iflytop_cancmder/usrc/intelligent_winding_robot_ctrl.cpp

#include "intelligent_winding_robot_ctrl.hpp"

#include <stdlib.h>
#include <string.h>
using namespace std;
using namespace iflytop;

#define TAG "IntelligentWindingRobotCtrl"

#define DO(exptr)        \
  {                      \
    int32_t ret = exptr; \
    if (ret != 0) {      \
      return ret;        \
    }                    \
  }

void IntelligentWindingRobotCtrl::processError(int32_t err) { ZLOGE(TAG, "processError: %d", err); }

void IntelligentWindingRobotCtrl::wait_module_idle(int32_t moduleid) {
  while (true) {
    int32_t status = 0;
    int32_t ecode  = m_dm->module_get_status(moduleid, &status);
    if (ecode != 0) {
      processError(ecode);
      break;
    };
    if (status == 0) break;
    if (status == 2) {
      processError(err::kfail);
      break;
    };
    zos_delay(100);
  }
}

int32_t IntelligentWindingRobotCtrl::initialize_device() { return 0; }
//   排废舵机
int32_t IntelligentWindingRobotCtrl::paifei_duoji_moveto_reset() {
  ZLOGI(TAG, "paifei_duoji_moveto_reset %d %d %d", 15, cfg.paifei_duoji_reset_pos, 330);
  DO(m_dm->motor_move_to(15, cfg.paifei_duoji_reset_pos, 2000, 0));
  wait_module_idle(15);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::paifei_duoji_moveto_press() {
  ZLOGI(TAG, "paifei_duoji_moveto_press %d %d %d", 15, cfg.paifei_duoji_press_pos, cfg.paifei_duoji_press_torque);
  DO(m_dm->motor_move_to_with_torque(15, cfg.paifei_duoji_press_pos, cfg.paifei_duoji_press_torque));
  wait_module_idle(15);
}
/**
 * @brief 绕线探测舵机
 */
int32_t IntelligentWindingRobotCtrl::raoxiantance_duoji_move_to_reset() {
  ZLOGI(TAG, "raoxiantance_duoji_move_to_reset %d %d %d", 14, cfg.raoxiantance_duoji_reset_pos, 330);
  DO(m_dm->motor_move_to(14, cfg.raoxiantance_duoji_reset_pos, 2000, 0));
  wait_module_idle(14);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::raoxiantance_duoji_move_to_get_thickness(int32_t* thickness) {
  ZLOGI(TAG, "raoxiantance_duoji_move_to_get_thickness %d %d", 14, cfg.raoxiantance_duoji_tance_zero_pos);
  DO(m_dm->motor_move_to_with_torque(14, cfg.raoxiantance_duoji_tance_zero_pos, 200));
  zos_delay(2000);

  int32_t nowpos = 0;
  DO(m_dm->motor_read_pos(14, &nowpos));

