer_mem[20];  //最多同时存在20个定时器
zsimple_timer_t* debuglighttimer;

/***********************************************************************************************************************
 * =======================================================方法======================================================== *
 ***********************************************************************************************************************/

static uint32_t compute_countdown_num(int countdowns) {
  if (countdowns) return countdowns / kconst_countdown_step_s + !!(countdowns % kconst_countdown_step_s);
}

static void shutdwon() {
  printf("power off\n");
  thisDevice.poweron = false;
  port_fan_set(false);
  //@TODO:关闭臭氧
}

static void increase_and_assign_countdonwnum() {
  if (thisDevice.countdonwnum == 4) {
    thisDevice.countdonwnum = 0;
    thisDevice.countdonwnum_s = 0;
    thisDevice.countdonw_s_setting_num = 0;
    lcs_active_input(knone_active);
  } else {
    thisDevice.countdonwnum_s = (thisDevice.countdonwnum + 1) * kconst_countdown_step_s;
    thisDevice.countdonwnum = thisDevice.countdonwnum + 1;
    thisDevice.countdonw_s_setting_num = thisDevice.countdonwnum_s;
    thisDevice.countdonw_start_ticket = systicket_get_now_ms();
  }
}

static void onkey(zkey_t* key, zkey_state_t key_state) {
  if /*  */ (strcmp(key->name, "powerkey") == 0 && zks_rising_edge == key_state) {
    printf("on %s \n", key->name);
    if (!thisDevice.poweron) {
      printf("power on\n");
      thisDevice.poweron = true;
      thisDevice.level = klevel1;
      thisDevice.mode = knormal;

      //设置灯光效果
      port_fan_set(true);
      //@TODO:启动臭氧
    } else {
      shutdwon();
    }
    return;
  }
  // levelkey
  if (strcmp(key->name, "levelkey") == 0 && zks_rising_edge == key_state) {
    printf("on %s \n", key->name);
    /**
     * @brief 当前在不在修改状态，不在，则进入修改状态
     */
    if (!lcs_input_is_active(kchange_level_input)) {
      lcs_active_input(kchange_level_input);
      return;
    }

    if (thisDevice.level == klevel1) {
      printf("changet level to level2\n");
      thisDevice.level = klevel2;
      //更改臭氧状态
    } else if (thisDevice.level == klevel2) {
      printf("changet level to level1\n");
      thisDevice.level = klevel1;
      //更改臭氧状态
    }
    lcs_active_input(kchange_level_input);
    return;
  }
  // timerkey
  if (strcmp(key->name, "timerkey") == 0 && zks_rising_edge == key_state) {
    printf("on %s \n", key->name);
    if (!lcs_input_is_active(kchange_countdonw_time_input)) {
      lcs_active_input(kchange_countdonw_time_input);

      if (thisDevice.mode != ktimingMode || thisDevice.countdonwnum_s == 0) {
        thisDevice.countdonwnum_s = kconst_countdown_step_s;
        thisDevice.countdonwnum = 1;
        thisDevice.countdonw_s_setting_num = thisDevice.countdonwnum_s;
        thisDevice.countdonw_start_ticket = systicket_get_now_ms();
      }
      return;
    }

    lcs_active_input(kchange_countdonw_time_input);
    increase_and_assign_countdonwnum();
  }
  if (strcmp(key->name, "intervalkey") == 0 && zks_rising_edge == key_state) {
    printf("on %s \n", key->name);

    if (!lcs_input_is_active(kchange_intermittentmode_time_input)) {
      lcs_active_input(kchange_intermittentmode_time_input);

      if (thisDevice.mode != kintermittentMode || thisDevice.countdonwnum_s == 0) {
        thisDevice.countdonwnum_s = kconst_countdown_step_s;
        thisDevice.countdonwnum = 1;
        thisDevice.countdonw_s_setting_num = thisDevice.countdonwnum_s;
        thisDevice.countdonw_start_ticket = systicket_get_now_ms();
      }
      return;
    }

