#pragma once

namespace iflytop {
namespace err {
using namespace std;

#define ERROR_CODE(errortype, suberrorcode) (errortype + suberrorcode)

typedef enum {
  ksucc = ERROR_CODE(0, 0),
  kfail = ERROR_CODE(0, 1),

  /**
   * @brief 通信错误
   */
  kce_overtime           = ERROR_CODE(1000, 0),
  kce_noack              = ERROR_CODE(1000, 1),
  kce_errorack           = ERROR_CODE(1000, 2),
  kce_device_offline     = ERROR_CODE(1000, 3),
  kce_parse_json_err     = ERROR_CODE(1000, 4),
  kce_subdevice_overtime = ERROR_CODE(1000, 5),

  /**
   * @brief 数据库错误
   */
  kdbe_user_not_exist  = ERROR_CODE(2000, 0),
  kdbe_catch_exception = ERROR_CODE(2000, 1),

  /**
   * @brief 硬件错误
   */
  kharde_unfound = ERROR_CODE(3000, 0),
  /**
   * @brief 程序运行错误
   */
  kre_catch_exception = ERROR_CODE(4000, 0),
  /**
   * @brief 应用交互基本错误
   */
  kinteraction_error_passwd_error   = ERROR_CODE(5000, 0),  // 密码错误
  kinteraction_error_user_not_exist = ERROR_CODE(5000, 1),  // 用户不存在
  /**
   * @brief 系统错误
   */
  ksys_error             = ERROR_CODE(6000, 0),
  ksys_create_file_error = ERROR_CODE(6000, 1),
  ksys_create_dir_error  = ERROR_CODE(6000, 2),
  ksys_open_file_error   = ERROR_CODE(6000, 3),
  ksys_open_dir_error    = ERROR_CODE(6000, 4),
  ksys_read_file_error   = ERROR_CODE(6000, 5),
  ksys_write_file_error  = ERROR_CODE(6000, 6),
  ksys_close_file_error  = ERROR_CODE(6000, 7),
  ksys_close_dir_error   = ERROR_CODE(6000, 8),
  ksys_delete_file_error = ERROR_CODE(6000, 9),
  ksys_delete_dir_error  = ERROR_CODE(6000, 10),
  ksys_copy_file_error   = ERROR_CODE(6000, 11),

  /**
   * @brief STMP2错误
   */
  kSMTP2_NoError             = ERROR_CODE(10000, 0),   // 无错误
  kSMTP2_InitFail            = ERROR_CODE(10000, 1),   // 初始化失败
  kSMTP2_InvalidCmd          = ERROR_CODE(10000, 2),   // 无效命令
  kSMTP2_InvalidArg          = ERROR_CODE(10000, 3),   // 无效参数
  kSMTP2_PressureSensorError = ERROR_CODE(10000, 4),   // 压力传感器故障
  kSMTP2_OverPressure        = ERROR_CODE(10000, 5),   // 超过压力
  kSMTP2_LLDError            = ERROR_CODE(10000, 6),   // LLD 错误
  kSMTP2_DeviceNotInit       = ERROR_CODE(10000, 7),   // 设备未初始化
  kSMTP2_TipPopError         = ERROR_CODE(10000, 8),   // Tip 弹出错误
  kSMTP2_PumpOverload        = ERROR_CODE(10000, 9),   // 泵过载
  kSMTP2_TipDrop             = ERROR_CODE(10000, 10),  // Tip 脱落
  kSMTP2_CanBusError         = ERROR_CODE(10000, 11),  // CAN 总线故障
  kSMTP2_InvalidChecksum     = ERROR_CODE(10000, 12),  // 无效校验和
  kSMTP2_EEPROMError         = ERROR_CODE(10000, 13),  // EEPROM 故障
  kSMTP2_CmdBufferEmpty      = ERROR_CODE(10000, 14),  // 命令缓冲区为空
  kSMTP2_CmdBufferOverflow   = ERROR_CODE(10000, 15),  // 命令溢出
  kSMTP2_TipBlock            = ERROR_CODE(10000, 16),  // Tip 堵塞
  kSMTP2_AirSuction          = ERROR_CODE(10000, 17),  // 吸入空气
  kSMTP2_Bubble              = ERROR_CODE(10000, 18),  // 液体中有气泡/泡沫
  kSMTP2_VolumeError         = ERROR_CODE(10000, 19),  // 吸取/分配量不准确
  /**
   * @brief 50000通用
   */
  kcommon_error_device_not_zero              = ERROR_CODE(50000, 0),   // 设备未归零
  kcommon_error_over_temperature             = ERROR_CODE(50000, 1),   // 过温
  kcommon_error_over_voltage                 = ERROR_CODE(50000, 2),   // 过压
  kcommon_error_param_out_of_range           = ERROR_CODE(50000, 3),   // 参数超出范围
  kcommon_error_not_found_zero_point         = ERROR_CODE(50000, 4),   // 未找到零点
  kcommon_error_not_found_x_zero_point       = ERROR_CODE(50000, 5),   // 未找到零点
  kcommon_error_not_found_y_zero_point       = ERROR_CODE(50000, 6),   // 未找到零点
  kcommon_error_x_leave_away_zero_point_fail = ERROR_CODE(50000, 7),   // 离开零点失败
  kcommon_error_y_leave_away_zero_point_fail = ERROR_CODE(50000, 8),   // 离开零点失败
  kcommon_error_operation_not_support        = ERROR_CODE(50000, 9),   // 操作不支持
  kcommon_error_device_is_busy               = ERROR_CODE(50000, 10),  // 设备忙
  kcommon_error_device_is_offline            = ERROR_CODE(50000, 11),  // 设备离线
  kcommon_error_break_by_user                = ERROR_CODE(50000, 12),  // 用户中断

} error_t;
}  // namespace err
}  // namespace iflytop