  *thickness = cfg.raoxiantance_duoji_tance_zero_pos - nowpos;
  DO(raoxiantance_duoji_move_to_reset());
  return 0;
}
/**
 * @brief 压线舵机
 */
int32_t IntelligentWindingRobotCtrl::yaxian_duoji_move_to_reset() {
  ZLOGI(TAG, "yaxian_duoji_move_to_reset %d %d %d", 13, cfg.yaxian_duoji_reset_pos, 330);
  DO(m_dm->motor_move_to(13, cfg.yaxian_duoji_reset_pos, 2000, 0));
  wait_module_idle(13);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::yaxian_duoji_move_to_press_pos() {
  ZLOGI(TAG, "yaxian_duoji_move_to_press_pos %d %d %d", 13, cfg.yaxian_duoji_press_pos, cfg.yaxian_duoji_press_torque);
  DO(m_dm->motor_move_to_with_torque(13, cfg.yaxian_duoji_press_pos, cfg.yaxian_duoji_press_torque));
  wait_module_idle(13);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::yaxian_duoji_move_to_wait_for_press_pos() {
  ZLOGI(TAG, "yaxian_duoji_move_to_wait_for_press_pos %d %d %d", 13, cfg.yaxian_duoji_wait_for_press_pos, cfg.yaxian_duoji_press_torque);
  DO(m_dm->motor_move_to_with_torque(13, cfg.yaxian_duoji_wait_for_press_pos, cfg.yaxian_duoji_press_torque));
  wait_module_idle(13);
  return 0;
}
/**
 * @brief 线拉紧舵机
 */
int32_t IntelligentWindingRobotCtrl::xianlajin_duoji_move_to_reset() {
  ZLOGI(TAG, "xianlajin_duoji_move_to_reset %d %d %d", 12, cfg.xianlajin_duoji_reset_pos, 330);
  DO(m_dm->motor_move_to(16, cfg.xianlajin_duoji_reset_pos, 2000, 0));
  wait_module_idle(16);
  return 0;
}  // 零位
int32_t IntelligentWindingRobotCtrl::xianlajin_duoji_move_to_line_entry_pos() {
  ZLOGI(TAG, "xianlajin_duoji_move_to_line_entry_pos %d %d %d", 16, cfg.xianlajin_duoji_line_entry_pos, 330);
  DO(m_dm->motor_move_to(16, cfg.xianlajin_duoji_line_entry_pos, 2000, 0));
  wait_module_idle(16);
  return 0;
}  // 入线位
int32_t IntelligentWindingRobotCtrl::xianlajin_duoji_move_to_tight_line_pos() {
  ZLOGI(TAG, "xianlajin_duoji_move_to_tight_line_pos %d %d %d", 16, cfg.xianlajin_duoji_tight_line_pos, 330);
  DO(m_dm->motor_move_to(16, cfg.xianlajin_duoji_tight_line_pos, 2000, 0));
  wait_module_idle(16);
  return 0;
}  // 拉线位置
int32_t IntelligentWindingRobotCtrl::xianlajin_duoji_move_to_loose_line_pos() {
  ZLOGI(TAG, "xianlajin_duoji_move_to_loose_line_pos %d %d %d", 16, cfg.xianlajin_duoji_loose_line_pos, 330);
  DO(m_dm->motor_move_to(16, cfg.xianlajin_duoji_loose_line_pos, 2000, 0));
  wait_module_idle(16);
  return 0;
}  // 放线位置
/**
 * @brief 夹线舵机12
 */
int32_t IntelligentWindingRobotCtrl::jiaxian_duoji_move_to_reset_pos() {
  ZLOGI(TAG, "jiaxian_duoji_move_to_reset_pos %d %d %d", 12, cfg.jiaxian_duoji_reset_pos, 330);
  DO(m_dm->motor_move_to(12, cfg.jiaxian_duoji_reset_pos, 2000, 0));
  wait_module_idle(12);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::jiaxian_duoji_move_to_clamp_pos() {
  ZLOGI(TAG, "jiaxian_duoji_move_to_clamp_pos %d %d %d", 12, cfg.jiaxian_duoji_clamp_pos, cfg.jiaxian_duoji_clamp_torque);
  DO(m_dm->motor_move_to_with_torque(12, cfg.jiaxian_duoji_clamp_pos, cfg.jiaxian_duoji_clamp_torque));
  wait_module_idle(12);
  return 0;
}
/**
 * @brief 剪刀
 */
int32_t IntelligentWindingRobotCtrl::scissors_move_reset_pos() {
  // ZLOGI(TAG, "scissors_move_reset_pos %d", 11);
  ZLOGI(TAG, "scissors_move_reset_pos");
  return 0;
}  // block
int32_t IntelligentWindingRobotCtrl::scissors_cut() {
  ZLOGI(TAG, "scissors_cut %d", 24);
  DO(m_dm->motor_move_by(24, 4095, 0, 0));
  wait_module_idle(24);
  return 0;
}  // block
/**
 * @brief 机械臂夹线舵机
 */
int32_t IntelligentWindingRobotCtrl::arm_jiaxian_duoji_move_to_reset_pos() {
  ZLOGI(TAG, "arm_jiaxian_duoji_move_to_reset_pos %d %d %d", 11, cfg.arm_jiaxian_duoji_reset_pos, 330);
  DO(m_dm->motor_move_to(11, cfg.arm_jiaxian_duoji_reset_pos, 2000, 0));
  wait_module_idle(11);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::arm_jiaxian_duoji_move_to_clamp_pos() {
  ZLOGI(TAG, "arm_jiaxian_duoji_move_to_clamp_pos %d %d %d", 11, cfg.arm_jiaxian_duoji_clamp_pos, cfg.arm_jiaxian_duoji_clamp_torque);
  DO(m_dm->motor_move_to_with_torque(11, cfg.arm_jiaxian_duoji_clamp_pos, cfg.arm_jiaxian_duoji_clamp_torque));
  wait_module_idle(11);
  return 0;
}

