Add support for word register access mode.

git-svn-id: http://lm-sensors.org/svn/i2c-tools/trunk@5149 7894878c-1315-0410-8ee3-d5d059ff63e0

stub/i2c-stub-from-dump

@@ -1,6 +1,6 @@
 #!/usr/bin/perl -w
 #
-# Copyright (C) 2007       Jean Delvare <khali@linux-fr.org>
+# Copyright (C) 2007-2008  Jean Delvare <khali@linux-fr.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -22,7 +22,7 @@
 # a device you do not have access to, but of which you have a dump.
 
 use strict;
-use vars qw($bus_nr $addr $count);
+use vars qw($bus_nr $addr $bytes $words);
 
 # Kernel version detection code by Mark M. Hoffman,
 # copied from sensors-detect.
@@ -66,6 +66,42 @@ sub get_i2c_stub_bus_number
 	return $nr;
 }
 
+sub process_dump
+{
+	my $dump = shift;
+
+	open(DUMP, $dump) || die "Can't open $dump: $!\n";
+ OUTER_LOOP:
+	while (<DUMP>) {
+		if (m/^([0-9a-f]0):(( [0-9a-f]{2}){16})/) {
+			# Byte dump
+			my $offset = hex($1);
+			my @values = split(/ /, $2);
+			shift(@values);
+			for (my $i = 0; $i < 16 && (my $val = shift(@values)); $i++) {
+				last OUTER_LOOP if system("i2cset", "-y",
+					$bus_nr, $addr,
+					sprintf("0x\%02x", $offset+$i),
+					"0x$val", "b");
+				$bytes++;
+			}
+		} elsif (m/^([0-9a-f][08]):(( [0-9a-f]{4}){8})/) {
+			# Word dump
+			my $offset = hex($1);
+			my @values = split(/ /, $2);
+			shift(@values);
+			for (my $i = 0; $i < 8 && (my $val = shift(@values)); $i++) {
+				last OUTER_LOOP if system("i2cset", "-y",
+					$bus_nr, $addr,
+					sprintf("0x\%02x", $offset+$i),
+					"0x$val", "w");
+				$words++;
+			}
+		}
+	}
+	close(DUMP);
+}
+
 if ($>) {
 	print "You must be root to use this script\n";
 	exit 1;
@@ -95,33 +131,22 @@ if (kernel_version_at_least(2, 6, 19)) {
 sleep(1); # udev may take some time to create the device node
 
 $bus_nr = get_i2c_stub_bus_number();
+$bytes = $words = 0;
 
 # We don't want to see the output of 256 i2cset
 open(SAVEOUT, ">&STDOUT");
 open(STDOUT, ">/dev/null");
+process_dump($ARGV[1]);
+close(STDOUT);
 
-$count = 0;
-open(DUMP, $ARGV[1]) || die "Can't open $ARGV[1]: $!\n";
-OUTER_LOOP:
-while (<DUMP>) {
-	next unless m/^([0-9a-f]0):(( [0-9a-f]{2}){16})/;
-	my $offset = hex($1);
-	my @values = split(/ /, $2);
-	shift(@values);
-	for (my $i = 0; $i < 16 && (my $val = shift(@values)); $i++) {
-		last OUTER_LOOP if system("i2cset", "-y",
-			$bus_nr, $addr,
-			sprintf("0x\%02x", $offset+$i),
-			sprintf("0x\%02x", hex($val)), "b");
-		$count++;
-	}
+if ($bytes) {
+	printf SAVEOUT "$bytes byte values written to \%d-\%04x\n",
+		$bus_nr, oct($addr);
 }
-close(DUMP);
-close(STDOUT);
 
-if ($count) {
-	printf SAVEOUT "$count byte values written to \%d-\%04x\n",
+if ($words) {
+	printf SAVEOUT "$words word values written to \%d-\%04x\n",
 		$bus_nr, oct($addr);
 }
 
-exit($count == 0);
+exit($bytes + $words == 0);

stub/i2c-stub-from-dump.8

@@ -1,4 +1,4 @@
-.TH I2C-STUB-FROM-DUMP 8 "November 2007"
+.TH I2C-STUB-FROM-DUMP 8 "March 2008"
 .SH NAME
 i2c-stub-from-dump \- feed i2c-stub with a dump file
 
@@ -26,7 +26,9 @@ chip in question lives at address 0x4c on I2C bus 0, you would run:
         i2cdump -y 0 0x4c b > chip.dump
 
 Adjust the bus number and chip address for your case. i2cdetect can help
-you find out their values.
+you find out their values. If the device uses word (16-bit) register
+access instead of the traditional byte (8-bit) access, use mode \fBw\fR
+instead of \fBb\fR.
 
 Copy the dump file to system B.
 
@@ -40,14 +42,11 @@ Again, adjust the address as needed.
 
 .SH LIMITATIONS
 There are some limitations to the kind of devices that can be handled:
-.IP \(bu "\w'\(bu'u+1n"
-Device must only use byte register access. i2c-stub supports word
-access but i2c-stub-from-dump doesn't (yet).
 .IP \(bu
 Device must not have banks (as most Winbond devices do).
 
 .SH SEE ALSO
- i2cdump(8), i2cdetect(8), i2cset(8)
+i2cdump(8), i2cdetect(8), i2cset(8)
 
 .SH AUTHOR
 Jean Delvare