zprotocols
/
zcancmder
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

update

master
zhaohe 2 years ago
parent
358d158302
commit
3703970068
4 changed files with 49 additions and 52 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 6
      api/basic_type.hpp
  2. 45
      api/i_pipette_module.hpp
  3. 38
      api/i_step_motor_ctrl_module.hpp
  4. 10
      zcancmder_protocol.hpp

6
api/basic_type.hpp
View File

@ -27,9 +27,9 @@ typedef enum {
} MotorStopType_t;
typedef enum {
kmodule_statu_idle,
kmodule_statu_work,
kmodule_statu_exception,
kmodule_statu_idle = 0,
kmodule_statu_work = 1,
kmodule_statu_exception = 2,
} module_statu_type_t;
#ifndef ZSTRUCT

45
api/i_pipette_module.hpp
View File

@ -11,28 +11,22 @@ namespace iflytop {
using namespace std;
class I_PipetteModule {
public:
#if 0
0. 设备信息
1. Z轴步数和高度的换算系数
2. Z轴偏移
3. Z轴最大高度
1. 预设参数（试管信息）
1.触底高度
2.平台移动高度
3.体积高度公式
4.液面跟随
3. 平台参数设置（平台信息）
1. 取tip高度
2. 丢tip高度
3. 转移高度
4. tip头型号
#endif
ZSTRUCT(devicepara_t, u8 z_shaft; s16 z_shift; s16 z_step2mm; u16 z_max_height_mm;);
ZSTRUCT(tubepara_t, uint8_t id; int16_t bottom_height_mm; uint8_t follow_liquid;);
ZSTRUCT(tippara_t, uint8_t id; int16_t tiphight;);
ZSTRUCT(platformpara_t, uint8_t id; int16_t take_tip_height_mm; int16_t remove_tip_height_mm; int16_t transfer_height_mm;);
#pragma pack(1)
ZSTRUCT(base_param_t,
int16_t take_tip_height_mm; //
int16_t remove_tip_height_mm; //
int16_t transfer_height_mm; //
int16_t tiphight;);
typedef struct {
uint8_t status; // 设备状态
uint8_t io_state; // IO0:z_zero_io/IO1:hastip/
int16_t zpos_mm; // z轴位置
int16_t pipette_ul; // 移液枪液量
} status_t;
#pragma pack()
// ZSTRUCT(action_cb_status_t, u8 exec_status;);
@ -42,9 +36,14 @@ class I_PipetteModule {
virtual int32_t zero_pos_calibrate(action_cb_status_t status_cb) = 0;
virtual int32_t reset_device(action_cb_status_t status_cb) = 0;
virtual int32_t take_tip(int tipid, action_cb_status_t status_cb) = 0;
virtual int32_t take_tip(action_cb_status_t status_cb) = 0;
virtual int32_t remove_tip(action_cb_status_t status_cb) = 0;
// 取液(平台参数，试管参数, 取样体积，取样高度，摇匀次数，摇匀体积)
virtual int32_t take_and_split_liquid(u8 tube_id, s16 liquid_volume, s16 zhight, s16 abs_zhight, s16 shake_times, s16 shake_volume, action_cb_status_t status_cb) = 0;
virtual int32_t set_base_param(const base_param_t &base_param) = 0;
virtual int32_t get_base_param(base_param_t &base_param) = 0;
virtual int32_t get_status(status_t &status) = 0;
};
} // namespace iflytop