/**
 * @brief 机械臂钩爪
 */
int32_t IntelligentWindingRobotCtrl::arm_hook_claws_reset() {
  ZLOGI(TAG, "arm_hook_claws_reset");
  DO(m_dm->motor_move_to_zero_backward(21, 0, 0, 0, 0));
  wait_module_idle(21);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::arm_hook_claws_move_to_half_pos() {
  ZLOGI(TAG, "arm_hook_claws_move_to_half_pos");
  DO(m_dm->motor_move_to(21, cfg.arm_hook_claws_half_pos, 0, 0));
  wait_module_idle(21);
  return 0;
}
int32_t IntelligentWindingRobotCtrl::arm_hook_claws_move_to_full_pos() {
  ZLOGI(TAG, "arm_hook_claws_move_to_full_pos");
  DO(m_dm->motor_move_to(21, cfg.arm_hook_claws_full_pos, 0, 0));
  wait_module_idle(21);
  return 0;
}
/**
 * @brief XY平台
 */
int32_t IntelligentWindingRobotCtrl::xy_platform_reset() { return 0; }
/**
 * @brief Z轴
 */
int32_t IntelligentWindingRobotCtrl::z_axis_reset() { return 0; }
int32_t IntelligentWindingRobotCtrl::z_axis_move_to(int32_t pos) { return 0; }

