These programs are used to read and write eeproms.

Use eeprom for small eeproms with one-byte addresses:
	24C01, 24C01A, 24C02, 24C04, 24C08, and 24C16
	It works only on true i2c bus adapters.
	See README.eeprom for details.

Use eepromer for large eeproms with two-byte addresses:
	24C32, 24C64, 24C128, 24C256, and 24C512
	It works only on true i2c bus adapters.
	See README.eepromer for details.

Use eeprog for either small or large eeproms.
	Use the -16 switch for large eeproms.
	It works on both i2c and smbus bus adapters.
	See README.eeprog for details.


!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Warning !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!                                                                           !
!!! These programs should only be used on external busses such as i2c-pport   !
!!! unless you REALLY know what you are doing.                                !
!!!                                                                           !
!!! Your computer probably contains eeproms for saving data vital to its      !
!!! operation. If you are not careful you might overwrite this data with      !
!!! this program and your computer may no longer boot!                        !
!!!                                                                           !
!!! An example are the EEPROMS on your SDRAM DIMMs, your computer may no      !
!!! longer detect the RAM module rendering it essentially USELESS!            !
!!!                                                                           !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Warning !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!