38
api/i_step_motor_ctrl_module.hpp
View File

@ -41,29 +41,25 @@ class I_StepMotorCtrlModule {
*******************************************************************************/
typedef struct {
u8 x_shaft;
u8 ihold;
u8 irun;
u16 iholddelay;
s32 x_shaft;
s32 distance_scale; // 0.001
s32 shift_x;
s32 ihold;
s32 irun;
u16 iholddelay;
s32 acc;
s32 dec;
s32 maxspeed;
s32 min_x;
s32 max_x;
} run_param_t;
typedef struct {
uint8_t pad;
} warning_limit_param_t;
//
s32 shift_x;
s32 run_to_zero_move_to_zero_max_d;
s32 run_to_zero_leave_from_zero_max_d;
s32 run_to_zero_speed;
s32 run_to_zero_dec;
} base_param_t;
typedef struct {
u32 move_to_zero_max_d;
u32 leave_from_zero_max_d;
u32 speed;
u32 dec;
} run_to_zero_param_t;
#pragma pack()
public:
@ -79,12 +75,16 @@ class I_StepMotorCtrlModule {
virtual int32_t stop(uint8_t stopType) = 0;
virtual int32_t force_change_current_pos(int32_t x) = 0;
virtual int32_t move_to_block(int32_t tox) = 0;
virtual int32_t move_by_block(int32_t dx) = 0;
virtual int32_t move_to_zero_block() = 0;
virtual int32_t move_to_zero_with_calibrate_block(int32_t x) = 0;
virtual int32_t read_version(version_t& version) = 0;
virtual int32_t read_status(status_t& status) = 0;
virtual int32_t read_detailed_status(detailed_status_t& debug_info) = 0;
virtual int32_t set_run_param(uint8_t operation, const run_param_t& param, run_param_t& ack) = 0;
virtual int32_t set_run_to_zero_param(uint8_t operation, const run_to_zero_param_t& param, run_to_zero_param_t& ack) = 0;
virtual int32_t set_warning_limit_param(uint8_t operation, const warning_limit_param_t& param, warning_limit_param_t& ack) = 0;
virtual int32_t set_base_param(const base_param_t& param) = 0;
virtual int32_t get_base_param(base_param_t& param) = 0;
};
} // namespace iflytop

10
zcancmder_protocol.hpp
View File

@ -57,9 +57,8 @@ typedef enum {
kcmd_step_motor_ctrl_read_status = CMDID(1007, 51), // 读取模块精简状态信息
kcmd_step_motor_ctrl_read_detailed_status = CMDID(1007, 52), // 读取模块详细状态信息
kcmd_step_motor_ctrl_set_run_param = CMDID(1007, 100), // 设置运行参数
kcmd_step_motor_ctrl_set_warning_limit_param = CMDID(1007, 101), // 设置警告限制参数
kcmd_step_motor_ctrl_set_run_to_zero_param = CMDID(1007, 102), // 设置归零参数
kcmd_step_motor_ctrl_set_base_param = CMDID(1007, 100), // 设置运行参数
kcmd_step_motor_ctrl_get_base_param = CMDID(1007, 101), // 设置运行参数
/*******************************************************************************
* |Module_1008:舵机 *
@ -247,9 +246,8 @@ ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_read_version, CMD(u8 id;), ACK(u8 id; I_Ste
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_read_status, CMD(u8 id;), ACK(u8 id; I_StepMotorCtrlModule::status_t ack;));
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_read_detailed_status, CMD(u8 id;), ACK(u8 id; I_StepMotorCtrlModule::detailed_status_t ack;));
// SET
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_set_run_param, CMD(u8 id; u8 opt_type; I_StepMotorCtrlModule::run_param_t param;), ACK(u8 id; I_StepMotorCtrlModule::run_param_t ack;));
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_set_warning_limit_param, CMD(u8 id; u8 opt_type; I_StepMotorCtrlModule::warning_limit_param_t param;), ACK(u8 id; I_StepMotorCtrlModule::warning_limit_param_t ack;));
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_set_run_to_zero_param, CMD(u8 id; u8 opt_type; I_StepMotorCtrlModule::run_to_zero_param_t param;), ACK(u8 id; I_StepMotorCtrlModule::run_to_zero_param_t ack;));
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_set_base_param, CMD(u8 id; u8 opt_type; I_StepMotorCtrlModule::base_param_t param;), ACK(u8 id;));
ZPACKET_CMD_ACK(kcmd_step_motor_ctrl_get_base_param, CMD(u8 id;), ACK(u8 id; I_StepMotorCtrlModule::base_param_t ack;));
/*******************************************************************************
* |Module_1008:舵机 *

Write Preview
Loading…
Cancel
Save