int32_t IntelligentWindingRobotCtrl::xy_reset() { return 0; }                   // 复位
int32_t IntelligentWindingRobotCtrl::xy_move_to_zero() { return 0; }            // 移动到零位
int32_t IntelligentWindingRobotCtrl::xy_take_clip(int32_t index) { return 0; }  // 取弹夹
int32_t IntelligentWindingRobotCtrl::xy_take_line() { return 0; }               // 取线
int32_t IntelligentWindingRobotCtrl::xy_take_back_clip() { return 0; }          // 放弹夹
int32_t IntelligentWindingRobotCtrl::xy_remove_line() { return 0; }             // 移除线
/**
 * @brief
 */
int32_t IntelligentWindingRobotCtrl::start_winding() { return 0; }
int32_t IntelligentWindingRobotCtrl::stop_winding() { return 0; }
int32_t IntelligentWindingRobotCtrl::reset_and_check_device() { return 0; }
int32_t IntelligentWindingRobotCtrl::setcfg(const char* cfgname, int32_t cfgvalue) {
  if (strcmp(cfgname, "paifei_duoji_reset_pos") == 0)
    cfg.paifei_duoji_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "paifei_duoji_press_pos") == 0)
    cfg.paifei_duoji_press_pos = cfgvalue;
  else if (strcmp(cfgname, "paifei_duoji_press_torque") == 0)
    cfg.paifei_duoji_press_torque = cfgvalue;
  else if (strcmp(cfgname, "raoxiantance_duoji_reset_pos") == 0)
    cfg.raoxiantance_duoji_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "raoxiantance_duoji_tance_zero_pos") == 0)
    cfg.raoxiantance_duoji_tance_zero_pos = cfgvalue;
  else if (strcmp(cfgname, "yaxian_duoji_reset_pos") == 0)
    cfg.yaxian_duoji_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "yaxian_duoji_press_pos") == 0)
    cfg.yaxian_duoji_press_pos = cfgvalue;
  else if (strcmp(cfgname, "yaxian_duoji_press_torque") == 0)
    cfg.yaxian_duoji_press_torque = cfgvalue;
  else if (strcmp(cfgname, "yaxian_duoji_wait_for_press_pos") == 0)
    cfg.yaxian_duoji_wait_for_press_pos = cfgvalue;
  else if (strcmp(cfgname, "xianlajin_duoji_reset_pos") == 0)
    cfg.xianlajin_duoji_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "xianlajin_duoji_line_entry_pos") == 0)
    cfg.xianlajin_duoji_line_entry_pos = cfgvalue;
  else if (strcmp(cfgname, "xianlajin_duoji_tight_line_pos") == 0)
    cfg.xianlajin_duoji_tight_line_pos = cfgvalue;
  else if (strcmp(cfgname, "xianlajin_duoji_loose_line_pos") == 0)
    cfg.xianlajin_duoji_loose_line_pos = cfgvalue;
  else if (strcmp(cfgname, "jiaxian_duoji_reset_pos") == 0)
    cfg.jiaxian_duoji_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "jiaxian_duoji_clamp_pos") == 0)
    cfg.jiaxian_duoji_clamp_pos = cfgvalue;
  else if (strcmp(cfgname, "jiaxian_duoji_clamp_torque") == 0)
    cfg.jiaxian_duoji_clamp_torque = cfgvalue;
  else if (strcmp(cfgname, "arm_jiaxian_duoji_reset_pos") == 0)
    cfg.arm_jiaxian_duoji_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "arm_jiaxian_duoji_clamp_pos") == 0)
    cfg.arm_jiaxian_duoji_clamp_pos = cfgvalue;
  else if (strcmp(cfgname, "arm_jiaxian_duoji_clamp_torque") == 0)
    cfg.arm_jiaxian_duoji_clamp_torque = cfgvalue;
  else if (strcmp(cfgname, "scissors_reset_pos") == 0)
    cfg.scissors_reset_pos = cfgvalue;
  else if (strcmp(cfgname, "scissors_cut_pos") == 0)
    cfg.scissors_cut_pos = cfgvalue;
  else if (strcmp(cfgname, "arm_hook_claws_half_pos") == 0)
    cfg.arm_hook_claws_half_pos = cfgvalue;
  else if (strcmp(cfgname, "arm_hook_claws_full_pos") == 0)
    cfg.arm_hook_claws_full_pos = cfgvalue;
  return 0;
}
int32_t IntelligentWindingRobotCtrl::dumpcfg() {
  ZLOGI(TAG, "paifei_duoji_reset_pos            %d", cfg.paifei_duoji_reset_pos);
  ZLOGI(TAG, "paifei_duoji_press_pos            %d", cfg.paifei_duoji_press_pos);
  ZLOGI(TAG, "paifei_duoji_press_torque         %d", cfg.paifei_duoji_press_torque);
  ZLOGI(TAG, "raoxiantance_duoji_reset_pos      %d", cfg.raoxiantance_duoji_reset_pos);
  ZLOGI(TAG, "raoxiantance_duoji_tance_zero_pos %d", cfg.raoxiantance_duoji_tance_zero_pos);
  ZLOGI(TAG, "yaxian_duoji_reset_pos            %d", cfg.yaxian_duoji_reset_pos);
  ZLOGI(TAG, "yaxian_duoji_press_pos            %d", cfg.yaxian_duoji_press_pos);
  ZLOGI(TAG, "yaxian_duoji_press_torque         %d", cfg.yaxian_duoji_press_torque);
  ZLOGI(TAG, "yaxian_duoji_wait_for_press_pos   %d", cfg.yaxian_duoji_wait_for_press_pos);
  ZLOGI(TAG, "xianlajin_duoji_reset_pos         %d", cfg.xianlajin_duoji_reset_pos);
  ZLOGI(TAG, "xianlajin_duoji_line_entry_pos    %d", cfg.xianlajin_duoji_line_entry_pos);
  ZLOGI(TAG, "xianlajin_duoji_tight_line_pos    %d", cfg.xianlajin_duoji_tight_line_pos);
  ZLOGI(TAG, "xianlajin_duoji_loose_line_pos    %d", cfg.xianlajin_duoji_loose_line_pos);
  ZLOGI(TAG, "jiaxian_duoji_reset_pos           %d", cfg.jiaxian_duoji_reset_pos);
  ZLOGI(TAG, "jiaxian_duoji_clamp_pos           %d", cfg.jiaxian_duoji_clamp_pos);
  ZLOGI(TAG, "jiaxian_duoji_clamp_torque        %d", cfg.jiaxian_duoji_clamp_torque);
  ZLOGI(TAG, "arm_jiaxian_duoji_reset_pos       %d", cfg.arm_jiaxian_duoji_reset_pos);
  ZLOGI(TAG, "arm_jiaxian_duoji_clamp_pos       %d", cfg.arm_jiaxian_duoji_clamp_pos);
  ZLOGI(TAG, "arm_jiaxian_duoji_clamp_torque    %d", cfg.arm_jiaxian_duoji_clamp_torque);
  ZLOGI(TAG, "scissors_reset_pos                %d", cfg.scissors_reset_pos);
  ZLOGI(TAG, "scissors_cut_pos                  %d", cfg.scissors_cut_pos);
  ZLOGI(TAG, "arm_hook_claws_half_pos           %d", cfg.arm_hook_claws_half_pos);
  ZLOGI(TAG, "arm_hook_claws_full_pos           %d", cfg.arm_hook_claws_full_pos);
  return 0;
}
#if 1
int32_t IntelligentWindingRobotCtrl::initialize(ZModuleDeviceManager* dm, ICmdParser* cmdparse) {
  m_dm       = dm;
  m_cmdparse = cmdparse;

