可以点亮两个RGB灯

MDK-ARM/LWIP.uvoptx

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="UTF-8"?>
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
 
   <SchemaVersion>1.0</SchemaVersion>
@@ -45,7 +45,7 @@
         <PageWidth>79</PageWidth>
         <PageLength>66</PageLength>
         <TabStop>8</TabStop>
-        <ListingPath />
+        <ListingPath></ListingPath>
       </OPTLEX>
       <ListingPage>
         <CreateCListing>1</CreateCListing>
@@ -104,16 +104,16 @@
         <bSchkAxf>0</bSchkAxf>
         <bTchkAxf>0</bTchkAxf>
         <nTsel>3</nTsel>
-        <sDll />
-        <sDllPa />
-        <sDlgDll />
-        <sDlgPa />
-        <sIfile />
-        <tDll />
-        <tDllPa />
-        <tDlgDll />
-        <tDlgPa />
-        <tIfile />
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
         <pMon>BIN\CMSIS_AGDI.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
@@ -130,12 +130,12 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ARMDBGFLAGS</Key>
-          <Name />
+          <Name></Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
           <Key>DLGUARM</Key>
-          <Name />
+          <Name></Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -153,7 +153,7 @@
           <Name>-U-O142 -O2254 -S0 -C0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F407ZETx$CMSIS\Flash\STM32F4xx_512.FLM)</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint />
+      <Breakpoint/>
       <WatchWindow1>
         <Ww>
           <count>0</count>
@@ -195,19 +195,19 @@
         <newCpu>0</newCpu>
         <uProt>0</uProt>
       </DebugFlag>
-      <LintExecutable />
-      <LintConfigFile />
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
       <bLintAuto>0</bLintAuto>
       <bAutoGenD>0</bAutoGenD>
       <LntExFlags>0</LntExFlags>
-      <pMisraName />
-      <pszMrule />
-      <pSingCmds />
-      <pMultCmds />
-      <pMisraNamep />
-      <pszMrulep />
-      <pSingCmdsp />
-      <pMultCmdsp />
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
         <EnableFlashSeq>0</EnableFlashSeq>

usersrc/encoder.c

@@ -76,14 +76,14 @@ bool encoder_read_with_encoder(encoder_usage_t encoder, uint32_t *encoder_value)
 
 void encoder_light_schedule(void)
 {
-    if (camera_encoder_state == STANDBY)
-    {
-        if (sys_haspassedms(camera_encoder_lastprocess) > 500)
-        {
-            camera_encoder_lastprocess = HAL_GetTick();
-            HAL_GPIO_TogglePin(ENCODER_LIGHT_GPIO_Port, ENCODER_LIGHT_Pin);
-        }
-    }
+    // if (camera_encoder_state == STANDBY)
+    // {
+    //     if (sys_haspassedms(camera_encoder_lastprocess) > 500)
+    //     {
+    //         camera_encoder_lastprocess = HAL_GetTick();
+    //         HAL_GPIO_TogglePin(ENCODER_LIGHT_GPIO_Port, ENCODER_LIGHT_Pin);
+    //     }
+    // }
 
     if (driven_encoder_gear_state == STANDBY)
     {
@@ -104,12 +104,12 @@ void encoder_set_state(encoder_usage_t encoder, encoder_light_state_t state)
         if (state == STANDBY)
         {
             camera_encoder_lastprocess = HAL_GetTick();
-            HAL_GPIO_TogglePin(ENCODER_LIGHT_GPIO_Port, ENCODER_LIGHT_Pin);
+            // HAL_GPIO_TogglePin(ENCODER_LIGHT_GPIO_Port, ENCODER_LIGHT_Pin);
         }
         else if (state == WORKING)
         {
             /* 如果工作状态的时候触发了genlock等，灯的状态不应该变成待机状态，只有同为待机的时候闪烁，上层写的时候需要加判断 */
-            HAL_GPIO_WritePin(ENCODER_LIGHT_GPIO_Port, ENCODER_LIGHT_Pin, GPIO_PIN_RESET);
+            // HAL_GPIO_WritePin(ENCODER_LIGHT_GPIO_Port, ENCODER_LIGHT_Pin, GPIO_PIN_RESET);
         }
     }
     else if (encoder == DRIVEN_ENCODER_GEAR)

usersrc/usermain.c

@@ -103,6 +103,13 @@ void user_main()
   printf("==============ethernet_sound_acquisition_card=============\r\n");
   printf("version %d.%d", VERSION_MAIN_ID, VERSION_SUB_ID);
 
+  HAL_GPIO_WritePin(DIS_R1_GPIO_Port, DIS_R1_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(DIS_G1_GPIO_Port, DIS_G1_Pin, GPIO_PIN_SET);
+  HAL_GPIO_WritePin(DIS_B1_GPIO_Port, DIS_B1_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(DIS_R2_GPIO_Port, DIS_R2_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(DIS_G2_GPIO_Port, DIS_G2_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(DIS_B2_GPIO_Port, DIS_B2_Pin, GPIO_PIN_SET);
+
   encoder_all_start();
   udp_client_init();
   zkey_init(&s_key_module);