清除编码器1按键好使，清除编码器2按键不好使，需要排查问题

LWIP.ioc

@@ -140,12 +140,14 @@ PC6.Signal=S_TIM8_CH1
 PC7.GPIOParameters=GPIO_PuPd
 PC7.GPIO_PuPd=GPIO_PULLUP
 PC7.Signal=S_TIM8_CH2
-PD0.GPIOParameters=GPIO_Label
+PD0.GPIOParameters=GPIO_PuPd,GPIO_Label
 PD0.GPIO_Label=KEY0
+PD0.GPIO_PuPd=GPIO_PULLUP
 PD0.Locked=true
 PD0.Signal=GPIO_Input
-PD1.GPIOParameters=GPIO_Label
+PD1.GPIOParameters=GPIO_PuPd,GPIO_Label
 PD1.GPIO_Label=KEY1
+PD1.GPIO_PuPd=GPIO_PULLUP
 PD1.Locked=true
 PD1.Signal=GPIO_Input
 PD12.GPIOParameters=GPIO_PuPd

MDK-ARM/LWIP.uvoptx

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="UTF-8"?>
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
 
   <SchemaVersion>1.0</SchemaVersion>
@@ -45,7 +45,7 @@
         <PageWidth>79</PageWidth>
         <PageLength>66</PageLength>
         <TabStop>8</TabStop>
-        <ListingPath />
+        <ListingPath></ListingPath>
       </OPTLEX>
       <ListingPage>
         <CreateCListing>1</CreateCListing>
@@ -104,16 +104,16 @@
         <bSchkAxf>0</bSchkAxf>
         <bTchkAxf>0</bTchkAxf>
         <nTsel>3</nTsel>
-        <sDll />
-        <sDllPa />
-        <sDlgDll />
-        <sDlgPa />
-        <sIfile />
-        <tDll />
-        <tDllPa />
-        <tDlgDll />
-        <tDlgPa />
-        <tIfile />
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
         <pMon>BIN\CMSIS_AGDI.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
@@ -130,12 +130,12 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ARMDBGFLAGS</Key>
-          <Name />
+          <Name></Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
           <Key>DLGUARM</Key>
-          <Name />
+          <Name></Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -195,19 +195,19 @@
         <newCpu>0</newCpu>
         <uProt>0</uProt>
       </DebugFlag>
-      <LintExecutable />
-      <LintConfigFile />
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
       <bLintAuto>0</bLintAuto>
       <bAutoGenD>0</bAutoGenD>
       <LntExFlags>0</LntExFlags>
-      <pMisraName />
-      <pszMrule />
-      <pSingCmds />
-      <pMultCmds />
-      <pMisraNamep />
-      <pszMrulep />
-      <pSingCmdsp />
-      <pMultCmdsp />
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
         <EnableFlashSeq>0</EnableFlashSeq>

Src/freertos.c

@@ -157,13 +157,7 @@ void MX_FREERTOS_Init(void) {
 void StartDefaultTask(void const * argument)
 {
   /* init code for LWIP */
-  if (config_get()->obtaining_ip_mode == OBTAINING_IP_MODE_STATIC){
-    MX_LWIP_STATIC_Init();
-  }else if (config_get()->obtaining_ip_mode == OBTAINING_IP_MODE_DHCP){
   MX_LWIP_Init();
-  }else{
-    printf("lwip error\r\n");
-  }
   /* USER CODE BEGIN StartDefaultTask */
   osThreadDef(mainTask, StartMainTask, osPriorityNormal, 0, 1024);
   mainTaskHandle = osThreadCreate(osThread(mainTask), NULL);

Src/gpio.c

@@ -85,7 +85,7 @@ void MX_GPIO_Init(void)
   /*Configure GPIO pins : PDPin PDPin */
   GPIO_InitStruct.Pin = KEY0_Pin|KEY1_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
   HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
 
   /*Configure GPIO pin : PtPin */

usersrc/usermain.c

@@ -22,8 +22,8 @@
 
 static uint16_t s_key_long_press_time_ms = 3000;
 
-static inline bool clear_encoder_1_key_get_status() { return HAL_GPIO_ReadPin(GPIOE, GPIO_PIN_4); }
-static inline bool clear_encoder_2_key_get_status() { return HAL_GPIO_ReadPin(GPIOE, GPIO_PIN_3); }
+static inline bool clear_encoder_1_key_get_status() { return HAL_GPIO_ReadPin(KEY0_GPIO_Port, KEY0_Pin); }
+static inline bool clear_encoder_2_key_get_status() { return HAL_GPIO_ReadPin(KEY1_GPIO_Port, KEY1_Pin); }
 
 static void onkey(zkey_t *key, zkey_state_t key_state);
 static zkey_t s_keys[] = {
@@ -105,14 +105,14 @@ void user_main()
 
   encoder_all_start();
   udp_client_init();
-  // zkey_init(&s_key_module);
+  zkey_init(&s_key_module);
   // port_uart_start_all_uart_receive();
 
   while (1)
   {
     // udp_client_genlock_and_esync_active();
     // udp_client_active();
-    // zkey_schedule();
+    zkey_schedule();
     udp_client_recv();
     // at_cmd_processer_try_process_data();
     // encoder_light_schedule();