    lcs_active_input(kchange_intermittentmode_time_input);
    increase_and_assign_countdonwnum();
  }
}

void process_countdwonevent() {
  //计算countdown
  if /*  */ (thisDevice.mode == knormal) {
    thisDevice.countdonwnum = 0;
    thisDevice.countdonwnum_s = 0;
  } else if (thisDevice.mode == ktimingMode || thisDevice.mode == kintermittentMode) {
    if (thisDevice.countdonwnum_s != 0) {
      thisDevice.countdonwnum_s =  //
          thisDevice.countdonw_s_setting_num - systicket_haspassedms(thisDevice.countdonw_start_ticket) / 1000;
      thisDevice.countdonwnum = compute_countdown_num(thisDevice.countdonwnum_s);
    }
  }

  /**
   * @brief 处理倒计时事件发生时的事件
   */
  if (thisDevice.mode == ktimingMode) {
    //定时自动关机
    if (thisDevice.poweron) {
      if (thisDevice.countdonwnum_s == 0) {
        shutdwon();
      }
    }
  } else if (thisDevice.mode == kintermittentMode) {
    if (!thisDevice.intermittentMode_idle) {
      if (thisDevice.countdonwnum_s == 0) {
        //切换状态到待机状态
        // TODO:关闭臭氧
        thisDevice.intermittentMode_idle = true;
      }
    } else {
      if (systicket_haspassedms(thisDevice.countdonw_start_ticket) / 1000 > INTERMITTENTMODE_PERIOD_S) {
        thisDevice.intermittentMode_idle = false;
        //
        thisDevice.countdonw_start_ticket = systicket_get_now_ms();
        thisDevice.countdonwnum_s = thisDevice.countdonw_s_setting_num;
        thisDevice.countdonwnum = compute_countdown_num(thisDevice.countdonwnum_s);

        //启动设备
      }
    }
  }
};

void do_debug_light_state(zsimple_timer_t* handler) {
  static uint8_t debug_led_state = 1;
  debug_led_state = !debug_led_state;
  port_debug_set(debug_led_state);
}

void init_all_subdevice_state() {
  port_debug_set(false);
  port_fan_set(false);
  port_led0_set(false);
  port_led1_set(false);
  port_led2_set(false);
  port_led3_set(false);
  port_led_r_set(false);
  port_led_g_set(false);
  port_led_b_set(false);
}

int main(void) {
  SystemInit();            //配置系统时钟
  DeviceClockAllEnable();  //打开所有外设时钟
  systicket_init();

  /*系统初始化*/
  zgpio_init_all_gpio();                            //
  port_init();                                      //
  init_all_subdevice_state();                       //
  printf("==========OZONE_GENERATOR==========\n");  //
  printf("= manufactor: iflytop\n");                //
  printf("= version   : %s\n", VERSION);            //
  printf("=\n");                                    //

  /*组件初始化*/
  zsimple_timer_module_init(zsimple_timer_mem, ZARR_SIZE(zsimple_timer_mem), systicket_get_now_ms);  //定时器模块初始化
  zkey_init(&key_module);                                                                            //按键初始化

  port_fan_set(true);
  port_ozone_pwm_set_duty(30000, 10 * 1000);
  port_ozone_pwm_start();

  debuglighttimer = zsimple_timer_alloc();
  zsimple_timer_trigger_static(debuglighttimer, 300, INFINITE_TIMES /*触发次数:*/, true, do_debug_light_state);

  lcs_count_donwload_light__set_count_num(3);
  lcs_status_light__set_color(/*r:*/ true, /*g:*/ false, /*b:*/ false);

  while (true) {
    //按键扫描逻辑
    DO_IT_EACH_MS(KEY_PERIOD) { zkey_do_loop_in_each_period(NULL); }
    END();

    zsimple_timer_schedule();
    lcs_shcedule();
    // test_all_light();
  }
}