#pragma once
#include <stdint.h>

namespace iflytop {
namespace err {
using namespace std;

#define ERROR_CODE(errortype, suberrorcode) (errortype + suberrorcode)

typedef enum {
  ksucc = ERROR_CODE(0, 0),
  kfail = ERROR_CODE(0, 1),

  /**
   * @brief 系统错误
   */
  ksys_error             = ERROR_CODE(100, 0),
  ksys_create_file_error = ERROR_CODE(100, 1),
  ksys_create_dir_error  = ERROR_CODE(100, 2),
  ksys_open_file_error   = ERROR_CODE(100, 3),
  ksys_open_dir_error    = ERROR_CODE(100, 4),
  ksys_read_file_error   = ERROR_CODE(100, 5),
  ksys_write_file_error  = ERROR_CODE(100, 6),
  ksys_close_file_error  = ERROR_CODE(100, 7),
  ksys_close_dir_error   = ERROR_CODE(100, 8),
  ksys_delete_file_error = ERROR_CODE(100, 9),
  ksys_delete_dir_error  = ERROR_CODE(100, 10),
  ksys_copy_file_error   = ERROR_CODE(100, 11),

  /**
   * @brief 50000通用
   */
  kce_device_not_zero               = ERROR_CODE(10000, 0),   // 设备未归零
  kce_over_temperature              = ERROR_CODE(10000, 1),   // 过温
  kce_over_voltage                  = ERROR_CODE(10000, 2),   // 过压
  kce_param_out_of_range            = ERROR_CODE(10000, 3),   // 参数超出范围
  kce_not_found_zero_point          = ERROR_CODE(10000, 4),   // 未找到零点
  kce_not_found_x_zero_point        = ERROR_CODE(10000, 5),   // 未找到零点
  kce_not_found_y_zero_point        = ERROR_CODE(10000, 6),   // 未找到零点
  kce_x_leave_away_zero_point_fail  = ERROR_CODE(10000, 7),   // 离开零点失败
  kce_y_leave_away_zero_point_fail  = ERROR_CODE(10000, 8),   // 离开零点失败
  kce_operation_not_support         = ERROR_CODE(10000, 9),   // 操作不支持
  kce_device_is_busy                = ERROR_CODE(10000, 10),  // 设备忙
  kce_device_is_offline             = ERROR_CODE(10000, 11),  // 设备离线
  kce_break_by_user                 = ERROR_CODE(10000, 12),  // 用户中断
  kce_overtime                      = ERROR_CODE(10000, 13),
  kce_noack                         = ERROR_CODE(10000, 14),
  kce_errorack                      = ERROR_CODE(10000, 15),
  kce_device_offline                = ERROR_CODE(10000, 16),
  kce_parse_json_err                = ERROR_CODE(10000, 17),
  kce_subdevice_overtime            = ERROR_CODE(10000, 18),
  kdbe_user_not_exist               = ERROR_CODE(10000, 19),
  kdbe_catch_exception              = ERROR_CODE(10000, 20),
  kharde_unfound                    = ERROR_CODE(10000, 21),
  kre_catch_exception               = ERROR_CODE(10000, 22),
  kinteraction_error_passwd_error   = ERROR_CODE(10000, 23),  // 密码错误
  kinteraction_error_user_not_exist = ERROR_CODE(10000, 24),  // 用户不存在
  kce_buffer_not_enough             = ERROR_CODE(10000, 25),
  kce_cmd_not_found                 = ERROR_CODE(10000, 26),
  kce_cmd_param_num_error           = ERROR_CODE(10000, 27),
  kce_no_such_module                = ERROR_CODE(10000, 28),
  kce_modbusCRC16checkfail          = ERROR_CODE(10000, 29),

  /**
   * @brief STMP2错误
   */
  kSMTP2_NoError             = ERROR_CODE(20000, 0),   // 无错误
  kSMTP2_InitFail            = ERROR_CODE(20000, 1),   // 初始化失败
  kSMTP2_InvalidCmd          = ERROR_CODE(20000, 2),   // 无效命令
  kSMTP2_InvalidArg          = ERROR_CODE(20000, 3),   // 无效参数
  kSMTP2_PressureSensorError = ERROR_CODE(20000, 4),   // 压力传感器故障
  kSMTP2_OverPressure        = ERROR_CODE(20000, 5),   // 超过压力
  kSMTP2_LLDError            = ERROR_CODE(20000, 6),   // LLD 错误
  kSMTP2_DeviceNotInit       = ERROR_CODE(20000, 7),   // 设备未初始化
  kSMTP2_TipPopError         = ERROR_CODE(20000, 8),   // Tip 弹出错误
  kSMTP2_PumpOverload        = ERROR_CODE(20000, 9),   // 泵过载
  kSMTP2_TipDrop             = ERROR_CODE(20000, 10),  // Tip 脱落
  kSMTP2_CanBusError         = ERROR_CODE(20000, 11),  // CAN 总线故障
  kSMTP2_InvalidChecksum     = ERROR_CODE(20000, 12),  // 无效校验和
  kSMTP2_EEPROMError         = ERROR_CODE(20000, 13),  // EEPROM 故障
  kSMTP2_CmdBufferEmpty      = ERROR_CODE(20000, 14),  // 命令缓冲区为空
  kSMTP2_CmdBufferOverflow   = ERROR_CODE(20000, 15),  // 命令溢出
  kSMTP2_TipBlock            = ERROR_CODE(20000, 16),  // Tip 堵塞
  kSMTP2_AirSuction          = ERROR_CODE(20000, 17),  // 吸入空气
  kSMTP2_Bubble              = ERROR_CODE(20000, 18),  // 液体中有气泡/泡沫
  kSMTP2_VolumeError         = ERROR_CODE(20000, 19),  // 吸取/分配量不准确
  kSMTP2_TipAlreadyLoad      = ERROR_CODE(20000, 20),  // Tip已经装载
  kSMTP2_TipLoadFail         = ERROR_CODE(20000, 21),

  /**
   * @brief 单片机硬件错误
   */
  kmicro_noErr        = ERROR_CODE(20050, 0),  //
  kmicro_uartSendFail = ERROR_CODE(20050, 1),  //
  kmicro_uartRecvFail = ERROR_CODE(20050, 2),  //

  /**
   * @brief modbus错误
   */

} error_t;

const char* error2str(int32_t code);

}  // namespace err
}  // namespace iflytop