  cmdparse->regCMD("paifei_duoji_moveto_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return paifei_duoji_moveto_reset(); });
  cmdparse->regCMD("paifei_duoji_moveto_press", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return paifei_duoji_moveto_press(); });
  cmdparse->regCMD("raoxiantance_duoji_move_to_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return raoxiantance_duoji_move_to_reset(); });
  cmdparse->regCMD("raoxiantance_duoji_move_to_get_thickness", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) {
    int32_t thickness = 0;
    int32_t err       = raoxiantance_duoji_move_to_get_thickness(ack->getAck(1));
    ack->acktype      = ICmdParserACK::kAckType_int32;
    ack->rawlen       = sizeof(int32_t);
  });
  cmdparse->regCMD("yaxian_duoji_move_to_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return yaxian_duoji_move_to_reset(); });
  cmdparse->regCMD("yaxian_duoji_move_to_press_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return yaxian_duoji_move_to_press_pos(); });
  cmdparse->regCMD("yaxian_duoji_move_to_wait_for_press_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return yaxian_duoji_move_to_wait_for_press_pos(); });
  cmdparse->regCMD("xianlajin_duoji_move_to_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xianlajin_duoji_move_to_reset(); });
  cmdparse->regCMD("xianlajin_duoji_move_to_line_entry_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xianlajin_duoji_move_to_line_entry_pos(); });
  cmdparse->regCMD("xianlajin_duoji_move_to_tight_line_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xianlajin_duoji_move_to_tight_line_pos(); });
  cmdparse->regCMD("xianlajin_duoji_move_to_loose_line_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xianlajin_duoji_move_to_loose_line_pos(); });
  cmdparse->regCMD("jiaxian_duoji_move_to_reset_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return jiaxian_duoji_move_to_reset_pos(); });
  cmdparse->regCMD("jiaxian_duoji_move_to_clamp_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return jiaxian_duoji_move_to_clamp_pos(); });
  cmdparse->regCMD("scissors_move_reset_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return scissors_move_reset_pos(); });
  cmdparse->regCMD("scissors_cut", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return scissors_cut(); });
  cmdparse->regCMD("arm_jiaxian_duoji_move_to_reset_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return arm_jiaxian_duoji_move_to_reset_pos(); });
  cmdparse->regCMD("arm_jiaxian_duoji_move_to_clamp_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return arm_jiaxian_duoji_move_to_clamp_pos(); });
  cmdparse->regCMD("arm_hook_claws_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return arm_hook_claws_reset(); });
  cmdparse->regCMD("arm_hook_claws_move_to_half_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return arm_hook_claws_move_to_half_pos(); });
  cmdparse->regCMD("arm_hook_claws_move_to_full_pos", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return arm_hook_claws_move_to_full_pos(); });
  cmdparse->regCMD("xy_platform_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_platform_reset(); });
  cmdparse->regCMD("z_axis_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return z_axis_reset(); });
  cmdparse->regCMD("z_axis_move_to", "(int32_t pos)", 1, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return z_axis_move_to(atoi(paraV[0])); });
  cmdparse->regCMD("xy_reset", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_reset(); });
  cmdparse->regCMD("xy_move_to_zero", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_move_to_zero(); });
  cmdparse->regCMD("xy_take_clip", "(int32_t index)", 1, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_take_clip(atoi(paraV[0])); });
  cmdparse->regCMD("xy_take_line", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_take_line(); });
  cmdparse->regCMD("xy_take_back_clip", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_take_back_clip(); });
  cmdparse->regCMD("xy_remove_line", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return xy_remove_line(); });
  cmdparse->regCMD("start_winding", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return start_winding(); });
  cmdparse->regCMD("stop_winding", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return stop_winding(); });
  cmdparse->regCMD("reset_and_check_device", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return reset_and_check_device(); });
  cmdparse->regCMD("setcfg", "(const char* cfgname, int32_t cfgvalue)", 2, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return setcfg(paraV[0], atoi(paraV[1])); });
  cmdparse->regCMD("dumpcfg", "()", 0, [this](int32_t paramN, const char** paraV, ICmdParserACK* ack) { return dumpcfg(); });

  return 0;
}
#endif