Print timings at standard PC speeds. The minimum cycle times for the

3 supported CAS latency values do not necessarily match standard
speeds, and even if they do, they may not cover all standard speeds.
Display the timings at all standard supported speeds. This makes it
easier to figure out which memory modules will work well together
without tinkering with BIOS options.


git-svn-id: http://lm-sensors.org/svn/i2c-tools/trunk@6102 7894878c-1315-0410-8ee3-d5d059ff63e0

CHANGES

@@ -14,7 +14,7 @@ SVN HEAD
                 Print DDR and DDR2 core timings for all supported CAS values
                 Print DDR2 equivalent speed of tCK max
                 Don't print undefined DDR2 SDRAM timings
-		Print DDR and DDR2 core timings for all standard speeds
+		Print SDR, DDR and DDR2 core timings for all standard speeds
                 Update manufacturer IDs
                 Make DDR3 manufacturer count parity error non-fatal
                 Strip former manufacturer name in side-by-side output mode

eeprom/decode-dimms

@@ -604,6 +604,7 @@ sub decode_sdr_sdram($)
 {
 	my $bytes = shift;
 	my $temp;
+	my ($ctime, $ctime1, $ctime2, $ctime_min);
 
 # SPD revision
 	# Starting with SPD revision 1.2, this byte is encoded in BCD
@@ -637,7 +638,7 @@ sub decode_sdr_sdram($)
 	my $trcd;
 	my $trp;
 	my $tras;
-	my $ctime = ($bytes->[9] >> 4) + ($bytes->[9] & 0xf) * 0.1;
+	$ctime_min = $ctime = ($bytes->[9] >> 4) + ($bytes->[9] & 0xf) * 0.1;
 
 	$trcd = $bytes->[29];
 	$trp = $bytes->[27];
@@ -737,6 +738,7 @@ sub decode_sdr_sdram($)
 		else {
 			$temp += 15 if $temp < 4;
 			$temp += ($bytes->[23] & 0xf) * 0.1;
+			$ctime1 = $temp;
 		}
 		$cycle_time .= "\n$temp ns at CAS ".$cas[$#cas-1];
 
@@ -754,6 +756,7 @@ sub decode_sdr_sdram($)
 		if ($temp == 0) { $temp = "Undefined!"; }
 		else {
 			$temp += ($bytes->[25] & 0x3) * 0.25;
+			$ctime2 = $temp;
 		}
 		$cycle_time .= "\n$temp ns at CAS ".$cas[$#cas-2];
 
@@ -780,6 +783,26 @@ sub decode_sdr_sdram($)
 	if ($bytes->[21] & 128) { $temp .= "Undefined (bit 7)\n"; }
 	printl_cond($bytes->[21], "SDRAM Module Attributes", $temp);
 
+# standard DDR speeds
+	prints("Timings at Standard Speeds");
+	foreach $ctime (7.5, 10, 15) {
+		my $best_cas;
+
+		# Find min CAS latency at this speed
+		if (defined $ctime2 && $ctime >= $ctime2) {
+			$best_cas = $cas[$#cas-2];
+		} elsif (defined $ctime1 && $ctime >= $ctime1) {
+			$best_cas = $cas[$#cas-1];
+		} else {
+			$best_cas = $cas[$#cas];
+		}
+
+		printl_cond($ctime >= $ctime_min,
+			    "tCL-tRCD-tRP-tRAS as PC" . int(1000 / $ctime),
+			    ddr_core_timings($best_cas, $ctime,
+					     $trcd, $trp, $tras));
+	}
+
 	$temp = "";
 	if ($bytes->[22] & 1) { $temp .= "Supports Early RAS# Recharge\n"; }
 	if ($bytes->[22] & 2) { $temp .= "Supports Auto-Precharge\n"; }